• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.16-21
• /
• 2005

In this paper, we analyzed performance of proposed system ad DS/CDMA GMSK system in rician fading environment. Also, we expected that proposed system with turbo code scheme is applicable system for voice, data and multimedia communication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1A
• /
• pp.34-42
• /
• 2012

Low density parity check (LDPC) code is widely used, since it shows superior performance close to Shannon limit and its decoding complexity is lower than turbo code. Recently, it is used as a channel code to decode Wyner-Ziv frames in distributed video coding (DVC) system. In this paper, we propose an efficient method to design the parity check matrix H of LDPC codes. In order to apply LDPC code to DVC system, the LDPC code should have rate compatibility. Thus, we also propose a method to merge check nodes of LDPC code to attain the rate compatibility. LDPC code is designed using ACE algorithm and check nodes are merged for a given code rate to maximize the error correction capability. The performance of the designed LDPC code is analyzed extensively by computer simulations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.121-127
• /
• 2013

When input power is small, nonideal symmetric balance incomplete block design(BIBD) code design is effective in the spectral-amplitude-code(SAC) optical code-division multiple-access (OCDMA) system. But the number of simultaneous users is not sufficient. To overcome this property, we propose 2-D BIBD codes, where nonideal BIBD codes are used as spectral code and ideal BIBD codes are used as spatial codes. Analytical results show that the number of simultaneous users increases significantly.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.803-812
• /
• 2018

The Morse code was firstly used for a wire telegraph service on May 1884 in USA. After about 10 years Korean researchers developed the Morse code in 1884 and the Morse code was firstly introduced in Korea for the wire telegraph service in September 1885. For about 130 years later, the Hangul Jamo Morse code has been used without any serious modification up to now. The Morse code is the variable length code system which each codes have a different code length. The related reference shows that English alphabet Morse code was applied in the coding theory. However, a result of analysis showed that the Hangul Jamo Morse code was not applied in the coding theory as the english alphabet code system. This paper presents the analysis result of Hangul Jamo Morse code according to the variable length coding theory. As a result of the analysis, when Hangul Jamo are coded with application of the variable length coding theory, the transmission data rate could be increased up to 25% compare to the existing code system. This paper shows a new Hangul Jamo Morse code system based on the analysis result.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.594-601
• /
• 2006

Coding of occupational and industrial codes is a major operation in census survey of Korean statistics bureau. The coding process has been done manually. Such manual work is very labor and cost intensive and it usually causes inconsistent results. This paper proposes an automatic coding system based on example-based learning. The system converts natural language input into corresponding numeric codes using code generation system trained by example-based teaming after applying manually built rules. As experimental results performed with training data consisted of 400,000 records and 260 manual rules, the proposed system showed about 76.69% and 99.68% accuracy for occupational code classification and industrial code classification, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1115-1125
• /
• 1994

In this paper, an efficient concatenated coding scheme under the satellite channel is presented. The performance of this scheme in terms of bit error rate versus energy per information bit over white gaussian noise power density E/N has been evaluated via computer simulation as a function of various system parameters. To achieve accuracy in simulation results, the distortions caused from the satellite channel, such as the nonlinearity of the TWTA(traveling wave tube amplifier), signal distortions of the input and output filters, has been considered. The simulation results show that, through using the 2/3 punctured convolutional code as the inner code of the concatenated code system, the coding rate can be improved more over 16%, while maintaining the same system complexity and bit error performance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.1
• /
• pp.15-23
• /
• 2001

In this paper, we propose a system to cancel the multi-user interference of synchronous BPSK DS/CDMA systems. In this CDMA scheme, the spectrum of the user's signal is directly spread by means of the Simplex code or the phase offsetted PN code. But in arbitrary bit interval, we use the one spreading code of the Simplex code and the phase offsetted PN code. The receiver cancel the multi-user interference and demodulate information bits by using reference correlator. This paper presents a interference cancellation model and analyzes this system mathematically. The suggested system show that the interference resulting from other users are remarkably reduced. In AWGN and Nakagami fading environment we analyze interference generated from other users and compare the resulting performance with that of the conventional receiver in same user side.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.1
• /
• pp.53-63
• /
• 1986

In this paper the decoder of nonbinary code satisfying R>1/t has been designed and constructed, where R is the code rate and t is the error correcting capability. In order to design the error trapping decoder, the concept of covering monomial is used and them the decoder system using the (15, 11) Reed-Solomon code is implemented. Without Galois Fiedl multiplication and division circuits, the decoder system is simply constructed. In the decoding process, it takes 60clocks to decode one code word. Two symbol errors and eight binary burst errors are simultaneously corrected. This coding system is shown to be efficient when the channel error probability is approximately from $5{\times}10^-4$~$5{\times}10^-5$.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4048-4056
• /
• 2023

The feasibility of using the Monte Carlo code MCS to generate multigroup cross sections for nodal diffusion simulations RAST-F of liquid metal fast reactors is investigated in this paper. The performance of the MCS/RAST-F code system is assessed using steady-state simulations of the ANTS-100e core. The results show good agreement between MCS/RAST-F and MCS reference solutions, with a keff difference of less than 77 pcm and root-mean-square differences in radial and axial power of less than 0.5% and 0.25%, respectively. Furthermore, the MCS/RAST-F reactivity feedback coefficients are within three standard deviations of the MCS coefficients. To validate the internal thermal-hydraulic (TH) feedback capability in RAST-F code, the coupled neutronic/TH1D simulation of ANTS-100e is performed using the case matrix obtained from MCS branch calculations. The results are compared to those obtained using the MARS-LBE system code and show good agreement with relative temperature differences in fuel and coolant of less than 0.8%. This study demonstrates that the MCS/RAST-F code system can produce accurate results for core steady-state neutronic calculations and for coupled neutronic/TH simulations.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.273-276
• /
• 2000

Recently, Turbo code has been considered for channel coding in IMT-2000(International Mobile Telecommunication-2000) system, because it offers better error correcting capability than the traditional convolution/viterbi coding . In this paper, a turbo code decoder for speech transmission in IMT-2000 system with frame size 192 bits, constrait length K=3, generator polynomials G(5,7) and code rate R=1/3 is designed using SOVA(Soft Output Viterbi Algorithm) and block interleaver