• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1859-1864
• /
• 2004

An effective methodology is reported for the optimal design of multisite batch production/transportation and storage networks under uncertain demand forecasting. We assume that any given storage unit can store one material type which can be purchased from suppliers, internally produced, internally consumed, transported to or from other plant sites and/or sold to customers. We further assume that a storage unit is connected to all processing and transportation stages that consume/produce or move the material to which that storage unit is dedicated. Each processing stage transforms a set of feedstock materials or intermediates into a set of products with constant conversion factors. A batch transportation process can transfer one material or multiple materials at once between plant sites. The objective for optimization is to minimize the probability averaged total cost composed of raw material procurement, processing setup, transportation setup and inventory holding costs as well as the capital costs of processing stages and storage units. A novel production and inventory analysis formulation, the PSW(Periodic Square Wave) model, provides useful expressions for the upper/lower bounds and average level of the storage inventory. The expressions for the Kuhn-Tucker conditions of the optimization problem can be reduced to two sub-problems. The first yields analytical solutions for determining lot sizes while the second is a separable concave minimization network flow subproblem whose solution yields the average material flow rates through the networks for the given demand forecast scenario. The result of this study will contribute to the optimal design and operation of large-scale supply chain system.

• Journal of The Korean Association of Information Education
• /
• v.24 no.1
• /
• pp.99-106
• /
• 2020

In this paper, we analyzed the units related to robot education in the Practical Arts textbooks according to the 2015 revised curriculum. As a result, all textbooks had a common system of introduction, development, and organization, and all of them showed a similar flow. Learning objectives were presented in all textbooks, but no affective goals were presented except cognitive and functional goals. The contents of robot learning suggest the meaning and type of robots, the structure and sensors of robots, and the activities of making robots, but the contents of robot ethics, the production and activities of various robot works, and the use of robots in the problem solving process are not presented. The assembly robot and the infrared sensor are used in common, and it consists of presenting robot production and control training materials in experience activities and arranging units through evaluation, and the A, C, and F textbooks also provide the unit auxiliary data. In the future, it will be necessary to include the contents of robot ethics education centered on the design/manufacturer and user-oriented robot ethics such as the recognition of the limits of robots, the principles of using robots correctly, safety education, personal information and privacy protection.

• Journal of the Korea Convergence Society
• /
• v.7 no.6
• /
• pp.29-34
• /
• 2016

Nowadays, real-time devices that provide health care for a companion animal is being developed by IoT technology and its demand such as smart puppy tag is increasing. However, it is difficult for IoT devices of companion animals to process complex nature due to miniaturized hardware and constructive nature. There is a clear limit to custom advanced features like health care implementation. This paper designs an integrated platform with statistical analysis which makes it possible to customized services such as feed production, pharmaceutical production, and health care for each companion animal. Middleware that collects sensor information, customer's spending pattern and information from Social Network Service is also designed by making use of IoT devices which companion animals wear. Furthermore, the paper designed data analyzer which analyzes and refines data from collected information that can be applied to personalized services.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.31 no.1
• /
• pp.52-58
• /
• 2017

This study was aimed to examine relaxing effects of Acanthopanacis cortex(AC) through nitric oxide(NO) production and phosphodiesterase type 5(PDE-5) inhibition in corpus cavernosum. In order to define the relaxation effects of AC extract, rabbit corpus cavernous tissues were prepared in $2{\times}2{\times}8mm$ sized strip. AC extract ($0.01-3.0mg/m{\ell}$) were treated in contracted strips induced by phenylephrine(PE) and $N{\omega}$-nitro-L-arginine (L-NNA) was treated before AC extract-treated. And calcium chloride($Ca^{2+}$) 1 mM was infused into precontracted strips after pretreatment of AC extract in $Ca^{2+}-free$ krebs-ringer solution. When AC extract was applied to human umbilical vein endothelial cell(HUVEC), cell viability was measured by MTT assay, and NO concentration was measured by Griess reagent system. Ratio of smooth muscles to collagen fibers and eNOS, PDE-5 positive reaction were measured by histochemical and immunohistochemical process on mice corpus cavernosum. AC extract significantly affected relaxion of the cavernous strips, and the pretreatment of L-NNA inhibited AC extract-induced relaxation. Contraction induced by the addition of $Ca^{2+}$ was inhibited by treatment with the AC extract in $Ca^{2+}-free$ solution. In AC group, NO concentration, ratio of smooth muscle to collagen fibers, and eNOS positive reaction were increased, PDE-5 positive reaction was decreased compared to PE group. As a result of the above experiment, it was thought that AC extract inhibits the inflow of extracellular $Ca^{2+}$ by activating cGMP through the increase of eNOS / NO and the decrease of PDE-5 which inhibits cGMP activity, in the corpus cavernosum.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.107-114
• /
• 1999

The large-scale distribution of crops Is usually determined by climate. We present the results of a climate-crop prediction based on spatial bio-physical process model approach, implemented in a GIS (Geographic Information System) environment using several regional and global agriculture-environmental databases. The model utilizes daily climate data like temperature, rainfall, solar radiation being generated stocastically by in-built model weather generator to determine the daily biomass and finally the crop yield. Crops are characterized by their specific growing period requirements, photosynthesis, respiration properties and harvesting index properties. Temperature and radiation during the growing period controls the development of each crop. The model simulates geographic/spatial distribution of climate by which a crop-growing belt can also be determined. The model takes both irrigated and non-irrigated area crop productivity into account and the potential increase in productivity by the technical means like mechanization is not considered. All the management input given at the base year 1995 was kept same for the next twenty-year changes until 2015. The simulated distributions of crops under current climatic conditions coincide largely with the current agricultural or specific crop growing regions. Simulation with assumed weather generated derived climate change scenario illustrate changes in the agricultural potential. There are large regional differences in the response across the country. The north-south and east-west regions responded differently with projected climate changes with increased and decreased productivity depending upon the crops and scenarios separately. When water was limiting or facilitating as non-irrigated and irrigated area crop-production effects of temperature rise and higher $CO_2$ levels were different depending on the crops and accordingly their production. Rise in temperature led to yield reduction in case of maize and rice whereas a gain was observed for wheat crop, doubled $CO_2$ concentration enhanced yield for all crops and their several combinations behaved differently with increase or decrease in yields. Finally, with this spatial modeling approach we succeeded in quantifying the crop productivity which may bring regional disparities under the different climatic scenarios where one region may become better off and the other may go worse off.

• Journal of Environmental Health Sciences
• /
• v.39 no.5
• /
• pp.391-407
• /
• 2013

Micropollutants emerge in surface water through untreated discharge from sewage and wastewater treatment plants (STPs and WWTPs). Most micropollutants resist the conventional systems in place at water treatment plants (WTPs) and survive the production of tap water. In particular, pharmaceuticals and endocrine disruptors (ECDs) are micropollutants frequently detected in drinking water. In this review, we summarized the distribution of micropollutants at WTPs and also scrutinized the effectiveness and mechanisms for their removal at each stage of drinking water production. Micropollutants demonstrated clear concentrations in the final effluents of WTPs. Although chronic exposure to micropollutants in drinking water has unclear adverse effects on humans, peer reviews have argued that continuous accumulation in water environments and inappropriate removal at WTPs has the potential to eventually affect human health. Among the available removal mechanisms for micropollutants at WTPs, coagulation alone is unlikely to eliminate the pollutants, but ionized compounds can be adsorbed to natural particles (e.g. clay and colloidal particles) and metal salts in coagulants. Hydrophobicities of micropollutants are a critical factor in adsorption removal using activated carbon. Disinfection can reduce contaminants through oxidation by disinfectants (e.g. ozone, chlorine and ultraviolet light), but unidentified toxic byproducts may result from such treatments. Overall, the persistence of micropollutants in a treatment system is based on the physico-chemical properties of chemicals and the operating conditions of the processes involved. Therefore, monitoring of WTPs and effective elimination process studies for pharmaceuticals and ECDs are required to control micropollutant contamination of drinking water.

• Fashion & Textile Research Journal
• /
• v.19 no.3
• /
• pp.296-301
• /
• 2017

This study researched the status and prospect of a natural dye program in Gyeongsang region that focused on private centers with sufficient infrastructure and abundant human resources were available for natural dyes. The entire site for metropolitan cities that have difficulty in securing the land are limited (as well as smaller) because they are closer to the city; in addition, they do not own the drying house and the agricultural land for natural dyes. It is understood that the one-time program of all centers researched help to promote and maintain the centers rather than generating profit; in addition, it is shown that Jun - Aug (summer) is preferred over Dec - Feb (winter). This program uses natural indigo; consequently, natural dye program for hobby and education is operated when it is required because the number of participants are low in most cases, Persimmon Juice is used for the dyeing raw materials. Programs in operation are often outsourced with other institutes registered under private certification system; therefore, many cases of starting business are found in the institutes operating programs directly after obtaining the certification. Their plans do not allow for investment in facility such as enlargement of experience center and prospect of program; in addition, business value is generally bright for business strategies that include an exhibition shop for natural dye products and program development.

• Archives of design research
• /
• v.16 no.2
• /
• pp.365-374
• /
• 2003

Recently many TV have much interest in Network Design to get an advantage in the competition of the multi channels as part of the channel brand strategy. Since the Network Design was introduced in Korea in 1997, the major cable channels and satellite channels began to display Network Design on their screen competitively. But the production of Network Design has many problems in the field due to the lack of research information. The style guide is considered very important to succeed in Network Design execution as an indispensible process for a consistent planning and concrete production. This paper studied the Network Design Style Guide to establish a theoretical system of Network Design for a TV channel image promotion. First, this paper discussed the concept of Network Design and the necessity of the Network Design Style Guide, Second, this paper systemized the main component through the case study of the Network Design Style Guide and defined the concept of each element.

• The Journal of the Korea Contents Association
• /
• v.6 no.4
• /
• pp.89-97
• /
• 2006

Such changes that the digital paradigm brought propels a change of the value system itself in the existing society so that a way of thinking that differentiates oneself from others is getting much stronger. As public interests are higher in the image production on the internet, such authoring environments as development of related technologies, expansibility of information, and systematization of available information continue to change. Therefore, a variety of unique image presentations that fit to the changed environments are necessary and an expression method is indispensable for such image production. This study focuses on digital image creating in which a synectics method is applied. It suggests digital image application methods and examples that contain not just simple image distortion or variation but intrinsic significance. It is believed that it will be of good use to produce a variety of unique and innate digital images in the end.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.167-181
• /
• 2008

There are lack of labour and increase in logistics costs due to rapid change in logistics environments and the demand for logistics. The reality is that over spending on logistics costs are getting worse due to lack of logistics standardization. An example will be excessive logistics costs caused by unsatisfactory use of logistics equipments in wholesale markets. The logistics efficiency is falling due to delays in using logistics equipments and standardization. Therefore, there needs standardization of logistics functions and unit of handling in each stage from packing, unloading, storage, transporting, logistics information and needs logistics standardization on equipments, machineries used for the above. Standard unified with standardization is called specification and if standardization is applied broadly in manufacturing or processing, inspection than each process in terms of production can be managed rationally and labour skills will improve and product quality will be evenly maintained and compatability of each part in terms of assembly will be maintained thus materials and labour could be saved thus results in increasing productivity and lowering production costs. Also, if it is applied in industry at state-level then there will be rationalization in consumption in circulation as in purchase of raw materials, sales of products, purchase of products by consumers and contribute in improving compatibility and fair transactions. This paper is aimed to help in first solving factors affecting the most in improving logistic efficiency among unit load system and logistic hollowization, standardizing logistics base, standardizing logistics information. The study conducted surveys on limited companies but hope that in the future the target companies can be divided further into types, industries and conduct more demonstrative analysis.