• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1310-1320
• /
• 2007

This study investigated the differences in the importance of store characteristics depending on on-line clothing store type and consumer age. The questionnaires were given to female residents in the ages between 20-39 in Seoul and Kyung-gi province during October 2006. The results were summarized as follows: 1. By analyzing the differences in importances of on-line store characteristics factors it was found that buying process service factor and product searching system factor were important in on-line general merchandise store. and buying process service factor and product factor(all the factors, such as store credit, product, screen-displayed design, searching and approaching system, customer management service) were important in on-line specialty store. 2. By analyzing the differences in importances of on-line store characteristics depending on the store type, buying process system such as refund policy, shipping, high-speed payment and rapid searching, screen-displayed design system, approaching and searching system were more important in on-line general merchandise store when comparing to specialty store. It also showed that the consumer considered the reputation of the store and its image more important in on-line general merchandise store. 3. By analyzing the differences in of on-line clothing store importance depending on age, in the case of on-line general merchandise store, it showed that people in their thirties regarded buying process service factor more important than twenties, and when it came to the product and searching system, it was vice versa. Twenties had a tendency to consider the aspect of product important and, relatively, thirties regarded searching and approaching system factor important. in the case of specialty store. It was found that women in their twenties had a tendency to consider product factor more important.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.3
• /
• pp.45-53
• /
• 2003

This paper presents a study on the power factor improvement of V47- 660 [kW] Wind Turbine Generation System (WTGS) in Jeju wind farm, as a model system in this paper. In this system, the power factor correction is controlled by the conventional method with power condensor banks. Also, this system has only four bank steps, and each one capacitor bank step is cut in every one second when the generator has been cut in. This means that it is difficult to compensate the reactive power exactly according to the variation of them. Actually, model system has very low power factor in the area of low wind speed, which is almost from 4 to 6 [m/s]. This is caused by the power factor correction using power condenser bank. To improve the power factor in the area of low wind speed, we used the static var compensator(SVC) using current controlled PWM power converter using IGBT switching device. Finally, to verify the proposed method, the results of computer simulation using Psim program are presented to support the discussions.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.196-198
• /
• 2003

The low load power factor causes various problems such as the increase of the power loss and the voltage instability. The demand of reactive power increases continuously with the growth of active power and the restructuring of electric power companies makes the integrated management of ractive power troublesome, from which the systematic control of load power factor is required. In this paper, the load power factor sensitivity of the generation cost is derived and its effects in supplying the reactive power and enhancing the load power factor are analyzed in a small-scale power system. The load power factor sensitivity of the generation cost is applied for determining the locations and capacities of reactive power compensation devices. It is shown that the generation cost can be reduced and the system power factor can be enhanced effectively using the load power factor sensitivity.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.153-155
• /
• 2004

Various problems such as the increase of the power loss and the voltage instability may often occur in the case of low load power factor. The demand of reactive power increases continuously with the growth of active power and the restructuring of electric power companies makes the integrated management of ractive power a troublesome problem, so that the systematic control of load power factor is required. In this paper, the load power factor sensitivity of the generation cost is used for determining the locations of reactive power compensation devices effectively and for enhancing the load power factor appropriately. In addition, the integrated costs are used for determining the value of the load power factor from the point of view of the economic operation. It is shown through the application to a large-scale power system that the system power factor can be enhanced effectively and appropriately using the load power factor sensitivity and integrated costs.

• The Journal of the Korea Contents Association
• /
• v.9 no.3
• /
• pp.28-38
• /
• 2009

Login process uses both ID and password information to authenticate someone and to permit its access privilege on system. However, an attacker can get those ID and password information by using existing packet sniffing or key logger programs. It cause privacy problem as those information can be used as a hacking and network attack on web server and web e-mail system. Therefore, a more secure and advanced authentication mechanism should be required to enhance the authentication process on existing system. In this paper, we propose a multi-factor authentication process by using software form of secure card system combined with existing ID/Password based login system. Proposed mechanism uses a random number generated from the his/her own handset with biometric information. Therefore, we can provide a one-time password function on web login system to authenticate the user using multi-factor form. Proposed scheme provide enhanced authentication function and security because it is a 'multi-factor authentication mechanism' combined with handset and biometric information on web login system.

• Journal of Power System Engineering
• /
• v.17 no.1
• /
• pp.64-70
• /
• 2013

The heat transfer and friction factor characteristics of turbulent flows in three stationary channels have been investigated experimentally to check out the effect of divergence ratio. These are a constant cross-sectional channel and two diverging channels with ratio of divergence(Dho/Dhi) of 1.16 and 1.49. The measurement was conducted within the range of Reynolds numbers from 15,000 to 89,000 and the dimension of uniform cross-sectional test section is $100mm{\times}100mm$ at the cross section and 1,000 mm in length. The measurements of heat transfer coefficients and friction factors in the uniform channels were conducted as a reference. Because of the streamwise flow deceleration, the heat transfer and friction factor characteristics in the diverging channel were quite different from those of the constant cross-sectional channel. The effective friction factors and convective heat transfer coefficients increased with increasing the ratio of divergence of the channel.

• International Journal of Contents
• /
• v.9 no.2
• /
• pp.14-21
• /
• 2013

Current smartphone authentication systems are deemed inconvenient and difficult for users on remembering their password as well as privacy issues on stolen or forged biometrics. New authentication system is demanded to be implicit to users with very minimum user involvement being. This idea aims towards a future model of authentication system for smartphones users without users realizing them being authenticated. We use the most frequent activity that users carry out with their smartphone, which is the calling activity. We derive two basics related interactions that are first factor being arm's flex (AF) action to pick a phone to be near ones' ears and then once getting near ear using second factor from ear shape image. Here, we combine behavior biometrics from AF in first factor and physical biometrics from ear image in second factor. Our study shows our dual-factor authentication system does not require explicit user interaction thereby improving convenience and alleviating burden from users from persistent necessity to remember password. These findings will augment development of novel implicit authentication system being transparent, easier, and unobtrusive for users.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.463-469
• /
• 1998

Factor analysis was applied as a multivariate statistical technique to official genetic evaluations of type classification traits for 1,265,785 Holstein cows and 10,321 sires computed from data collected between August 1982 and June 1994 in Canada. Type traits included eighteen linear descriptive traits and eight major score card traits. Principal components of the factor analysis showed that only five factors explain the information of the genetic value of linear descriptive traits for both cows and sires. Factor 1 included traits related to mammary system, like texture, median suspensory, fore attachment, fore teat placement and rear attachment height and width. Factor 2 described stature, size, chest width and pin width. These two factors had a similar pattern for both cows and sires. In constrast, Factor 3 for cows involved only bone-quality, while in addition for sires, Factor 3 included foot angle, rear legs desirability and legs set. Factor 4 for cows related to foot angle, set of rear leg and leg desirability, while Factor 4 related to loin strenth and pin setting for sires. Finally, Factor 5 included loin strength and pin setting for cows and described only pin setting for sires. Two factors only were required to describe score card traits of cows and sires. Factor 1 related to final score, feet and legs, udder traits, mammary system and dairy character, while frame/capacity and rump were described by Factor 2. Communality estimates which determine the proportion of variance of a type trait that is shared with other type traits via the common factor variant were high, the highest ${\geq}$ 80% for final score, stature, size and chest width. Pin width and pin desirability had the lowest communality, 56% and 37%. Results indicated shifts in emphasis over the twelve-year period away from udder traits and dairy character, and towards size, scale and width traits. A new system that computes fmal score from type components has been initiated.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.64-70
• /
• 2010

This paper presents how to decide on tuning factor(${\delta}$) and quality factor(Q) values in design of single-tuned passive harmonic filters. Tuning factor(${\delta}$) and quality factor(Q) values have to consider before decision on circuit parameters of passive filters. A Study on these two value has not been scarcely performed and only experienced values has been used in passive harmonic filter design by far. As a experienced value, in cases of 5th and 7th filter, tuning factor(${\delta}$) is about 0.94 and 0.96 respectively and quality factor(Q) is, in all cases of, 50. If Single-tuned passive harmonic filter will be off-tuned, performance of filter will be decreased steeply and occur to parallel resonance between system reactance and filter capacitance. Therefore During the operation, In order not to off-tuning, Filter must be tuned at former order than actual tuning order. This is the same that total impedance of filter must have a reactive impedance. In this paper, Tuning factor(${\delta}$) is decided via example of real system and using the bode-plot and then performance of filters confirmed by filter current absorbtion rate. And Quality factor(Q) decided using the bode plot in example system and then performance of filters confirmed by filter current absorbtion rate also, which makes a calculated filter parameters to satisfy IEEE-519 distortion limits. Finally, Performance of the designed passive harmonic filter using the tuning factor(${\delta}$) and quality factor(Q) values, decided in this paper is verified by experiment and shows that 5th, 7th, 9th, 11th and 13th current harmonic distortions are decreased within IEEE-519 distortion limits, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2109-2118
• /
• 2011

The power system has to maintain its synchronism from transient disturbances and oscillations. To achieve this, the static var compensator(SVC), which is a flexible AC transmission system(FACTS), is applied to the power system. SVC using an advanced control algorithm improves the stability of power system. This paper is a study on design of SVC to improve harmonics and power factor of power plant. The proposed SVC analyzes harmonics, voltage drop and reactive power in real time. On the basis of the analysis of the data, the SVC using a switching control algorithm decreases harmonic signals and increases the power factor. The experimental results show that the proposed SVC enhances the stability of power system.