• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1008-1011
• /
• 1996

Most control systems of power plants are using classical PID controllers for their process control. In order to get the desired control performances, the correct tuning of PID controllers is very important. Sometimes, it is necessary to retune PID controllers after the change of system operating condition and system design change, etc. Commercial auto-tuning controllers such as relay feedback controller can be used for this purpose. However, using these controllers to the safety-critical systems of nuclear power plants may be cause of unsafe operation, because they are using test signals for tuning. A new system identification auto-tuning method without using test signal has been developed in this paper. This method uses process input/output signals for system identification of unknown control process. From the model information of control process which was obtained from system identification approach, the optimal PID parameters can be calculated. The method can be used in the safety-critical systems because it is not using test signals during system modeling process.

• Architectural research
• /
• 제1권1호
• /
• pp.23-30
• /
• 1999

This research investigates a system for house design automation. The system is based on an object-oriented building data model, aiming to support the house design process conducted by non-expert users. Its object model, with simple yet powerful user interfaces, enables a CAD system to handle a complicated building system with much ease. Hence, the model dramatically simplifies the design process beyond just the automatic document generation. In this paper, we discuss the aspects of the building data model, introduce critical concepts such as grid objects and structured floor plan, and present a prototype system called GPLAN. The system is implemented in the framework of our building data model, and it provides a host of intelligent features that have been proved useful for house design automation.

• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.11-17
• /
• 2001

The design and manufacture of injection molded polymeric parts with desired properties is a costly process dominated by empiricism, including the repeated modification of actual tooling. This paper presents an expert design evaluation system which can predict the mechanical performance of a molded product and diagnose the design before the actual mold is machined. The knowledge-based system synergistically combines a rule-based expert system with CAE programs. Heuristic knowledge of injection molding is formalized as rules of an expert consultation system. The expert system interprets the analytical results of the process simulation, predicts the performance, evaluates the design and generates recommendations for optimal design alternatives.

• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.332-339
• /
• 2007

Integration of engineering information through the IT (Information Technology) is very important key during the collaboration design process. How can we realize the data efficiently in real-time at the early design stage? How can we manage to integrate the separate information made by each designer or department effectively in real time? IT global trend is the unique way of handling these complicated problems from the information inundation. This paper suggests the design process management system deduced from the analytical results considering BPM (Business Process Management) solution workflow. Workflow based design process management system can help user share and integrate the needed information at the right time through Internet. It is found that the proposed tool works well for a beam design case, and this framework can be thus further expanded for an engineering design environment smoothly.

• 디자인학연구
• /
• 제14권3호
• /
• pp.77-85
• /
• 2001

본 논문은 아이디어 전개를 종합(synthesis)에 의해 처리되는 디자인 업무의 중심부분으로, 자시 말하면, 디자인 문제에 대한 발상(abduction)과 변환(transformation)이 야기되는 부분으로 보고, 이에 대한 창조적 디자인 사고의 형식을 밝히고, 이를 토대로 디자인 발상지원 시스템의 기초를 마련하는 데 이 연구의 목표가 있다 연구방법으로 디자인 사고에 대한 고찰을 토대로 디자인 사고(design thinking)의 모형을 설정하고, 디자인 직무분석(job analysis)으로 이 연구모형을 검토하여 디자인 사고의 형식과 그 구조를 밝히는 것이다. 창조적 디자인사고의 전개는 디자인 문제해결에서 새롭고 유용한 착상을 이루어 가는 과정으로서 발산(Divergence)/변형(Transformation)/수렴(Convergence)의 과정을 가지며, 추상적 개념으로부터 시작하여 구체적인 결과에 도달한다. 디자인 프로세스에서 아이디어 스케치와 같은 디자인 전개의 직무는 D-T-C 발상이 집중되는 직무군으로 난이도가 비교적 높은 것으로 나타났다. D-T-C 발상의 추상-구체의 조합적 전개가 가능하도록 직무분석에 의해 디자인 발상지원 시스템(Computer Mediated Creative Thinking System: CMCTS)을 설계하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.632-636
• /
• 2005

Design process model represents how a design project proceeds. It encompasses the individual activities of design, their precedence relationships, and the relevant information related to each activity. In contrast to the conventional visual representation methods, ontology-based process model is machine-readable, and therefore it can be implemented in a software system without repeating the whole steps of coding, compiling and link. This paper proposes a framework for design process ontology that defines the relevant objects and attributes in the design process as well as the relationships between them. An example for injection mold design process is shown to explain the substance of the design process model.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.137-153
• /
• 2002

Viewed as a more systematic approach of creating high quality products and bringing them into market at a lower cost and in significantly less time, it attracts the attention of quality designers to quality function deployment (QFD) approach. In attempt to reduce the design cycle, the industry has responded with concurrent design effort. In a sense, concurrent engineering refers to the integration of various activities within the broad scope of the product life cycle ［17］. Over the last ten years, much has been written about QFD but little has been available in terms of the underlying guide methodology. The methodology of QFD is quite simple and many will say that they have done it in the past but just have not formalized it into the form that this discipline requires. QFD ties the product, user, value, and manufacturing viewpoints together in a continuous process of defining the product design and manufacturing requirements. The value viewpoint recognizes the cost to obtain certain functionality, and the manufacturing viewpoint addresses conformance to requirements, but in a broader sense, the variability in production. In this paper, the QFD system acquisitions are described, and two heuristic approaches solving for the complex design process, especially the size reduction of design process and precedence-constrained relationship in QFD are proposed, and the empirical example is illustrated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.168-171
• /
• 1997

With the development of computers, CAD(Computer-Aided-Design)/CAM (Computer-Aided-Manufacturing) has been increasingly applied to manufacturing processes to increase productivity, and recently studies of expert systems, a field of Al(Artificial Intelligence), are being carried out to assist process designs. In this study, an expert system for the process design of ball stud was developed. The adequacy of the developed system was examined through comparisons with actual blueprints and verification by experts. The designed process data was saved in dxf file format for transfer to AutoCAD, from which prototype process blueprints were obtained.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.74-84
• /
• 2015

The core activities of a bicycle manufacturer are design, engineering analysis, and manufacturing. Therefore, it is important to develop a configuration design system for bicycles in order to automate the design process and facilitate the use of design data in engineering analysis and manufacturing. In this paper, we present a method to develop a bicycle configuration design system based on the part-shape information model. The proposed method enables the construction of a CAD library using modeling functions with equations and parameters that are common to most 3D mechanical CAD systems. Furthermore, the part-shape information model ensures the independence between the configuration design system and the library, making it possible to extend the CAD library flexibly without changing the system architecture.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1028-1033
• /
• 2008

The mount type HVAC control system is a type of an HVAC control system which is installed between a ceiling and ceiling boards of a room to control room temperature. Although the device is quite popular, design is conducted by a conventional way where engineering intuition and experiences are utilized. It is found that the design process is fairly inefficient and time-consuming because there are a lot of feedbacks. The axiomatic approach is used to investigate the design characteristics of the mount type HAVC control system and the Independence Axiom is utilized for the investigation. The Overall hierarchy is established up to the level of parts. It is found that the current design has many coupled and redundant aspects. The hierarchy is reorganized based on the Independence Axiom and a new design process is found. To exploit the new design process in practice, a design manual is made.