• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.412-429
• /
• 2008

As the amount of electronic documents increases rapidly with the growth of the Internet, a parallel search engine capable of handling a large number of documents are becoming ever important. To implement a parallel search engine, we need to partition the inverted index and search through the partitioned index in parallel. There are two methods of partitioning the inverted index: 1) document-identifier based partitioning and 2) keyword-identifier based partitioning. However, each method alone has the following drawbacks. The former is convenient in inserting documents and has high throughput, but has poor performance for top h query processing. The latter has good performance for top-k query processing, but is inconvenient in inserting documents and has low throughput. In this paper, we propose a hybrid partitioning method to compensate for the drawback of each method. We design and implement a parallel search engine that supports the hybrid partitioning method using the Odysseus DBMS tightly coupled with information retrieval capability. We first introduce the architecture of the parallel search engine-Odysseus/parallel-OOSQL. We then show the effectiveness of the proposed system through systematic experiments. The experimental results show that the query processing time of the document-identifier based partitioning method is approximately inversely proportional to the number of blocks in the partition of the inverted index. The results also show that the keyword-identifier based partitioning method has good performance in top-k query processing. The proposed parallel search engine can be optimized for performance by customizing the methods of partitioning the inverted index according to the application environment. The Odysseus/parallel OOSQL parallel search engine is capable of indexing, storing, and querying 100 million web documents per node or tens of billions of web documents for the entire system.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.12
• /
• pp.45-52
• /
• 2015

With the rising interest in the environment, more attention on ecological restoration for damaged slope surface to restore its original state has been drawn. Generally, the most useful method is vegetation based spray work. This method uses green soil including sewage sludge, sawdust, paper sludge, and weathered granite soil. However, because there are neither accurate information nor test values about green soil, green soil is often lost by environmental factors such as rainfalls and strong winds. To solve the problem of green soil, it is necessary to prepare design standards about green soil, and conduct studies to deal with green soil loss in consideration of various variables including basic material property, soil quality of slope surface, and weather. This study was conducted in the mixture of green soil and eco-friendly soil stabilizer. With green soil, basic material property test and compaction test were conducted for the analysis on the basic characteristics of green soil. In the mixture with soil stabilizer at a certain ratio, we conducted shear strength test depending on the ratio in order to analyze the maximum shear strength, cohesion and the change in internal friction angles. Furthermore, in the mixture ratio of green soil and soil stabilizer, which is the same as the ratio in the shear strength test, an inclination of slope surface was made in laboratory for the analysis on erosion and germination rate. Finally, this study evaluated the most effective and economic mixing ratio of soil stabilizer to cope with neighboring environmental factors. According to the test, the shear strength of green soil increased up to 51% rely onto the mixing ratio of and a curing period, and its cohesion and internal friction angle also gradually increases. It is judged that the mixture of soil stabilizer was effective in improving shear strength and thereby increased the stability of green soil.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.20-55
• /
• 2016

Koguryo's tomb mural paintings in North Korea are our precious cultural heritage which have been designated as UNESCO World Heritage property receiving high praise in the following criterion, i) exceptional creativeness of human being, ii) representative value showing the stage of development in construction history of East-Asia, iii) aesthetic superiority iv) uniqueness of building construction including tombs' ceiling. Mural paintings have been found from almost 100 tombs of the Koguryo dynasty out of 130 which are scattered across Huanren County, Lianoning Province, Ji'an, Jilin Province in China and Pyongyang in North Korea. Especially, most of them are gathered in Pyongyang from 4th and 5th century. Peculiarly, some of them have been constructed before King Jangsu's transfer of the capital to Pyongyang(AD 427). It can be regarded that Pyongyang territory had been under control of Koguryo and to become a new capital in the near future. And dense emergence of such tombs since the capital transfer from Gungnae City to Pyongyang during the reign of Jangsu is linked closely to the construction of tombs for rulers under strengthen royal authority of Jangsu and centralized system of authoritarian rule. Tomb mural paintings describe the owner's figure pictorially based on the truth just as in his living years. General lifestyles of ruling powers and sovereigns can be seen from the wall paintings portraying several buildings with various styles, figures, manners of living, which are considered that the tomb owner had led politically and sociologically in his life. In spite of not enough proofs to approve figure of architectures or "Gong-Po" in wall paintings on the tombs as those of Koguryo, it is persuasive with consideration for painting and decoration inside the tomb like wooden building in real life for the purpose of reenacting and continuing the tomb owner's luxurious life after death. "Du-Gong-Po-Zak" had appeared in company with Koguryo tomb murals and it can be found in most of the murals. And the emergence of substantial "Gong-Po-Do" can be counted more than a century ahead of the figure in murals. It could be a reasonable assumption as regards Koguryo tomb murals time of appearance match up with production period of Gahyungmyunggi(家形明器) and Hwasangseok(畵像石) Hwasangjeon(畵像塼) Design in the Mural Painting of the East-Han(東漢) Ancient Tombs in China. On this study, architectural "Gong-Po"s described in Koguryo tomb murals are categorized largely in "Bi(non)-Po-Zak-kye", "Jun(semi)-Po-Zak-kye", and "Po-Zak-kye" based on presence of "Ju-Du", "Cheom-Cha", and "Cheom-Cha-Sal-Mi" with developmental aspect, and, "Po-zak" is subdivided as "Bi(non)-Cheul-Mok" and "Cheul-Mok" types.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.3
• /
• pp.59-66
• /
• 2023

This study attempts to examine the process of establishing a Japanese-style garden in the modern period through the perspectives of garden designers, spatial composition, spatial components, and materials used in their works, and to use it as data for embodying the identity of Korean garden. The results are as follows: First, by incorporating elements associated with Koreanness into the modern garden culture, there are differences in location, presence, and subjectivity when compared to Japan. This reflects Japan's relatively seamless cultural continuity compared to Korea's cultural disconnection during the modern period. Second, prior to the modern period, Japan's garden culture spread and continued to develop throughout the country without significant interruptions. However, during the modern period, the Meiji government promoted the policy of 'civilization and enlightenment (Bunmei-kaika, 文明開化)' and introduced advanced European and American civilizations, leading to the popularity of Western-style architectural techniques. Unfortunately, the rapid introduction of Western culture caused the traditional Japanese culture to be overshadowed. In 1879, British architect Josiah Condor guided Japanese architects and introduced atelier and traditional designs of Japanese gardens into the design. The garden style of Ogawa Jihei VII, a garden designer in Kyoto during the Meiji and Taisho periods, was accepted by influential political and business leaders who sought to preserve Japan's traditional culture. And a protection system of garden was established through the preparation of various laws and regulations. Third, as a comprehensive analysis of Japanese modern gardens, the examination of garden designers, Japanese components, materials, elements, and the Japanese-style showed that Yamagata Aritomo, Ogawa Jihei VII, and Mirei Shigemori were representative garden designers who preserved the Japanese-style in their gardens. They introduced features such as the creation of a Daejicheon(大池泉) garden, which involves a large pond on a spacious land, as well as the naturalistic borrowed scenery method and water flow. Key components of Japanese-style gardens include the use of turf, winding garden paths, and the variation of plant species. Fourth, an analysis of the Japanese-style elements in the target sites revealed that the use of flowing water had the highest occurrence at 47.06% among the individual elements of spatial composition. Daejicheon and naturalistic borrowed scenery were also shown. The use of turf and winding paths were at 65.88% and 78.82%, respectively. The alteration of tree species was relatively less common at 28.24% compared to the application of turf or winding paths. Fifth, it is essential to discover more gardens from the modern period and meticulously document the creators or owners of the gardens, the spatial composition, spatial components, and materials used. This information will be invaluable in uncovering the identity of our own gardens. This study was conducted based on the analysis of the process of establishing the Japanese-style during Japan's modern period, utilizing examples of garden designers and gardens. While this study has limitations, such as the absence of in-depth research and more case studies or specific techniques, it sets the stage for future exploration.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.2
• /
• pp.5-15
• /
• 2020

The liquefaction phenomenon that occurred during the Pohang earthquake (M_L=5.4) brought new awareness to the people about the risk of liquefaction caused by the earthquake. Liquefaction hazard maps with 2 km grid made in 2014 used more than 100,000 borehole data for the whole country, and regions without soil investigation data were produced using interpolation. In the mapping of macro liquefaction hazard for the whole country, the site amplification effect and the ground water level 0 m were considered. Recently, the Ministry of Public Administration and Security (2018) published a new site classification method and amplification coefficient of the common standard for seismic design. Therefore, it is necessary to rewrite the liquefaction hazard map reflecting the revised amplification coefficient. In this study, the results of site classification according to the average shear wave velocity in soils before and after revision were compared in the whole country. Also, liquefaction assessment results were compared in Gangseo-gu, Busan. At this time, two ground accelerations corresponding to the 500 and 1,000 years of return period and two ground water table, 5 m for the average condition and 0 m the extreme condition were applied. In the drawing of liquefaction hazard map, a 500 m grid was applied to secure a resolution higher than the previous 2 km grid. As a result, the ground conditions that were classified as S_C and S_D grounds based on the existing site classification standard were reclassified as S₂, S₃, and S₄ through the revised site classification standard. Also, the result of the Liquefaction assessments with a return period of 500 years and 1,000 years resulted in a relatively overestimation of the LPI applied with the ground amplification factor before revision. And the results of this study have a great influence on the liquefaction assessment, which is the basis of the creation of the regional liquefaction hazard map using the amplification factor.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.1
• /
• pp.123-134
• /
• 2014

Identification of methods to optimize the growth of a plant community, including the capacity of the soil to further sequester carbon, is important in urban design and planning. In this study, to construct and manage an urban park to mitigate carbon emissions, soil organic carbon of varying biomass, different park construction times, and a range of vegetation types were analyzed by measuring aboveground and belowground carbon in Seoseoul Lake Park and Yangjae Citizen's Forest. The urban parks were constructed during different periods; Seoseoul Lake Park was constructed in 2009, whereas Yangjae Citizen's Forest was constructed in 1986. To identify the differences in soil organic carbon in various plant communities and soil types, above and belowground carbon were measured based on biomass, as well as the physical and chemical features of the soil. Allometric equations were used to measure biomass. Soil total organic carbon (TOC) and chemical properties such as pH, cation exchange capacity (CEC), total nitrogen (TN), and soil microbes were analyzed. The analysis results show that the biomass of the Yangjae Citizen's Forest was higher than that of the Seoseoul Lake Park, indicating that older park has higher biomass. On the other hand, TOC was lower in the Yangjae Citizen's Forest than in the Seoseoul Lake Park; air pollution and acid rain probably changed the acidity of the soil in the Yangjae Citizen's Forest. Furthermore, TOC was higher in mono-layered plantation area compared to that in multi-layered plantation area. Improving the soil texture would, in the long term, result in better vegetation growth. To improve the soil texture of an urban park, park management, including pH control by using lime fertilization, soil compaction control, and leaving litter for soil nutrition is necessary.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.5_6
• /
• pp.307-318
• /
• 2003

In this paper, we design and construct a TMO object group that provides the guaranteed real-time services in the distributed object computing environments, and verify execution power of its model for the correct distributed real-time services. The TMO object group we suggested is based on TINA's object group concept. This model consists of TMO objects having real-time properties and some components that support the object management service and the real-time scheduling service in the TMO object group. Also TMO objects can be duplicated or non-duplicated on distributed systems. Our model can execute the guaranteed distributed real-time service on COTS middlewares without restricting the specially ORB or the of operating system. For achieving goals of our model. we defined the concepts of the TMO object and the structure of the TMO object group. Also we designed and implemented the functions and interactions of components in the object group. The TMO object group includes the Dynamic Binder object and the Scheduler object for supporting the object management service and the real-time scheduling service, respectively The Dynamic Binder object supports the dynamic binding service that selects the appropriate one out of the duplicated TMO objects for the clients'request. And the Scheduler object supports the real-time scheduling service that determines the priority of tasks executed by an arbitrary TMO object for the clients'service requests. And then, in order to verify the executions of our model, we implemented the Dynamic Binder object and the Scheduler object adopting the binding priority algorithm for the dynamic binding service and the EDF algorithm for the real-time scheduling service from extending the existing known algorithms. Finally, from the numerical analyzed results we are shown, we verified whether our TMO object group model could support dynamic binding service for duplicated or non-duplicated TMO objects, also real-time scheduling service for an arbitrary TMO object requested from clients.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.1
• /
• pp.52-71
• /
• 2011

This study was initiated with the intent to consider the features of Gugokwonlim and to compare Gabsagugok(甲寺九曲) to Yongsangugok(龍山九曲) against the backdrop of Mt. Gyeryong by revealing their nature and confirming the names and exact locations. A literature review, interviews with local people and field studies confirmed that Gabsagugok and Yongsangugok are each composed of 9 seasonal features. The former is made up of Yongyuso(龍遊沼) - Iilcheon(二一川) - Baengnyonggang(白龍岡) - Dalmuntaek(達門澤) - Geumgyeam(金鷄?) - Myeongwoldam(明月潭) - Gyemyeongam(鷄鳴巖) - Yongmunpok(龍門瀑) - Sujeongbong(水晶峰) while the latter is made up of Simyongmun(尋龍門) - Eunnyongdam(隱龍潭) - Waryonggang(臥龍剛) - Yuryongdae(遊龍臺) - Hwangnyongam(黃龍岩) - Hyeollyongso(見龍沼) - Ullyongtaek(雲龍澤) - Biryongchu(飛龍湫) - Sillyongyeon(神龍淵). Both Gabsagugok and Yongsangugok are part of Gugokwonlim built in the valleys of Mt. Gyeryong in the late Joseon Dynasty by Byeoksu Yun Deok-yeong (1927) and Chwieum Gwon Jun-myeon (1932), respectively, with a 5 year difference. Gabsagugok was supposedly designed to reflect an individual taste for the arts and to admire principles of Juyeok (ch. Zhouyi) and the beauty of nature. On the contrary, Yongsangugok appears to be the builder's expression of his longing for independence day, likened to the life of a dragon after receiving the sad news of Japan's annexation of Korea. Such differences show that these two builders had very different intentions from one another. The letters of Gabsagugok have a semi cursive style and were deeply engraved on the rock in a square shape. Consequently they have not been worn away except for those in Yongyuso, the first Gok. In contrast, the letters in Yongsangugok have an antiquated, cursive-Yija style but because they were engraved relatively lightly, serious wear and damage occurred. In terms of location, Gabsagugok was built around Ganseongjang adjacent to the 5th Gok while Yongsangugok was set up around the 5th Gok, Hwangnyongam. Meanwhile, the important motif which forms the background of Gabsagugok seemingly highlights the geographic identity of Mt. Gyeryong using the dragon and the chicken as themes. It also appears to symbolize the principles of Juyeok focusing on Kan of the Eight Trigrams for divination; this requires an in-depth study for confirmation. The main motif and theme of Yongsangugok is the dragon. It infuses the builder's intentions in Sangsinri Valley by communicating with nature through a story of a dragon's life from birth to ascension. It is assumed that he tried to use this story to express his hope for restoring the national spirit and reconstructing the country.

• Journal of Intelligence and Information Systems
• /
• v.24 no.2
• /
• pp.221-241
• /
• 2018

Deep learning is getting attention recently. The deep learning technique which had been applied in competitions of the International Conference on Image Recognition Technology(ILSVR) and AlphaGo is Convolution Neural Network(CNN). CNN is characterized in that the input image is divided into small sections to recognize the partial features and combine them to recognize as a whole. Deep learning technologies are expected to bring a lot of changes in our lives, but until now, its applications have been limited to image recognition and natural language processing. The use of deep learning techniques for business problems is still an early research stage. If their performance is proved, they can be applied to traditional business problems such as future marketing response prediction, fraud transaction detection, bankruptcy prediction, and so on. So, it is a very meaningful experiment to diagnose the possibility of solving business problems using deep learning technologies based on the case of online shopping companies which have big data, are relatively easy to identify customer behavior and has high utilization values. Especially, in online shopping companies, the competition environment is rapidly changing and becoming more intense. Therefore, analysis of customer behavior for maximizing profit is becoming more and more important for online shopping companies. In this study, we propose 'CNN model of Heterogeneous Information Integration' using CNN as a way to improve the predictive power of customer behavior in online shopping enterprises. In order to propose a model that optimizes the performance, which is a model that learns from the convolution neural network of the multi-layer perceptron structure by combining structured and unstructured information, this model uses 'heterogeneous information integration', 'unstructured information vector conversion', 'multi-layer perceptron design', and evaluate the performance of each architecture, and confirm the proposed model based on the results. In addition, the target variables for predicting customer behavior are defined as six binary classification problems: re-purchaser, churn, frequent shopper, frequent refund shopper, high amount shopper, high discount shopper. In order to verify the usefulness of the proposed model, we conducted experiments using actual data of domestic specific online shopping company. This experiment uses actual transactions, customers, and VOC data of specific online shopping company in Korea. Data extraction criteria are defined for 47,947 customers who registered at least one VOC in January 2011 (1 month). The customer profiles of these customers, as well as a total of 19 months of trading data from September 2010 to March 2012, and VOCs posted for a month are used. The experiment of this study is divided into two stages. In the first step, we evaluate three architectures that affect the performance of the proposed model and select optimal parameters. We evaluate the performance with the proposed model. Experimental results show that the proposed model, which combines both structured and unstructured information, is superior compared to NBC(Naïve Bayes classification), SVM(Support vector machine), and ANN(Artificial neural network). Therefore, it is significant that the use of unstructured information contributes to predict customer behavior, and that CNN can be applied to solve business problems as well as image recognition and natural language processing problems. It can be confirmed through experiments that CNN is more effective in understanding and interpreting the meaning of context in text VOC data. And it is significant that the empirical research based on the actual data of the e-commerce company can extract very meaningful information from the VOC data written in the text format directly by the customer in the prediction of the customer behavior. Finally, through various experiments, it is possible to say that the proposed model provides useful information for the future research related to the parameter selection and its performance.