• Journal of Bio-Environment Control
• /
• v.2 no.2
• /
• pp.126-135
• /
• 1993

Recently, the characteristic of plant production systems in Korea has been changed with the strong trends of integration and large scale, using environmental control techniques. To satisfy this change successfully, first of all, the environmental prediction inside the system must be preceded. While many environmental prediction models for plant production system were developed by many persons, each model cannot be applied to the every situation without the perfect understanding of source codes and the technical modification. The purpose of this study is building the environmental prediction model to predict and evaluate the environment inside the system numerically, and also developing the multipurpose program available for practical design. The model consisted of the basic system model, the cultivation related model and the environmental control related model. The contents of each model are as follows : the basic system model is dealing with thermal and light environments, soil environment and ventilation : the cultivation related model with soil and hydroponic cultures ; and the environmental control related model with thermal curtain and heat exchanging system. The environmental prediction model was developed using a common simulation program, PCSMP, so that it could be easily understood and modified by anyone. Finally, the model was executed and verified through comparison between simulated and measured results for soil culture, and both results showed good agreements.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.894-898
• /
• 2006

A model, which can analyze the hydrological performance for small hydropower(SHP) plants having no flow duration characteristics has been studied and developed. System performance of existing SHP plant under operating was analyzed by using the developed model. The annual operational rate of SHP plant showed that the data were in good agreement with predicted results from the model. Based on these results, several SHP sites to be exploited were selected and the performance characteristics were analyzed by using the developed model. Also, primary design values such as design flow rate, plant capacity, and operational rate were suggested. As a result, it was found that the methodology used in this study is useful tool to predict the hydrological system performances of SHP sites.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.107-114
• /
• 2002

As many software tools are used for managing construction projects, integration of their data and information is gradually becoming critical. Focusing on the integration of design and scheduling data, a generic scheduling information model is designed through this research, with appropriate consideration for past research results on construction information model and also object oriented CAD technology. In order to test the practical usage of this model, a small prototype system which can derive schedule information from the design information is implemented.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.411-414
• /
• 1989

In this paper, design of the regulator and model following is studied controller on servomechanism for discrete time system. The design of the servomechanism controller is studied on the method of mode1 following controller for the output of the process to follow the output of its model. Furthermore, a common approach to eliminate disturbance and steady-state error between the outputs of the process and its model is to introduce an integrator into the control loop itself. They are eliminated when we incorporate the integrator into the closed loop system.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.1
• /
• pp.14-17
• /
• 2005

In this paper, an automated methodology for generating model parameters considering real manufacturing processes is presented with verified results. In addition, the outcomes of applications to the next generation of flash memory devices using the parameters calibrated from the process specification decision are analyzed. The test vehicle is replaced with a well-calibrated TCAD simulation. First, the calibration methodology is introduced and tested for a flash memory device. The calibration errors are less than 5% of a full chip operation, which is acceptable to designers. The results of the calibration are then used to predict the I-V curves and the model parameters of various transistors for the design of flash devices.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.742-747
• /
• 2005

A model, which can analyze the hydrological performance for small hydropower(SHP) plants having no flow duration characteristics has been studied and developed. System performance of existing SHP plant under operating was analyzed by using the developed model. The annual operational rate of SHP plant showed that the data were in good agreement with predicted results from the model. Based on these results, several SHP sites to be exploited were selected and the performance characteristics were analyzed by using the developed model. Also, primary design values such as design flow rate, plant capacity, and operational rate were suggested. As a result, it was found that the methodology used in this study is useful tool to predict the hydrological system performances of SHP sites.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.185-189
• /
• 1998

This paper addresses analysis and design of a fuzzy model-based-controller for the control of uncertain SISO nonlinear systems. In the design procedure, we represent the nonlinear system by using a Takagi-Sugeno fuzzy model and construct a global fuzzy logic controller via parallel distributed compensation and sliding mode control. Unlike other parallel distributed controllers, this globally stable fuzzy controller is designed without finding a common positive definite matrix for a set of Lyapunov equations, and has good tracking performance. The stability analysis is conducted not for the fuzzy model but for the real underlying nonlinear system. Furthermore, the proposed method can be applied to partially known uncertain nonlinear systems. A numerical simulation is performed for the control of an inverted pendulum, to show the effectiveness and feasibility of the proposed fuzzy control method.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.974-976
• /
• 1996

In this paper, a reference model following control system using a fuzzy logic controller(FLC) is proposed By using an integrator and a nonlinear hysteresis element, a reference model whose response has no overshoot and fast rise time is designed. A FLC is designed to follow as close as possible to the response of the reference model. The proposed design method is shown that the robustness and the optimal tracking property can be achieved under modeling error, disturbance and parameter perturbations. The effectiveness of the proposed design method is verified through the simulation that compare using the FLC with using a $H_{\infty}$ controller.

• Proceedings of the KAIS Fall Conference
• /
• 2003.11a
• /
• pp.65-69
• /
• 2003

As complex mathematical models are increasingly adopted for business decision-making, difficulties arise in reusing solvers (i.e., model solving algorithms) against diverse models and data sets and thus the collaboration among users (model/solver builders and decision makers) in multiple departments becomes very difficult. To facilitate the solver reuse, this paper adopts the Web services technologies as the base technologies for linking the solvers to the models, both of which are created on different modeling paradigms and different system platforms, in unified system architecture. Specifically, this paper focuses on designing an ontology that represents the interfacing semantics of the model-solver interactions in a general and standardized form. By referring to the ontology, a model management system (MMS) can autonomously suggest a set of compatible solvers and apply them to individual models even though the decision makers are not knowledgeable enough about all the details of the models and the solvers. Thus, this Web services based MMS would improve the reusability of the solvers by relieving the decision makers from the risk of erroneous application of a solver to syntactically and semantically incompatible models and the burden of considerable understanding of model and solver semantics.

• Advances in Computational Design
• /
• v.3 no.1
• /
• pp.35-47
• /
• 2018

Design of settlement space is a complicated process while reasonable spatial layout bears great significance on the development and resource allocation of a settlement. The study proposes a weighted L-system generation algorithm based on CA (Cellular Automation) model which tags the spatial attributes of cells through changes in their state during the evolution of CA and thus identifies the spatial growth mode of a settlement. The entrance area of the Caidian Botanical and Animal Garden is used a case study for the model. A design method is proposed which starts from the internal logics of spatial generation, explores possibility of spatial rules and realizes the quantitative analysis and dynamic control of the design process. Taking a top-down approach, the design method takes into account the site information, studies the spatial generation mechanism of settlements and further presents a engine for the generation of multiple layout proposals based on different rules. A optimal solution is acquired using GA (Genetic Algorithm) which generates a settlement spatial layout carrying site information and dynamically linked to the surround environment. The study aims to propose a design method to optimize the spatial layout of the complex settlement system based on parametric generation.