• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제3권2호
• /
• pp.465-470
• /
• 1999

This paper presents a design method of driving system for EV(Electric Vehicle). EV driving system consist of batteries, battery interface system and inverter. The power control circuit of the driving system is simple, since only one PWM(Pulse Width Modulation) inverter is used. These test spectrums and waveforms can be used to determine the filter component ratings as well as to compute the harmonics injected into the source. The hybrid control strategy which can reduced harmonic components. The analysis results indicate that the required capacity of the condenser can be reduced with LC filter. In this paper, the design and implementation of the proposed systems are described and some experimental results are given to show the performance of this driving system. The control strategy of the system to available inverter's power and motor's power and torque is discussed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.305-312
• /
• 2003

Recently, with a progressive development of hardware of computer, the internet and network technology, the environment of construction varies rapidly due to increase the complex form in structure shape and system. With variations, the CAD system for design and products also varies from 2D system to 3D system. This study mainly deals with the methodology of automatic connection design of 3D CAD system, steel connection system (XSteel) using macro. First, using design program in the steel connection system, Xsteel, the joint connection macro will be made up and established the detail classes of design. The next, Database Program (Converter Program) related to the general structural analysis program (MIDAS) and the steel connection program (Xsteel) is constructed for data interface between two programs. From this study, if the merits of 3D CAD system and converter program are utilized well, it is expected that the time needed in modeling and the amounts due to material loses decrease gradually.

• Journal of the Korean Society for Precision Engineering
• /
• 제15권8호
• /
• pp.156-164
• /
• 1998

IMS is a more advanced manufacturing system than FMS. However, IMS do not have sufficient performance for the work in the various and uncertain environment, because of the difficulty of the work and occurrence of the unexpected condition. If IMS is hard to work properly, teleoperation system can support it by using the human's consideration and judgment. The master mechanism is a basic component of the teleoperation system and the development of the useful one is important for efficiency of the work. A master mechanism of exoskeleton type can increase the work efficiency, mobility and harmony between a working robot and an operator. This paper describes an arm-harness of exoskeleton type, which is able to drive a robot according to judgment. This device is applied to a robot system for evaluating the system performance through the experiment.

• Journal of Biomedical Engineering Research
• /
• 제17권1호
• /
• pp.33-42
• /
• 1996

A multimedia remote ultrasound image transfer system for tole-medical services was implemented. The image data of the ultrasound scanner system of the slave is compressed using image compression system. It is transferred to the master PC via ISDN UNI(User-Network Interface) and decompressd by image decompression system. The total system is composed of three parts; first, the image capture card which transfers bidirection- al data between ultrasound scanner system and PC, second, image compression and decompression card, finally, ISDN TA(Terminal Adaptor) card for transferring the image. This system has a easy user interface because it is executed on the basis of MS-WINDOWS. So it is capable of serving medical services at a remote place.

• Journal of the Korean Society for Precision Engineering
• /
• 제8권1호
• /
• pp.105-115
• /
• 1991

This paper describes an integrated CAD and CAPP system for prismatic parts of injection mold which generates a complete process plan automatically from CAD data of a part without human intervention. This system employs Auto CAD as a CAD model and GS-CAPP as an automatic process planning system for injection mold. The proposed CAD/CAPP system consists of three modules such as CAD data conversion module, manufacturing feature recognition module, and CAD/CAPP interface module. CAD data conversion module transforms design data of AutoCAD into three dimensional part data. Manufacturing feature recognition module extracts specific manufacturing features of a part using feature recognition rule base. Each feature can be recognized by combining geometry, position and size of the feature. CAD/CAPP interface module links manufacturing feature codes and other head data to automatic process planning system. The CAD/CAPP system can improve the efficiency of process planning activities and reduce the time required for process planning. This system can provide a basis for the development of part feature based design by analyzing manufacturing features.

• Journal of Internet Computing and Services
• /
• 제8권5호
• /
• pp.11-20
• /
• 2007

This paper designs and implements a message passing library called JMPI (Java Message Passing Interface) which complies with MPJ (Message Passing in Java), the MPI standard Specification for Java language, This library provides some graphic user interface tools to enable parallel computing environments to be configured very simply by their administrators and JMPI applications to be executed very conveniently. Also in this paper, we implement two versions of systems using Socket and RPC which are both typical distributed system communication mechanisms and with three benchmark applications, compare performance of these systems with that of an existing system JPVM depending on the increasing number of the computers. Experimental results show that our systems outperform JPVM system in terms of various aspects and that the most efficient processing speedup can be obtained by increasing the number of the computers in consideration of network traffic through processing evaluation. Finally, we can see that, as the number of computers increases, using RMI to transmit a message is more effective than using object streams attached to sockets to transmit a message.

• Journal of Microbiology and Biotechnology
• /
• 제26권2호
• /
• pp.394-401
• /
• 2016

Recently, the clustered regularly interspaced short palindromic repeats (CRISPR)-associated protein 9 (CRISPR/Cas9) system, a genome editing technology, was shown to be versatile in treating several antibiotic-resistant bacteria. In the present study, we applied the CRISPR/Cas9 technology to kill extended-spectrum beta-lactamase (ESBL)-producing Escherichia coli. ESBL bacteria are mostly multidrug resistant (MDR), and have plasmid-mediated antibiotic resistance genes that can be easily transferred to other members of the bacterial community by horizontal gene transfer. To restore sensitivity to antibiotics in these bacteria, we searched for a CRISPR/Cas9 target sequence that was conserved among >1,000 ESBL mutants. There was only one target sequence for each TEM- and SHV-type ESBL, with each of these sequences found in ~200 ESBL strains of each type. Furthermore, we showed that these target sequences can be exploited to re-sensitize MDR cells in which resistance is mediated by genes that are not the target of the CRISPR/Cas9 system, but by genes that are present on the same plasmid as target genes. We believe our Re-Sensitization to Antibiotics from Resistance (ReSAFR) technology, which enhances the practical value of the CRISPR/Cas9 system, will be an effective method of treatment against plasmid-carrying MDR bacteria.

• The Transactions of the Korea Information Processing Society
• /
• 제7권1호
• /
• pp.156-165
• /
• 2000

This paper proposes an integrated system for interworking different network management protocols. The interworking system between SNMP(Simple Network Management Protocol) and CMIP(Common Management Information Protocol) has been designed. We defined new managed object architecture using MOVI(Managed Object View Interface) concept and implemented an extended GDMO(EGDMO) compiler. An access mechanism for consistency control and atomic action on the sharing resources has been defined. Thus, even if a new management protocol would be introduced, new gateway system need not to be redesigned. It can be achieved with minimum modification of the view interface of managed objects. As a managed object can support various view interfaces, several network management protocols can directly access it. This approach, therefore, provides some benefits. For instance, manager can access managed objects without additional functions and tools. Ti, also, could be achieved interworking between SNMP and CMIP with minimum modification on the view interface of the managed objects defined previously. It is able to interwork more complicated network management protocols and to increase usefulness of SNMP and CMIP.

• IE interfaces
• /
• 제24권1호
• /
• pp.1-7
• /
• 2011

The purpose of this research was to develop an integrated interface for the usability test of systems or products in the design process. It is capable of automatically creating GOMS models which can predict human task performances. It can generate GOMS models to be interacted with the prototype interfaces. It can also effectively manage various design information and various usability test results to be implemented into the new product and/or system design. Thus we can perform usability test for products or system prototypes more effectively and also reduce time and effort required for this test. For usability tests, we established an integrated interface based on GOMS model by the LabVIEW program. We constructed the system that the linkage to GOMS model is available. Using this integrated interface, the menu structure of mobile phone can be constructed easily. User can design a depth and a breath that he want. The size of button and the label of the button is changable. The path to the goal can be defined by the user. Using a designed menu structure, the experiment could be performed. The results of GOMS model and the actual time are presented. Besides, values of operators of GOMS model can be defined as the value that user wants. Using the integrated interface that we developed, the optimal menu structure deducted. The menu structure that user wants can be established easily. The optimal layout and button size can be decided by comparison of numerous menu structures. User can choose the method of usability test among GOMS model and empirical data. Using this integrated interface, the time and costs can be saved and the optimal menu structure can be found easily.

• Journal of the HCI Society of Korea
• /
• 제2권2호
• /
• pp.53-59
• /
• 2007

Several researches in 3D interaction have identified and extensively studied the four basic interaction tasks for 3D/VE applications, namely, navigation, selection, manipulation and system control. These interaction schemes in the real world or VE are generally suitable for interacting with small graspable objects. In some applications, it is important to duplicate real world behavior. For example, a training system for a manual assembly task and usability verification system benefits from a realistic system for object grasping and manipulation. However, it is not appropriate to instantly apply these interaction technologies to such applications, because the quality of simulated grasping and manipulation has been limited. Therefore, we introduce the intuitive and natural 3D interaction haptic interface supporting high-precision hand operations and realistic haptic feedback.