• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.65-70
• /
• 2022

In manufacturing and semiconductor industries, transfer robots increase productivity through accurate and continuous work. Due to the nature of the semiconductor process, there are environments where humans cannot intervene to maintain internal temperature and humidity in a clean room. So, transport robots take responsibility over humans. In such an environment where the manpower of the process is cutting down, the lack of maintenance and management technology of the machine may adversely affect the production, and that's why it is necessary to develop a technology for the machine failure diagnosis system. Therefore, this paper tries to identify various causes of failure of transport robots that are widely used in semiconductor automation, and the Prognostics and Health Management (PHM) method is considered for determining and predicting the process of failures. The robot mainly fails in the driving unit due to long-term repetitive motion, and the core components of the driving unit are motors and gear reducer. A simulation drive unit was manufactured and tested around this component and then applied to 6-axis vertical multi-joint robots used in actual industrial sites. Vibration data was collected for each cause of failure of the robot, and then the collected data was processed through signal processing and frequency analysis. The processed data can determine the fault of the robot by utilizing machine learning algorithms such as SVM (Support Vector Machine) and KNN (K-Nearest Neighbor). As a result, the PHM environment was built based on machine learning algorithms using SVM and KNN, confirming that failure prediction was partially possible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.49-55
• /
• 2017

Most motor cases adopt deep drawing products, which are excellent in waterproof functions, concentricity, right angle, and quality. In addition, the blower motor and seat motor, which are installed in the car interior and do not require waterproof function, adopts a multi-forming manufacturing method. The deep drawing process requires an expensive transfer press that can digest approximately 12 processes, such as drawing, trimming and piercing. On the other hand, products can be produced with low investment because the multi-forming method is composed of one multi-forming machine or one multi-forming machine and one press. The multi-forming machine is a high-priced facility that is mostly imported and a bending / shearing process multi-foaming machine, which was developed by domestic small and medium-sized enterprises, is not enough to reduce the production cost. An integral multi - forming machine is used as a limited working method for thin material and small products. A large product and thick material has a high shear load. A large product and thick material has a high shear load and uses a single crank press. After blanking, the worker manually feeds the material to a multi-forming machine. When the bending operation is performed in the multi-forming machine, it is transferred to the press again to calibrate the dimensions. This variance in work processes has resulted in lower cost competitiveness due to the lower productivity, quality issues, and excessive operator input. The aim of this study was to establish a stable and cost - effective production system through bending / shearing process separation and facility automation.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.453-466
• /
• 2020

As the demand for eco-friendly energy increases to overcome the energy shortage and environmental pollution crisis, hydrogen economy has been proposed as a potential solution. Accordingly, an economical and efficient hydrogen production is considered to be an essential industrial process. Research on applying hydrogen separation membranes for H₂/CO₂ separation to the production of highly concentrated hydrogen by purifying H₂ and capturing CO₂ simultaneously from synthetic gas produced by gasification is in progress nowadays. In high temperature environments, the membrane separation process using glassy polymeric membrane with H₂ selectivity has the potential for CO₂ capture performance, and is an energy and cost effective system since polybenzimicazole (PBI)-based separators show excellent chemical and mechanical stability under high-temperature operation conditions. Thus, the development of high-performance PBI hydrogen separators has been rapidly progressing in recent years. This overview focuses on the recent developments of PBI-based membranes including structure modified, cross-linked, blended and carbonized membranes for applications to the industrial hydrogen separation process.

• Journal of Practical Engineering Education
• /
• v.10 no.1
• /
• pp.17-24
• /
• 2018

Through the design and production of works for the third semester as a major unit, It is proposed the process of satisfying the graduation standards with the design and production process of the drone which can be applied to various mobile environments. Using the shape of Ring Propeller, it is made to be able to play both the role of generating lift as a propeller and the role of a wheel that touches the ground through the surface of the rim. In addition, the Servo Motor is used to convert the drive shaft of the motor to the correct angle according to the command. Then, based on the idea, the 3D printing is implemented to confirm the result of the configuration, and the circuit for driving the propulsion is designed and manufactured. As a result, the conversion of the desired propulsion system during air navigation and operation failed due to the weight increase of the propellant. It is confirmed that the size of the thrust and the tolerance limit of the ring propeller are the errors. Through these processes, it has been recognized to have experience of creative thinking and cooperation through engineering approach and comprehensive design, and confirmed to satisfy the graduation criteria by writing an engineering paper on the result.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.201-210
• /
• 2022

Expanded polystyrene (EPS) is the most commonly used fresh food refrigeration insulation in Korea and Europe. Moreover, as the use of disposable packaging materials has increased significantly along with non-face-to-face delivery services since the COVID-19 crisis, social issues related to waste disposal are also being raised. Therefore, in this study, the life cycle of EPS boxes for fresh food is focused on the factors that have a large difference between incineration and landfill including recycling in Europe and Korea in the disposal process after use, and raw materials and energy in the manufacturing process, which account for a large portion of the environmental impact value. We tried to compare the environmental impact of evaluation. Overall, the raw material production stage, box manufacturing stage, and packaging stage have similar processes in Europe and Korea, but unlike Europe, Korea, which lacks landfills and incineration facilities, has focused on expanding the recycling rate. It was necessary to do an environmental impact assessment. Data affecting the environment were derived based on 2019 and 2020 data for Korea and 2017 and 2020 data for Europe. In order to predict the future environmental impact assessment, assumptions about the disposal rate in 2025 and 2030 were introduced and evaluated. As a result of this study, it was found that the raw material production stage of EPS boxes, which have similar processes in both Korea and Europe, has the greatest effect on the global warming effect of Korean EPS boxes. However, Korea, which has a relatively high recycling rate in the disposal process compared to incineration and landfill, showed better environmental performance than Europe in most impact indicators except freshwater eutrophication. In particular, Korea has increased the overall recycling rate compared to Europe by replacing various recyclable materials such as building materials and sundries with XPS (extruded polystyrene) recycled materials. In conclusion, it was found that increasing the recycling rate rather than incinerating and landfilling EPS boxes for fresh food in the domestic EPS industry has relatively less environmental load compared to Europe.

• Analyses & Alternatives
• /
• v.6 no.2
• /
• pp.185-226
• /
• 2022

This study examines the crisis of trust of French journalism in the context of a global decline of media credibility. First of all, in the process of a huge social movement called the 'yellow vest' movement that started in 2018, distrust of the French journalism was expressed in an extreme form. This study examines some external factors in terms of the historical development of the French journalism and the public's long-standing 'criticism of journalism'. Specifically, this study first examines the quantitative indicators of trust of French journalism which were shown in Digital News Report published by the Reuters Institute for the Study of Journalism. Next, it examines the historical and institutional formation process of French journalism and public distrust that emerged along with it. And specifically, the structural crisis-economic crisis, digital transformation and intensification of competition, and deterioration of quality problems etc.-of the French journalism exposed in media coverage on social movement in 2018 is review in relation with the working process or 'routine' of actual news production. In conclusion, this study asserts that the various aspects of internal rifts in French journalism system, as well as external shocks (the influence of social movements), are a key factor in explaining the recent decline of trust in French journalism.

• (The) Research of the performance art and culture
• /
• no.39
• /
• pp.863-901
• /
• 2019

This paper deals with the process of developing a traditional culture content based on the historical spread of Jajimu, an ethnic dance of ancient Tashkent(Chach), to Tang China and then to Goryeo in Korean peninsula. Jajimu as a solo dance form was a very enegetic dance form that reflects the dynamic nature of namadic life, and it enjoyed high popularity in Tang China due to its exotic style after the 8th century A.D. Later, it gave a birth to a derivative duet dance form called Ssangjaji or Guljaji, an highly sophisticated elegant court dance item that reflects the aesthetic taste of Tang China. Further, the Ssangjaji was flowed into Georyeo around in the 11th century or earlier, and was transformed into a Korean court dance while renaming it as Yeonhwadae that means 'lotus pedestal'. I tried the production of a special performance which displys those three dance forms on same stage to demonstrate the historical connection of ancient Asian dance. It was not easy to restore the music, dance and costume of Jajimu and Ssangjaji because of limited historical materials whereas those of Korean Yeonhwadae have been well preserved and transmitted owing to old dance and music notation system. A large amount of audio, visual materials were collected and analysed to overcome those limits, and its result was utilized efficiently for the production. The final performance was the culmination of long preparation process for 11 months in 2015. In spite of some limits, this project has a historical meaning in the point that it was the first trial of same kind in the world.

• Informatization Policy
• /
• v.30 no.4
• /
• pp.40-61
• /
• 2023

The adoption of smart factories and smart manufacturing as strategies to enhance competitiveness and stimulate growth in the manufacturing sector is vital for a country's future competitiveness and industrial transformation. The government has consistently pursued smart manufacturing innovation policies starting with the Manufacturing Innovation 3.0 strategy in the Ministry of Industry. This study aims to identify policy areas for smart factories and smart manufacturing based on technical standards. Analyzing policy areas at the current stage where the establishment and support of domestic standards aligning with international technical standards are required is crucial. By prioritizing smart manufacturing process areas within the industry, policymakers can make well-informed decisions to advance smart manufacturing without blindly following international standardization in already well-established areas. To achieve this, the study utilizes a hierarchical analysis method including expert interviews and importance-performance analysis for the five major process areas. The findings underscore the importance of proactive participation in standardization for emerging technologies, such as data and security, instead of solely focusing on areas with extensive international standardization. Additionally, policymakers need to consider carbon emissions, energy costs, and global environmental challenges to address international trends in export and digital trade effectively.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.344-357
• /
• 2020

Strain improvement and bioprocess development were undertaken to enhance hyaluronic acid(HA) production by Streptococcus zooepidemicus cells. Using a high-yielding mutant strain, statistical medium optimization was carried out in shake flask cultures, resulting in 52% increase in HA production (5.38 g/l) at the optimal medium composition relative to the parallel control cultures. For sufficient supply of dissolved oxygen (DO), which turned out to be crucial for enhanced production of HA, agitation system and speed were intensively investigated in 5 L bioreactor cultures. Increase in oxygen mass transfer coefficient (k_La) through increment of agitation speed (rpm) and 35% expansion of diameter of the newly-designed impellers showed significantly positive effects on HA production. By installing an expanded Rushton-turbine impeller for efficient break-down of sparged air, and an extended marine impeller above the Rushton-turbine impeller for efficient mixing of the air-born viscous fermentation broth, maximum amount of HA (9.79 g/l) was obtained at 450 rpm, 1.8 times higher level than that of the corresponding flask culture. Subsequently, the possibility of bioprocess scale-up to a 50 L bioreactor was investigated. Despite almost identical maximum HA production (9.11 vs 9.25 g/l), the average HA volumetric productivity (r_p) of the 50 L culture turned out only 74% compared to the corresponding 5 L culture during the exponential phase, possibly caused by shear damages imposed on the producing cells at the high stirring in the 50 L culture. The scale-up process could be successfully achieved if a scale-up criterion of constant oxygen mass transfer coefficient (k_La) is applied to the 50 L pilot-scale bioreactor system.

• The Journal of Fisheries Business Administration
• /
• v.41 no.1
• /
• pp.53-72
• /
• 2010

The objects of this study are to consider the current features and the development process of the utilizing system of aquaculture farms in Japan, and to suggest the theoretical basis for improvement of aquaculture system of Korea in the future through the analysis of background of the liberalization theory proposed recently. The aquaculture-fishery system of Japan was begun from the Meiji Era Fishery Act and New Fishery Act of the World war II. A small sum of fishery fee is paid to the fishery cooperative having fishing rights for securing fishing area newly, because the aquaculture of Japan belong to fishery cooperative not individual ownership of union membr of cooperative society, the other words, cultivation fisheries household. In case of Korea, there are several differences with Japan as follows; almost cultivation fisheries household has a individual license, the lisence of fishing rights are recognized as an article, the license of fishing lights are able to do sale. Therefore, it is needed to paid a lots of money for securing fishing area newly. On the other hand, advanced countries in the marine aquaculture such as Norway have reached the stage where the managing abilities of marine aquaculture are similar to those in the manufacturing industry. And the number of large scale aquaculture farms with developed technologies and advanced marketing strategies in those countries is increasing. Considering that the marine aquaculture in Japan under the similar fishery systems of Korea has developed the state-of-the-art management skills or lead to large scale management, it is difficult to expect the decrease in the production costs under the small scale family business in Korea and this will lead to the decreasing competitive advantage over the imported seafood. Therefore marine aquaculture in Korea needs to increase the economy of scale to acquire the competitive advantage.