• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
• /
• pp.575-579
• /
• 2006

지능형 교수 시스템의 주요 구성 요소인 교수 모듈, 학습자 모듈, 전문가 모듈, 인터페이스 모듈 중에서 학습자와 가장 긴밀한 연관이 있으며 학습 시스템의 가장 큰 표현 부분에 해당하는 모듈이 인터페이스 모듈이다. 학습자에게 있어 인터페이스 모듈은 일반 이러닝 시스템뿐만 아니라 지능형 교수 시스템에서도 큰 비중을 차지하는데 아직까지 인터페이스의 개선에 관한 연구는 그리 활발하지 못한 실정이다. 이에 따라 본 연구에서는 이러닝시 학습자와 가장 상호작용이 많은 인터페이스의 개선에 관한 연구를 수행하였다. 본 연구를 위해 기존의 인터페이스의 주요 구성 요소에 대해 살펴보았으며 선행 연구의 문제점을 개선한 멀티미디어 인터페이스를 설계 구현 하였다.

• 디지털산업정보학회논문지
• /
• 제15권4호
• /
• pp.31-40
• /
• 2019

This paper proposes an adaptive PCIe system for TI C66x DSPs. Conventionally, the PCIe system provided by the C66x is a system dependent on the structure in which the primary core writes an application to the DSP memory through the PCIe interface, then activate the secondary core. Due to the dependency between the cores, when developing a project using a PCIe interface, the remaining cores have to be programmed with a concern of the primary core used as the PCIe interface. Therefore, in order to de-couple the connections among the cores, an adaptive PCIe system is proposed, in the paper, in which the cores operate independently compared to the conventional system. Since the core used as the PCIe interface only runs PCIe related operations in the new system, the remaining cores can be fully utilized without concerning the connections with the core for PCIe interface. In order to verify the feasibility of the proposed adaptive PCIe system, the implementations of LTE-A down link, and IEEE 802.11ac are carried out using the evaluation board which includes a TMS320C6670 chip. Altogether, these results support that we demonstrated that the digital signal processing systems with the PCIe Interface can be developed more rapidly by applying the proposed system.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.641-642
• /
• 2004

• 한국정보통신학회논문지
• /
• 제25권2호
• /
• pp.259-266
• /
• 2021

USB 버스는 편리하게 사용할 수 있고 빠르게 데이터를 전송하는 장점이 있어서, FPGA 개발보드와 PC 사이의 표준적인 인터페이스이다. 본 논문에서는 Cypress FX3 USB 3 브릿지 칩에 대한 slave FIFO 인터페이스를 사용하여 FPGA 검증 시스템을 구현하였다. slave FIFO 인터페이스 모듈은 FIFO 구조의 호스트 인터페이스 모듈과 마스터 버스 제어기와 명령 해독기로 구성되며, FX3 브릿지 칩에 대한 스트리밍 데이터 통신과 사용자 설계 회로에 대한 메모리 맵 형태의 입출력 인터페이스를 지원한다. 설계 검증 시스템에는 Cypress FX3 칩과 Xilinx Artix FPGA (XC7A35T-1C5G3241) 칩으로 구성된 ZestSC3 보드가 사용되었다. C++ DLL 라이브러리와 비주얼 C# 언어를 사용하여 개발한 GUI 소프트웨어를 사용하여, 사용자 설계 회로에 대한 FPGA 검증 시스템이 다양한 클록 주파수 환경에서 올바로 동작함을 확인하였다. 설계한 FPGA 검증 시스템의 slave FIFO 인터페이스 회로는 모듈화 구조를 갖고 있어서 메모리맵 인터페이스를 갖는 다른 사용자 설계 회로에도 응용이 가능하다.

• 한국정보통신학회논문지
• /
• 제16권12호
• /
• pp.2595-2600
• /
• 2012

본 연구에서는 전자기기의 사용이 불편한 장애인이나 노인들을 위한 새로운 인터페이스를 제안한다. 제안한 방식은 대부분의 전자기기에 적용되고 있는 물리적 스위치 방식의 인터페이스를 마이크와 3축 가속도 센서가 달린 헤드셋을 이용하여 음성인식과 모션인식을 통해 전자기기를 사용하는 방식이다. 음성인식은 마이크를 통해 명령이 전달되고 음성인식 모듈을 통해 PC의 마우스를 컨트롤한다. 그리고 모션인식은 머리를 움직여 헤드셋에 있는 3축 가속도 센서가 마우스 포인터를 제어하여 명령을 수행하게 된다. 제안한 인터페이스 방식의 유용성을 확인하기 위해 헤드셋을 제작하고, 제작된 헤드셋을 이용하여 실험실과 식당, 도서관 등에서 실험을 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1408-1415
• /
• 2007

To operate Platform Screen Door (PSD) automatically, the operational data of PSD and the train must be interfaced properly. PSD and train are operated together by the signaling system in Automatic Train Operation (ATO) signaling system zone where interfaces are provided between PSD and train. However, the additional PSD interface system with train is required in train operating zone without the interface between PSD and train. For the PSD interface, the wireless communication system or the train status (train correct stop status / train door status) detection system has been used. Seoul Metro line No.2. has the PSD wireless communication system using 447MHz band RF. For the safety of PSD operation, it is required to prevent RF interference in the subway environment where many frequencies exist. In this paper, the PSD wireless communication system is developed using 2.4GHz band RF to prevent the interference of the wireless communication and increase the traffic of the PSD interface. Furthermore, the improved system can store, manage and display the PSD and train operational data using Human Machine Interface (HMI) in the train's driver cab.

• ETRI Journal
• /
• 제37권4호
• /
• pp.793-803
• /
• 2015

We propose a novel HMI UI/UX for an in-vehicle infotainment system. Our proposed HMI UI comprises multimodal interfaces that allow a driver to safely and intuitively manipulate an infotainment system while driving. Our analysis of a touchscreen interface-based HMI UI/UX reveals that a driver's use of such an interface while driving can cause the driver to be seriously distracted. Our proposed HMI UI/UX is a novel manipulation mechanism for a vehicle infotainment service. It consists of several interfaces that incorporate a variety of modalities, such as speech recognition, a manipulating device, and hand gesture recognition. In addition, we provide an HMI UI framework designed to be manipulated using a simple method based on four directions and one selection motion. Extensive quantitative and qualitative in-vehicle experiments demonstrate that the proposed HMI UI/UX is an efficient mechanism through which to manipulate an infotainment system while driving.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.773-776
• /
• 1999

For providing good quality power steadily, it is required that operators manipulate the control system of power plant with the good knowledge of power plant system and the control strategies, and cope with accidents effectively. With those requirements, it is general to train operators in power plant control room using full-scope simulator. A full scope simulator adopts the I&C instruments in the main cotrol room, so has to include I/O interface system to interface the simulation computer with I&C instruments in main control room. In already developed simulators, most of I/O interface systems are closed. vendor-dependent. proprietary systems. so have the many disadvantages in terms of cost and maintenance. In this paper. we suggest the method to configure I/O interface system for Thermal Power Plant Simulator based on standard technology which gives the advantages of ease-of-use. cost effectiveness, and simplicity of maintenanceuse by using off-the-shelf products for system integration.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.193-200
• /
• 2012

Previous publications regarding the design and specifications of the interface inductor and the DC side capacitor for a STATCOM usually deal with the interface inductor and the DC side capacitor only. They seldom pay attention to the influences of the interface inductor and capacitor on the performance of a STATCOM system. In this paper a detailed analysis of influence of the interface inductor and the DC side capacitor on a STATCOM system and the corresponding design considerations is presented. Phase and amplitude control is considered as the control strategy for the STATCOM. First, a model of a STATCOM system is carried out. Second, through frequency domain methods, such as transfer functions and Bode plots, the influence of the interface inductor and the DC side capacitor on the stability and filtering characteristics of the STATCOM are extensively investigated. Third, according to this analysis, the design considerations based on the phase margin for the interface inductor and the DC side capacitor are discussed, which leads to parameters that are different from those of the traditional design.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2006년도 추계학술대회 발표논문집
• /
• pp.109-112
• /
• 2006

This paper presents a dialogue interface using the dialogue management system as a method for controlling home appliances in Home Network Services. In order to realize this type of dialogue interface, we first investigated the user requirements for Home Network Services by analyzing the dialogues entered by users. Based on the analysis, we were able to extract 15 user intentions and 22 semantic components. In our study, example dialogues were collected from WOZ (Wizard-of-OZ) environment to implement a reasoning model for generating meaningful responses for example-based dialogue modeling technique. An overview of the Home Network Control System using proposed dialogue interface will be presented. Lastly, we will show that the Dialogue Management System trained with our collected dialogues behaves properly to achieve its task of controlling Home Network appliances by going through the steps of natural language understanding, response reasoning, response generation.