• Journal of Korean Society for Quality Management
• /
• v.47 no.1
• /
• pp.187-198
• /
• 2019

Purpose: In this study, a reliability prediction based reliability growth management is suggested especially for the early development phase of a system and the case study of surveillance system is given. Methods: The proposed reliability prediction based reliability growth management procedures consists of 7 Steps. In Step 1, the stages for reliability growth management are classified according to the major design changes. From Step 2 to Step 5, system reliability is predicted based on reliability structures and the predicted reliabilities of subsystems (Level 2) and modules (Level 3). At each stage, by comparing the predicted system reliability with that of the previous stage, the reliability growth of the system is checked in Step 6. In Step 7, when the predicted value of sustem reliability does not satisfy the reliability goal, some design alternatives are considered and suggested to improve the system reliability. Results: The proposed reliability prediction based reliability growth management can be an efficient alternative for managing reliability growth of a system in its early development phase. The case study shows that it is applicable to weapon system such as a surveillance system. Conclusion: In this study, the procedures for a reliability prediction based reliability growth management are proposed to satisfy the reliability goal of the system efficiently. And it is expected that the use of the proposed procedures would reduce, in the test and evaluation phase, the number of corrective actions and its cost as well.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.2
• /
• pp.49-57
• /
• 2018

The main objective of this paper is come up with methodology approach for FPGA-based system in verification and validation lifecycle regarding software reliability using system engineering approach. The steps of both reverse engineering and re-engineering are carried out to implement an FPGA-based of safety critical system in Nuclear Power Plant. The reverse engineering methodology is applied to elicit the requirements of the system as well as gain understanding of the current life cycle and V&V activities of FPGA based-system. The re-engineering method is carried out to get a new methodology approach of software reliability, particularly Software Reliability Growth Model. For measure the software reliability of a given FPGA-based system, the following steps are executed as; requirements definition and measurement, evaluation of candidate reliability model, and the validation of the selected system. As conclusion, a new methodology approach for software reliability measurement using software reliability growth model is developed.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1422-1431
• /
• 2015

The reliability of power system components can be affected by a numbers of factors such as the health level of components, external environment and operation environment of power systems. These factors also affect the electrical parameters of power system components for example the thermal capacity of a transmission element. The relationship of component reliability and power system is, therefore, a complex nonlinear function related to the above-mentioned factors. Traditional approaches for reliability assessment of power systems do not take the influence of these factors into account. The assessment results could not, therefore, reflect the short-term trend of the system reliability performance considering the influence of the key factors and provide the system dispatchers with enough information to make decent operational decisions. This paper discusses some of these important operational issues from the perspective of power system reliability. The discussions include operational reliability of power systems, reliability influence models for main performance parameters of components, time-varying reliability models of components, and a reliability assessment algorithm for power system operations considering the time-varying characteristic of various parameters. The significance of these discussions and applications of the proposed techniques are illustrated by case study results using the IEEE-RTS.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.7
• /
• pp.357-363
• /
• 2002

The target reliability values are defined for the train, signaling, rail track and electric power supply system of the LRT under development. The allocation of the reliability value is based on the failure rate and the failure type in the Korean subways. The reliability allocation in the train system is the made ore detail than others. The purpose of the allocation is to verify the reliability value of the results from each of the development stage, which could be the designing, manufacturing and purchasing work. The reliability of braking system, traction system, door system and other control system could be verified by establishing reliability models of these system. It could also enable us to estimate and analyse the reliability value and redo the work if necessary to achieve the shooting reliability value. A guide to the LRT reliability criteria is to be prepared after running test on the test track.

• International Journal of Reliability and Applications
• /
• v.9 no.2
• /
• pp.153-165
• /
• 2008

This paper discusses the reliability equivalences of a series-parallel system. The system components are assumed to be independent and identical. The failure rates of the system components are functions of time and follow Weibull distribution. Three different methods are used to improve the given system reliability. The reliability equivalence factor is obtained using the reliability function. The fractiles of the original and improved systems are also obtained. Numerical example is presented to interpret how to utilize the obtained results.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.483-494
• /
• 2009

Since the embedded system is more intelligent, the importance of the reliability in the embedded system is a lot more visible. Especially the reliability of the embedded system in the train control system is even better important. As the special quality of the embedded system, the hardware of the system is directly controlled by the software in the embedded system. As the expansion of complexity, the expense amd the time for verification is required more and more. This paper is presented the verification of the reliability as the method with background of failure Embedded system is gradually, the importance of 'A built-in on the system embedded system's reliability is focused. In particular, in the train control system built-in of the embedded system, reliability is even more important. The embedded system of the system controls over hardware, software with built-in directly. The more complex system is, the more increasable of depending on the reliability of the time verification and expensive is. This paper is about he characteristics of the reliability and verification of embedded system under the failure mechanisms, based on the verification methodology suggested by in the train control system.

• International Journal of Reliability and Applications
• /
• v.9 no.1
• /
• pp.79-93
• /
• 2008

The aim of this work is to generalize reliability equivalence techniques to apply them to a system consists of two independent and non-identical components connected in series(parallel) system, that have constant failure rates. We shall improve the system by using one component only. We start by establishing two different types of reliability equivalence factors, the survival reliability equivalence (SRE) and mean reliability equivalence (MRE) factors. Our second studies, introducing some applications for our studies in airports and our life. Also, we introduced some numerical results.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.3
• /
• pp.50-53
• /
• 2007

Improving the reliability or long-term dependability of a system requires a different approach from the previous emphasis on short-term concerns. The purpose of this paper is to present a reliability evaluation method for an oil cooler intended for high-precision machining centers. The oil cooler system in question is a cooling device that minimizes the deformation caused from the heat generated by driving devices. This system is used for machine tools and semiconductor equipment. We predicted the reliability of the system based on the failure rate database and conducted the reliability test using a test-bed to evaluate the life of the oil cooler. The results provided an indication of the reliability of the system in terms of the failure rate and the MTBF of the oil cooler system and its components, as well as a distribution of the failure mode. These results will help increase the reliability of oil cooler systems. The evaluation method can also be used to determine the reliability of other machinery products.

• Journal of Applied Reliability
• /
• v.14 no.1
• /
• pp.29-35
• /
• 2014

To improve the reliability of a weapon system, we perform the activities: setting the target reliability, reliability allocation, and reliability management, etc. Before starting weapon system development, the target reliability of system is set through advanced research and is allocated to its subsystems at the beginning of development. Then we manage the reliability of system and subsystems to meet the target reliability until completion of system development. In this paper, we research representative reliability allocation methods and introduce the suitable reliability allocation method followed by its application to the underwater guided weapon system. The purpose of this research is to review the proposed reliability allocation techniques and find an appropriate method for underwater weapon systems followed by the validation of its application.

• Journal of the Korean Society for Railway
• /
• v.10 no.3 s.40
• /
• pp.319-326
• /
• 2007

During the design phase of a system, which requires high reliability and safety such as aircraft, high speed train and nuclear power plant, reliability engineer must set up the target system reliability. To meet a reliability goal for the system, reliability allocation should be done gradually from the system to its element. For this end, first of all, we need to construct functional block diagram based on the design output and PWBS(Project Work Breakdown System). Another important input data for reliability allocation is the relationship between the cost and the reliability. In this study we investigate various reliability allocation models, which can be applicable to aircraft, vehicle, and power plant, and etc. And we suggest a proper reliability allocation model which can be effectively applicable to KTX-II high speed train to achieve the target system reliability.