• Journal of the Korea Concrete Institute
• /
• v.26 no.1
• /
• pp.13-21
• /
• 2014

To quantitatively evaluate the influence of ground granulated blast-furnace slag (GGBS) as a supplementary cementitious material on the life-cycle environmental impact of concrete, a comprehensive database including 3395 laboratory mixes and 1263 plant mixes was analyzed. The life-cycle assesment studied for the environmental impact of concrete can be summarized as follows: 1) the system boundary considered was from cradle to pre-construction; 2) Korea life-cycle inventories were primarily used to assess the environmental loads in each phase of materials, transportation and production of concrete; and 3) the environmental loads were quantitatively converted into environmental impact indicators through categorization, characterization, normalization and weighting process. The life-cycle environmental impacts of concrete could be classified into three categories including global warming, photochemical oxidant creation and abiotic resource depletion. Furthermore, these environmental impacts of concrete was significantly governed by the unit content of ordinary portland cement (OPC) and decreased with the increase of the replacement level of GGBS. As a result, simple equations to assess the environmental impact indicators could be formulated as a function of the unit content of binder and replacement level of GGBS.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.26-35
• /
• 2019

This study aims to introduce and economical review on the possibilities of rare earth elements(REEs) recovery from coal ashes and the analysis of economical evaluation factors based on the data for securing domestic rare earth elements. The cut-off grade of REEs on recovering from coal ash was confirmed to be 1,000 ppm on total rare earth oxides(TREO) basis, and while the economic value of coal ash changed with contents and specific elements of rare earth elements. This shall be resulted in the price differences of rare earth elements required by the current industry, and it probably varies depending on the future demand of rare earth components. For developing of commercial recovery technology on REEs in coal ashes, many researches have been carried out by various analyzing methods, such as evaluation of holding value of REEs in ashes, assessment between supply and demand of industry, comparison of investment and its profitability for the REEs's production from coal ashes, and so on. Although these methods have been suggested, its recovery system with economical feasibility could not been confirmed up to present. In this reason, the process design of recovering REEs from coal ash shall be researched continuously to solve the problems of the global rare earth market. And also these researches shall be conducted actively in Korea for the purpose of securing the REEs resources and their recovering technologies.

• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.515-520
• /
• 2016

This study conducted the research about the positive effects of Gynura Procumbens on preventing dermatitis and infectious diseases the contemporary people have. To do it, this study measured the concentration of NF-kB, the extract of Gynura Procumbens. In this regard, cytosol, the extract of Gynura Procumbens, and nucleus went through the separation process. The concentration of major NF-kB among various factors to control inflammation was measured with the use of HDF cell. Regarding RAW264.7 cell, the amounts of NO to play an important role in reacting the skin immune system as the media of neural transmission were analyzed. The outcome about the extracts of Gynura Procumbens injected show that it can be expected that as the NF-kB protein and mRNA band were reduced, Gynura Procumbens would have anti-inflammatory effects that could contribute to preventing dermatitis and diseases. In addition, the extracts of Gynura Procumbens have significantly reduced NO with their concentration increasing. In other words, Gynura Procumbens are considered to regulate dependently the production of NO in the concentration of extracts. Thus there is an expectation that the more intensive research would be conducted to heal dermatitis. And it is deemed that Gynura Procumbens would be used as materials for cosmetics as well as foods that the contemporary people can widely consume if a more careful research about anti-inflammatory effects would be sustained on a human bodies' clinical level.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.12
• /
• pp.635-640
• /
• 2016

Although microbial fuel cell (MFC) can produce electricity from organics in wastewater, nitrogen removal is required for application of process for wastewater treatment plant. This study developed flat-panel air-cathode MFCs (FA-MFCs) comprised of two large separator electrode assemblies (SEAs) and evaluate total nitrogen removal according to three inoculum sources and pre-nitrification acclimation. The nitrification efficiencies were >99% regardless of inoculum sources under the phase for pre-nitrification acclimation. The total nitrogen removal efficiencies of FA-MFCs without pre-nitrification acclimation were the highest at the low organic conditions (<300 mg-COD/L) under the phase for nitrification and denitrification. The increase of organic concentration influenced the total nitrogen removal efficiency, positively. The organics were removed >95% but were not used for heterotrophic denitrification totally. This study suggests that application of FA-MFC system for wastewater treatment can allow the simultaneous removal of organic and nitrogen compounds, although this affects the low electricity production.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1028-1034
• /
• 1999

Poly(lactic acid) is expected to be one of the most promising biodegradable polymers. However, the high molecular weight polymer could be obtained by ring-opening polymerization process conventionally, which raises the production cost and decreases the final yield. In this study, linear and star-shaped poly(L-lactic acid)s were prepared by direct solution polycondensation method and their physical and thermal properties were examined. Tin compounds were found to be effective catalyst for the preparation of high molecular weight polymers. When 0.2g (0.5 wt % of monomer) of $SnCl_2$ and 100 mL of p-xylene were used, the polymer yield and molecular weight were relatively high. As a means to obtain higher molecular weight polymer easily in the direct polycondensation system, dipentaerythritol(dipet) or pentaerythritol(pet) was introduced as a multifunctional branching monomer to provide a star-shaped poly(lactic acid). Moderately high molecular weight polymers with the inherent viscosity values up to 1.14 dL/g(weight-average molecular weight of about 140000 by GPC) were obtained and could be cast strong and transparent films.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.175-180
• /
• 2008

The objective of this study was to investigate biosorption of organic matter on EPS(Extracellular Polymeric Substances) at different SRT(Sludge Retention Time) in a SBR(Sequencing Batch Reactor) process, which was operated with the following operation steps : Fill-React-Settle-Decant-Idle. The hydraulic retention time was set to be 24 hours. The results obtained from this study showed that the organic removal efficiency per unit microbial biomass decreased with increasing SRT, and the corresponding EPS amount also did. The percent removal of organic by biosorption increased with SRT, and it reached to 53.2% at SRT of 30 days. However, the highest biosorption per microbial biomass(48.6 mgCOD/gVSS) was found at SRT of 2 days. The EPS analysis was performed by measuring TSS, TCOD$_{Cr}$, and TKN. The EPS production per unit microbial biomass was observed to be high at a low SRT. Due to the above result, the floc formation was hindered and therefore poor settlement of sludge resulted in decreasing the COD removal efficiency. It was therefore concluded that the consideration of the system design should include the characteristic of EPS as well as other factors such as SRT, MLSS, and organic loading.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.454-458
• /
• 2006

HSF1 is the heat shock transcription factor in Saccharomyces cerevisiae. S. cerevisiae KNU5377 can ferment at high temperature such as $40^{\b{o}}C$. We have been the subjects of intense study because Hsf1p mediates gene expression not only to heat shock, but to a variety of cellular and environmental stress challenges. Basing these facts, we firstly tried to construct the hsf1 gene-deleted mutant. PCR-method for fast production of gene disruption cassette was introduced in a thermotolerant yeast S. cerevisiae KNU5377, which allowed the addition of short flanking homology region as short as 45 bp suffice to mediate homologous recombination to kanMX module. Such a cassette is composed of linking genomic DNA of target gene to the selectable marker kanMX4 that confers geneticin (G418) resistance in yeast. That module is extensively used for PCR-based gene replacement of target gene in the laboratory strains. We describe here the generation of hsf1 gene disruption construction using PCR product of selectable marker with primers that provide homology to the hsf1 gene following separation of haploid strain in wild type yeast S. cerevisiae KNU5377. Yeast deletion overview containing replace cassette module, deletion mutant construction and strain confirmation in this study used Saccharomyces Genome Deletion Project (http:://www-sequence.standard.edu/group/yeast_deletion_project). This mutant by genetic manipulation of wild type yeast KNU5377 strain will provide a good system for analyzing the research of the molecular biology underlying their physiology and metabolic process under fermentation and improvement of their fermentative properties.

• Journal of Food Hygiene and Safety
• /
• v.33 no.1
• /
• pp.38-43
• /
• 2018

A few authors have already investigated microbial contamination of leafy vegetables in distribution condition and examined the effect of temperature abuse on microbial safety or product quality. But this study analyzed proliferation of indicator microorganisms and food poisoning bacteria in real situation in Korean agroindustry and investigated washing effect of micobial contamination on leaf surface. Leafy vegetables were found to be contaminated with aerobic bacteria at $0.1{\sim}0.32{\times}10^3CFU/g$. Staphylococcus aureus and Bacillus cereus were detected in leafy vegetables at $0{\sim}0.54{\times}10^3CFU/g$. However, Salmonella spp., Coliforms, Clostridium spp. and Listeria spp. were not detected in any samples. Indicator microorganisms and food poisoning bacteria on leafy vegetables increased at room temperature when simulatively distributed condition. After clean-up, the indicator microorganisms and food poisoning bacteria of kimchi cabbage, lettuce and perilla leaf were decreased to a very low level. This study suggests that it is necessary to improve the level of hygiene management such as use of cold chain system and hygiene management of transport tools during the distribution process for fresh leafy vegetables.

• Resources Recycling
• /
• v.19 no.3
• /
• pp.52-61
• /
• 2010

In general, the waste concrete is simply crushed and reused as a recycled aggregate at a low value application such as back filling material. It because that the quality of recycled aggregate is lower than one of natural aggregate due to the insufficient liberation of aggregate and cement mortar. So in this study, the liberation characteristics of liberation of aggregate and cement mortar is analyzed to investigate the limitation of conventional crushing stage at waste concrete processing circuit. In this process, thermal treatment method is evaluated for the enhancement of liberation. From test results, the preferential breakage along the grain boundary is not accomplished by the conventional crushers. It leads a low quality of recycled aggregate and a fracture of aggregate. To solve these problems, gentle breakage is used as a breakage mechanism to induce preferential breakage along the grain boundary. The recycled aggregate produced from the free fall test, which adopts a gentle breakage, shows a better liberation characteristics and a higher quality.

• Health Policy and Management
• /
• v.5 no.2
• /
• pp.35-69
• /
• 1995

The managerial environment of hospitals in Korea characterized by low levels of medical insurance fees is worsening by increasing government regulations as to the utilization of medical services, rising costs of labor, material, and medical equipments, growing patient expectations concerning the quality of services, and escalating competitions among large hospitals in the market. Hospitals should seek for their survival strategies in this harsh environment and they should have information about costs of their products in doing so. However, it has not been available due to the complexity of the production process of hospital services. The objectives of this study were to develop a service-based cost accounting model and to apply the developed model to a study hospital to obtain cost information of hospital services. A model commonly used for the job-order product cost accounting in the manufacturing industry was modified for the use in hospitals in Korea. Actual costs, instead of standard costs, incurred to produce a unit of services during a given period of time were estimated in the model. Data required to implement the model included financial information, statistics for the allocation of supportive cost center costs to final cost centers, statistics for the allocation of final cost center costs to services, and the volume of each services charged to patients during a study period. The model was executed using data of a university teaching hospital located in Seoul for the fiscal year 1992. Data for financial information, allocation statistics fo supportive service costs, and the volume of services, most of them in electronic form, were available to the study. Data for allocation statistics of final cost center costs were collected in the study. There were 15 types of evaluation and management service, 2, 923 types of technical service, and 2, 608 types of drug and material service charged to patients in the study hospital during the fiscal year 1992. Labor costs of each of seven types of pesonnel, material costs of 611 types of drugs and materials, and depreciation costs of 212 types of medical equipments, miscellaneous costs, and indirect costs incurred in producing a unit of each services were estimated. Medical insurance fees for basic services such as evaluation and management of inpatients and outpatients, injection, and filling prescriptions, and for operating procedures were found to be set lower than costs. Infrequent services which use expensive medical equipments showed negative revenuse as well. On the other hand, fees for services not covered by the insurance such as CT, MRI and Sonogram, and for laboratory tests were higher than costs. This study has a significance in making it possible for a hospital to obtain cost information for all types of services which produced income based on all types of expenses incurred during a given period of time. This information can assist the management of a hospital in finding an effective cost reduction strategy, an efficient service-mix strategy under a given fee structure, and an optimum strategy for within-hospital resource allocations.