• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2006년도 추계학술발표대회
• /
• pp.535-538
• /
• 2006

FMEA(Failure Mode & Effect Analysis)는 발생 가능한 잠재 고장의 형태와 그 영향을 평가하고 고장을 예방할 수 있도록 표를 이용하여 체계적으로 접근하는 방법이다. FMEA를 활용하여 전자 의료기기의 신뢰성을 평가할 수 있는 방안에 대한 연구를 통해 의료기기의 신뢰성 향상을 위한 체계적인 접근이 요구된다. 본 연구에서는 소프트웨어의 신뢰성을 평가하기 위한 체계를 구축하기 위해 FMEA 기법을 근간으로 하여 전자 의료기기의 신뢰성 평가 체계 구축에 적용할 수 있는 방안을 수립하고자 한다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.502-506
• /
• 2006

건설재해는 반복재해가 빈번하게 일어나고 재해 발생 시 대부분이 중대재해이므로 안전관리에 더욱더 철저해야만 한다. 하지만 우리나라 건설 산업에서 안전관리 시스템은 관리기법이나 사고예방을 위한 구체적이고 기술적인 수단은 빈곤하며 단순하고 과학적이지 못하다. 이러한 건설 산업에서 안전관리 부분에서 FMEA를 이용하여 안전관리 중점대상 선정 및 중요도의 수치화를 통하여 안전관리 대상에 대한 관리 체계를 확립하기 위한 과학적이고 체계적인 방안에 대하여 연구하였으며 산업안전관리공단의 중대재해 사례를 통하여 실제 사례를 보여주었다.

• International Journal of Quality Innovation
• /
• 제8권1호
• /
• pp.137-153
• /
• 2007

Failure mode and effects analysis (FMEA) is a preventive technique in reliability management field. The successful implementation of FMEA technique can avoid or reduce the probability of system failure and achieve good product quality. The FMEA technique had applied in vest scopes which include aerospace, automatic, electronic, mechanic and service industry. The marking process is one of the back ends testing process that is the final process in semiconductor process. The marking process failure can cause bad final product quality and return although is not a primary process. So, how to improve the quality of marking process is one of important production job for semiconductor testing factory. This research firstly implements FMEA technique in laser marking process improvement on semiconductor testing factory and finds out which subsystem has priority failure risk. Secondly, a CCD position solution for priority failure risk subsystem is provided and evaluated. According analysis result, FMEA and CCD position implementation solution for laser marking process improvement can increase yield rate and reduce production cost. Implementation method of this research can provide semiconductor testing factory for reference in laser marking process improvement.

• 대한기계학회논문집A
• /
• 제39권6호
• /
• pp.631-638
• /
• 2015

본 연구에서는 고체 로켓 추진 기관의 신뢰성 분석을 위해 준-정량적 FMECA를 수행하였다. 준-정량적 FMECA는 고장모드 및 영향 분석(FMEA)과 치명도 분석(CA)를 포함하는 분석 기법으로서, FMECA 수행을 위해서 FMEA는 고체 로켓 추진 기관을 43개의 부품으로 나누어 각 부품에 대하여 도출된 총 137개의 고장모드에 대해 수행하였다. 또한 일부 고장모드의 고장률 데이터를 이용하여 치명도 분석을 수행하였다. 준-정량적 FMECA 수행을 통하여 고체 로켓 추진 기관의 각 부품에서 발생 할 수 있는 잠재적 고장모드와 고장원인 및 영향을 분석, 정리할 수 있었으며, 우선적인 개선 조치가 필요한 중요 고장모드를 확인할 수 있었다.

• 한국가스학회지
• /
• 제7권4호
• /
• pp.30-35
• /
• 2003

제조물책임(Product Liability : PL)이란 제조물의 결함으로 인하여 소비자 또는 제3자의 생명, 신체, 재산 등에 손해가 발생했을 경우 그 제조물의 제조자 또는 판매자 등에게 손해배상 책임을 부과시키는 법으로 국내에서는 제조물책임법은 2002년 7월 시행되었다. 본 연구에서 FMEA를 이용한 화학제품의 제조물책임 대응체계를 구성하였으며, 깍N-Dimethyethylamine을 사례로 적용하여 연구를 진행하였다. 우선 화학제품의 취급설명서 역할을 하는 MSDS(Material Safety Data Sheet)를 통해 제품의 정보를 파악하고, 제품의 결함으로 인한 영향을 분석하는 FMEA기법을 적용하여 결함의 심각도, 결함의 발생빈도 및 검출도의 곱으로 정의된 RPN(Risk Priority Number)에 의하여 위험성을 정량적으로 제시하였다.

• International Journal of Safety
• /
• 제9권2호
• /
• pp.22-28
• /
• 2010

This paper describes a web-based design review system as a knowledge management system relating reliability and safety system design. Since people's consciousness for safety and security become sensitive and increases the need of establishing a proactive prevention method for internal failures and relating risks in products. It also means that prevailing tacit knowledge in retired workers, in order to transform them to be easily used to support new system development, become more important. When considering safety and reliability design, at least two data sheet are necessary; Failure Modes and Effects Analyses (FMEA) and Risk Assessment (RA). These two data are practically made separately. However, it includes the concerns that a risk by failures during long-term use may not be noticed. To overcome this insufficiency, a support tool for integrating reliability evaluation and risk assessment data simultaneously is expected to be revealed. The authors have then developed a web-based design review system for reliability and safety system design. The system include various profitable functions; making FMEA and RA sheet, retrieving past data sheet for engineering change management and new product development and web-based discussion to increase the efficiency of discussion. The system is applied to one practical development works in order to demonstrate its effectiveness that is to be made clear by interviewing user's qualitative comment.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.108-113
• /
• 2015

Plastic injection moulding machine is widely used for many industrial field. It is classified into mandatory safety certification machinery in Industrial Safety and Health Act because of its high hazard. In order to prevent industrial accidents by plastic injection moulding machine, it is necessary for designer to identify hazardous factors and assess the failure modes to mitigate them. This study tabulates the failure modes of main parts of plastic injection moulding machine and how their failure has affect on the machine being considered. Failure Mode & Effect Analysis(FMEA) method has been used to assess the hazard on plastic injection moulding machine. Risk and risk priority number(RPN) has been calculated in order to estimate the hazard of failures using severity, probability and detection. Accidents caused by plastic injection moulding machine is compared with the RPN which was estimated by main regions such as injection unit, clamping unit, hydraulic and system units to find out the most dangerous region. As the results, the order of RPN is injection unit, clamping unit, hydraulic unit and system units. Barrel is the most dangerous part in the plastic injection moulding machine.

• 한국안전학회지
• /
• 제35권5호
• /
• pp.115-120
• /
• 2020

From 2009 when the CNS facility was installed, the number of reactor failures due to abnormal CNS facility system has increased significantly. Of the total of 19 nuclear reactor shutdowns over the six years from 2009 to 2019, there were 10 nuclear reactor shutdowns associated with the CNS facility, which are very numerous. Therefore, this report intends to analyze the history of nuclear reactor shutdowns due to CNS facility system failure in detail, and to present the root cause and solution to problems. As a result of FMEA implementation of CNS facility system, a total of 76 SPVs were selected. In addition, 10 cases of reactor shutdown history due to CNS facility system abnormalities were analyzed in detailed, and improvement plans for solving the root cause and problem were suggested for each trip history. The results of this study are expected to be able to operate the domestic research reactor and CNS facilities more stably by providing effective measures to prevent recurrence of CNS facilities and reactor trips.

• 산업경영시스템학회지
• /
• 제40권3호
• /
• pp.27-37
• /
• 2017

As the global uncertainty of manufacturing has increased and the quality problem has become global, the recall has become a fatal risk that determines the durability of the company. In addition, as the convergence of PSS (product-service system) product becomes common due to the development of IT convergence technology, if the function of any part of hardware or software does not operate normally, there will be a problem in the entire function of PSS product. In order to manage the quality of such PSS products in a stable manner, a new approaches is needed to analyze and manage the hardware and software parts at the same time. However, the Fishbone diagram, FTA, and FMEA, which are widely used to interpret the current quality problem, are not suitable for analyzing the quality problem by considering the hardware and software at the same time. In this paper, a quality risk assessment model combining FTA and FMEA based on defect rate to be assessed daily on site to manage quality and fishbone diagram used in group activity to solve defective problem. The proposed FTA-FMEA based risk assessment model considers the system structure characteristics of the defect factors in terms of the relationship between hardware and software, and further recognizes and manages them as risk. In order to evaluate the proposed model, we applied the functions of ITS (intelligent transportation system). It is expected that the proposed model will be more effective in assessing quality risks of PSS products because it evaluates the structural characteristics of products and causes of defects considering hardware and software together.

• 대한기계학회논문집A
• /
• 제41권1호
• /
• pp.69-76
• /
• 2017

본 연구에서는 대표적 정성적 신뢰성 분석 기법인 FMEA(고장모드 및 영향 분석)와 준-정량적 분석 방법인 치명도 분석을 이용하여 소형 하이브리드 로켓 설계를 수행하였다. 설계 중인 하이브리드 로켓을 총 31개의 부품으로 나누고 각 부품에서 발생할 수 있는 총 72개의 고장모드를 고려하여 FMEA를 수행하였으며 고장모드의 원인과 영향을 분석하였다. 또한 고장모드들의 정성적인 심각도 평가를 수행하고, 고장모드의 고장률 데이터를 이용하여 치명도 분석을 추가적으로 수행하였다. 분석 결과 설계 시 중점적으로 고려해야 할 고장모드를 파악하였으며 하이브리드 로켓의 신뢰도를 높이기 위해 고장모드들의 설계 및 재질 변경 등의 개선 조치를 설계에 반영하였다.