• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.6
• /
• pp.39-46
• /
• 2018

Low-floor buses service in Korea has been spreading nationwide for transportation users with wheelchair since 2004. However, there is a lot of difficulty in using this information because the low-floor bus information is insufficient. Therefore, it is necessary to improve the service of using low-floor buses for the transportation weak in order to increase the usage rate of low-floor buses for those who use wheelchairs. In this paper, we designed and implemented a low-floor bus reservation system to provide low-floor bus service and low-floor bus reservation service to improve low-floor bus service of wheelchair users. The application of this system is expected to provide a better service to the transportation weak people using low - floor buses.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.317-320
• /
• 2002

Recently, AMBA(Advanced Microcontroller Bus Architecture) is used as common system bus at embedded system. In this paper, we described test method of peripheral device which is connected to AMBA according to the bus interface defined by AMBA protocol We implemented one of the APB(Advanced Peripheral Bus) peipheral module, GPIO(General Purpose Input/output), and tested its functionality as il is connected to the AMBA system.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.201-205
• /
• 2001

This paper presents the load modeling process and bus load models for KEPCO power system. At first, load devices commonly used in KEPCO power systems were selected, and tested for measuring the voltage and frequency sensitivity of active and reactive power. From this test, about 40 voltage and frequency dependent load models have been obtained. The bus load composition rate for KEPCO power system has been determined using the various recent surveys and papers in order to develop the load model for a power system bus. To verify the accuracy of developed bus load models, the field test for measuring active and reactive power according to artificial variation of the bus voltage was performed at 8 substations for spring summer, autumn, winter cases. With data of this seasonal field test, more reliable bus load models for KEPCO power systems were developed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.330-335
• /
• 2012

A Bus Trunk System for Wind Tower is introduced. A marine cable has been widely used in wind tower or other offshore structure. However, as the electric load capacity is getting increased, the large number of cable lines should be used to cover such a huge amount of electric capacities, which makes the installation make quite difficult due to the heavy weight and volume of the present cables. On the other hand, by using a single bus trunk system line, the power capacity amount of 16 number of cable can be delivered with significant compactness. However, unlike flexible cable, the bus trunk is relatively stiff which could arise resonance phenomenon in the operating condition of wind tower, therefore, the vibration characteristics of bus trunk should be investigated and verify its long-term reliability during the life time of the wind tower.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.5
• /
• pp.41-47
• /
• 2019

A BIS(Bus Information System) collects, processes and analyzes information such as real-time location and operation status during bus operation. And It is a system that provides valid information to citizens, drivers, traffic centers and bus companies. Transport information system sent by an each bus is collected through GPS(Global Positioning System), DSRC(Dedicated Short Range Communications), Beacon and passed to transport information center. BIS data by collected is handled and analyzed. Next, it is transmitted to citizen, drivers and bus companies in real time. The result of 5 times simulation satisfied the test criteria(error range ${\pm}10m$) with an average error range of 3.306m, and the reliability is increased. In this paper, we propose a improved location transfer component that can provide users to quicker and more accurate location information than existing BIS using GPS of smart phone. It can be seen that reliability is improved by securing improved bus position data.

• Journal of the Korea Society for Simulation
• /
• v.3 no.1
• /
• pp.29-42
• /
• 1994

The architecture of a MIMD-type parallel computer system is specified: a simulator is developed to support design and evaluation of systems based on the architecture: and conducted with the simulator to evaluate system performance. The horizontal/vertical-bus(H/V-bus) system architecture provides an NxN array of processing elements which communicate with each other through a network of N horizontal buses and N vertical buses. The simulator, written in SLAM II and FORTRAN, is designed to provide high-resolution in simulating the IPC mechanism. Parameters provide the user with independent control of system size, PE speed and IPC mechanism speed. Results generated by the simulator include execution times, PE utilizations, queue lengths, and other data. The simulator is used to study system performance when a partial differential equation is solved by parallel Gauss-Seidel method. For comparisons, the benchmark is also executed on a single-bus system simulator that is derived from the H/V-bus system simulator. The benchmark is also solved on a single PE to obtain data for computing speedups. An extensive analysis of results is presented.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.961-962
• /
• 2006

The AMBA(Advanced Microcontroller Bus Architecture) system is one of the most important elements having an influence upon system performance in ARM-based SoC environments. The system guarantees easy connection and good performance as a 32-bit bus system for ARM processors. In this paper, we analyze arbitration algorithms for the AHB bus of the AMBA system and propose an efficient algorithm to improve the performance of the bus system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.2
• /
• pp.88-97
• /
• 1990

In this paper, DPA bus is proposed for implementation of MC 68000 based tightly-coupled multiprocessor system. The DPMC and arbiter are designed that the local memory of each PE can accept memory request both from a local processor and from the system bus. The performance of the proposed system bus is evaluated by Stochastic Petri Net(SPN) system modeling. The processing power, the efficiency, and the utilization of system bus are simulated for various load factors.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.101-107
• /
• 2009

Growth in the VLSI process and design technology is resulting into a continuous increase in the number of IPs on a chip to form a system. Because of many IPs on a single chip, efficient communication between IPs is essential. We propose a dynamically reconfigurable 3-layer bus structure which can adapt to the pattern of data transmission to achieve an efficient data communication between various IPs. The proposed 3-layer bus can be reconfigured to multi-single bus mode, and single-multi bus mode, thus providing the benefits of both single-bus and multi-bus modes. Experimental results show that the flexibility of the proposed bus structure can reduce data transmission time compared to the conventional fixed bus structure. We incorporated the proposed bus structure in a JPEG system and verified that the proposed structure achieved an average of 22% improvement in time over the conventional fixed bus structure.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.127-134
• /
• 2013

While there are many services that can check current traffic condition and application program such as bus arrival alarm are developed, since it only provide simple alarm and check level of information, it is still insufficient in many senses. Therefore, the program that try to develop in this study is the system that predict arrival time to destination and inform the bus passengers by applying real time traffic information. The system developed related to this study is still very inadequate. In the system developed in this thesis, when the user input the current bus number and destination using smart-phone, relevant server acquire the bus route information from bus information DB, and analyze real time traffic information based on the information from traffic information DB, and inform customer of expected arrival time to destination. In this thesis, traffic congestion can be eased off and regular operation of public transportation can be improved with reliable destination arrival alarm. Also, it is considered that pattern of bus users can be analyzed by using these information, and analyzing average transport speed and time of public transportation, travel time depending on various situation can give a boost to study related to transportation information and its development.