• Journal of Aerospace System Engineering
• /
• v.15 no.1
• /
• pp.63-71
• /
• 2021

The South Korean Navy has operated Harpoon guided missiles through step-by-step acquisition after adopting them for the first time in 1978. As Harpoon guided missiles have been operated for a long time, it is necessary to make an active follow-up logistics support to guarantee their performance. Inspection of guided missiles is a basic activity to check the status of missiles. This study was conducted to check if the existing inspection interval of Harpoon guided missiles that have been operated for a long time was appropriate. Regarding research methods, based on the Navy's field operation materials, this study analyzed and presented inspection interval by section according to the period of operation, utilizing the Martinez's theory and a non-parametric MCF technique.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.71-71
• /
• 2000

In this paper, the fuzzy system is applied to MCZ Crystal Grower using at industrial field. The existing controller, which is PID controller, has a fixed gain and as a result of it it can not have an adaptive control function against the error or disturbance. Hence, the machine operator should always check the process status and when the error is occurred, the quality and the productivity may be decreased by each personal capability. In order to remove this drawback, a fuzzy control system which is known to be adaptive and flexible is applied to the machine. After applying the fuzzy system, and compared with the existing system, the diameter deviation and the defects were decreased. we proved the possibility of application fuzzy system to single silicon crystal grower.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.92-98
• /
• 2008

A beam steering system of X-band 2-D phased array antenna for radar application is developed. The beam steering system consists of real-time command generator, beam steering unit, control PCB of array module and power supply. It plays a role of beam steering and on-line check of phased array antenna. The performance of beam steering system is verified with pulse timing of current control in phase shifters and measurement of far-field of phased array antenna. The developed beam steering system offers basic technology to develop full-scale beam steering system of multi-function radar.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.767-775
• /
• 2018

To develop and check a Radar Processor Unit, checking the function and performance of the requirement is very important factor in developing Radar. General methods for verifying the Radar is simulation test, environment linkage test and field operation test, firstly, in case of requirement analysis phase, verify Radar algorithm and design by using mathematical method based simulation test method, and secondly, in case of unit test and integrated test phase, Test Equipment is set to simulate radar environment in the lab to verify radar function and performance. Lastly, field operation test phase is carried out to confirm the function and performance after it is mounted on the actual equipment. To successfully develop Radar Processor Unit, using the method of field operation test method after sufficient test cases are tested in radar environmental interlocking method in order to save cost and testing period and because of this reason, development of the Radar Processor Unit Test Equipment is becoming very important factor. In this paper, we introduce the concept of test equipment development and important factors in test equipment, which are target simulation, data processing and device interlocking.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.3
• /
• pp.43-49
• /
• 2008

The pump control valve is a butterfly valve that has an eccentric rotating axis. It is not only used as a butterfly valve to control the flow rate or pressure, but also as a check valve to prevent backward flow. A new design method of eccentric rotating axis is proposed to design the valve. The height of the rotating axis is determined through flow field analysis. A general purpose of computational fluid dynamics software system, Fluent is used to simulate the fluid flow. Flow field analysis is performed for various heights of the rotating axis and different opening angles of the valve. A characteristic function is defined for estimating the flow characteristics based on the results of flow field analysis. The characteristic function is defined in order to determine the height of the rotating axis. An optimization problem with a characteristic function is formulated to determine the amount of eccentricity. The height of the Totaling axis of the valve is determined through solving the optimization problem.

• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.11-16
• /
• 2003

This paper implements Multiple User Authentication System to which the system authenticating with password only has been upgraded. The 4-staged authentication including user ID, password, smart card and access control information, etc. is used at the suggested Multiple User Authentication System. The user authentication system that this paper suggests has been developed based on SecuROS/FreeBSD with the function of access control added to FreeBSD kernel. It provides both the function to limit accost range to the system to each user and the function to check that when inputting important information the demand is the one if the system ; thus, the reliability becomes increased. In the SecuROS/FreeBSD system, MAC and RBAC are being used. So, in the case of users accessing to the system, the Information about the policies of MAC and RBAC to which users would access is used in the authentication. At the time, the access to system if permitted only when the access control information that users demanded satisfies all the access control rules which have been defined In the system.

• Journal of Internet Computing and Services
• /
• v.3 no.4
• /
• pp.19-26
• /
• 2002

Workflow Management Systems(WFMSs) is a software system that supports that specification and execution of business processes. In this paper, we proposed Multi Agent Based Workflow Modeling System which was implemented by Java application. The proposed workflow modeling system is divided into four agents; Session, Organization, Relevant Data. Invoked Application. We adapted ICN(Information Control Net) to check workflow model syntax, And the proposed modeling system provide the function to import/export WPDL which was defined in WfMC.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.371-374
• /
• 2011

In this paper, a software development for design of the small photovoltaic system which is used to LED lighting is presented. For optimal design of photovoltaic systems, the operating power consumption of the LED load is considered to estimate the capacity of the solar module and battery. In order to give system design engineers a high ease of use, the software tool provides a graphical user interface and monitoring function to check operation of the system prior to installation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.703-712
• /
• 1994

This paper presents an automatic conversion of machining data from the orthographic views of press mold by feature recognition rule. The system includes following 6 modules : separation of views, function support, dimension text recognition, feature recognition, dimension text check and feature processing modules. The characteristic of this system is that with minimum user intervention, it recognizes basic features such as holes, slots, pockets and clamping parts and thus automatically converts CAD drawing details of press mold into machining data using 2D CAD system instead of using an expensive 3D Modeler. The system is developed by using IBM-PC in the environment of AutoCAD R12, AutoLISP and MetaWare High C. Performance of the system is verified as a good interfacing of CAD and CAM when applied to a lot of sample drawings.

• IE interfaces
• /
• v.7 no.3
• /
• pp.181-191
• /
• 1994

This paper presents an automatic conversion of machining data from the orthographic views of press mold by feature recognition rule. The system includes following 6 modules : separation of views, function support, dimension text check and feature processing modules. The characteristic of this system is that with minimum user intervention, it recognizes basic features such as holes, slots, pockets and clamping parts and thus automatically converts CAD drawing details of press mold into machining data using 2D CAD system instead of using an expensive 3D Modeler. The system is developed by using IBM-PC in the environment of AutoCAD R12, AutoLISP and MetaWare High C. Performance of the system is verified as a good interfacing of CAD and CAM when applied to a lot of sample drawing.