• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.194-202
• /
• 1998

This paper shows two models of the duplex system having a fault tolerant system characteristic used in airplane and railway system. The architecture of these systems is based on Mc68000, and we designed the single system, single duplex system, dual system and dual duplex system to evaluate the system characteristic. We calculate the failure rate of components using MIL-SPEC-2l7F and evaluate the reliability, avaliability, safety and MTTF(Mean Time To Failure) of the designed systems by Markov model. We choose our system depending on the developing system characteristic.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.5
• /
• pp.381-394
• /
• 2018

An address is sub-spatial data representing a location, and identifies the place in which a resident's life is based. The Korean address system has changed from an area-based address system to the Road Name Address System in 2014 to solve the problems of the area-based address system and to accept the international address standards. Although the Road Name Address System is continually being modified and implemented it limitations. Therefore, the purpose of this study is to resolve these limitations and to analyze and redefine the Road Name Address System of Korea to implement the street-based address system. To understand the address, we define the components of the address system and analyze the Korean Road Name Address System based on each component to derive the limit. To resolve the limitations of the Road Name Address System and to implement the street-based address system, the Road Name Address System is redefined according to three aspects. Finally, we evaluate the usability of the Road Name Address System proposed in this study through address based geocoding.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.1-10
• /
• 2004

In view of global environmental problems and resource exhaustion, we must develop new energy resources that are abundant and provide substitutes for fossil fuels. Renewable energies, such as solar, are ideal because they are clean, inexhaustible, and available everywhere in the world. Photovoltaic(PV) system, in general, are operated as a stand-alone, grid-tied, or hybrid system. Many of the stand-alone PV systems are installed. Although the pre-installation cost of PV system is high, it poorly has been operated due to the absence of optimal management standards. Therefore a study on the performance of PV system is important for the system design and maintenance. In this paper a photovoltaic lighting system was resigned according to load consumption. Then a PV lighting system which used electrodeless lamp as a load was installed. In order to investigate the system operating characteristics we've added a monitoring system to the PV lighting system. The monitoring system using the LabVIEW program regularly checks the operation of the PV lighting system and records the system data. According to the system data, the stability and availability of the PV lighting system were evaluated.

• The Journal of Society for e-Business Studies
• /
• v.5 no.2
• /
• pp.101-112
• /
• 2000

Costs and times, resources was better decreased than former times because it had been introduced EDI(Electronic Data Interchange) system. Nevertheless, many problems has been raised as before, that is high costs and data re-using, the rapidly changing environment, etc. To solve these problems, it was attempted to introduce XML technology at traditional EDI System. From this point to view, 1 designed and implemented XML/EDI System based on Internet(Internet Messaging System) in this paper. And I selected some services as basic service among many services which is provided at XML/EDI System, that is message sending and message receiving, message retrieval. Other service of client system was composed of MapIn and MapOut module. MapIn Module is to parse the received XML Message and to store XML Data to RDB system. And MapOut module is to generate XML Message after extracting data from RDB system and to transfer XML Message to recipient. Hereby, XML/EDI System(XEDI System) provide document re-using, the various result(output) generation f3r various requirement and directly interface with DB. Therefore, This System(XEDI System) is more various and more flexible than the existing Messaging System that just provide transfer and retrieval service

• Korean System Dynamics Review
• /
• v.6 no.1
• /
• pp.71-98
• /
• 2005

If Korea Research & Development reinforces integrated control function, indeed would Korea Research & Development's output be increased? Truly, could Korea's competition be ultimately improved with technology innovation and accumulation of knowledge. Can reinforcement of Integrated control that reinforced efficiency of Research & Development's investment effects make Korea Research & Development's investment,itself, be decreased? I try to answer clearly that in a way to reorganize Korea technology Administration's system, introduced Korea Research & Development integrated control system's establishment is what to effect Korea innovation system's direction after answering clearly previous mentioned problems. In this study, to answer these problems view theoretical discussion about Korea innovation system, integrated control system and system dynamics. Set up analytic tools of system dynamics which includes Korea innovation system and integrated control system. Then, draw a general casual loop diagram, which includes established Korea Research & Development's integrated control system, of Korea innovation system's activity. In based these, develop situation model to analyze trend of Korea innovation system and derive a political meaning by analyzing value of Korea innovation system's major inflow, outflow and stock variations according to extent of Korea Research & Development's integrated control in the same model.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.3
• /
• pp.110-116
• /
• 2017

System to automate the trial-run of energy storage system for frequency regulation was developed and demonstrated. Basic strategy was developed on the basis of trial-run procedure and verified in the computer simulation tool. The algorithm was developed and coded for 4MW trial-run automation system. 4MW trial-run automation system was connected to 4MW energy storage system for frequency regulation in Jocheon substation of Jeju city and demonstrated. 24MW trial-run automation system was developed on the basis of 4MW trial-run automation system and verified by operation system for 24MW energy storage system for frequency regulation. The operation system has own simulation model of energy storage system and power system. The verification was performed to improve the system in the view of user. 24MW trial-run automation system was demonstrated in 32MW Ul-san and 36MW Non-gong energy storage system. All tests of trial-run was done by manual and first they ware taken 1 week with no trial-run automation system. The manual trial-run tests were taken by maximum three times. Trial-run test by trial-run automation system was taken 2 days. The system helps reduce the trial-run test period and improve the accuracy of tests.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.2
• /
• pp.141-145
• /
• 2009

A C-to-SystemC synthesizer which processes the input behavior according to high-level synthesis, and then transforms the synthesis result into SystemC module code is implemented in this paper. In the synthesis process, the input behavioral description in C source code is scheduled using list scheduling algorithm and register allocation is performed using left-edge algorithm on the result of scheduling. In the SystemC process, the output from high-level synthesis process is transformed into SystemC module code by combining it with SystemC features such as channels and ports. The operation of the implemented C-to-SystemC synthesizer is validated through simulating the synthesis of elliptic wave filter in SystemC code. C-to-SystemC synthesizer can be used as a part of tool-chain which helps to implement SystemC design methodology covering from modeling to synthesis.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.4
• /
• pp.30-36
• /
• 2015

The principle of an illumination and projection system including LED light sources for a spot type stage lighting system was presented, and its optical system was designed with optimizing parameters by the analytical methods. A dichroic mirror incorporated with an illumination system to optimizing LED source positions and to obtain the compact system. The projection system was optimized with specific constraints such as a chromatic aberration, distortion aberration and angle of incidence angles. Optimized design system has a beam angle from $10^{\circ}$ to $45^{\circ}$, and its illuminance was 4,500lux at distance of 6m on the work plane.

• Journal of Korean Institute of Industrial Engineers
• /
• v.5 no.2
• /
• pp.45-56
• /
• 1979

This report presents the development of an integrated logistics support system for a large-scale machinery manufacturing organization. The system consists of 3 major production management systems and 5 assisting systems. The major systems are: i) production planning and control system, ii) cost control system, and iii) material management system. The assisting systems are: i) personnel management system. ii) technology transfer system, iii) quality assurance system, iv) marketing assisting system, and v) management information system. In addition, other management systems such as planning system, R.&.D. system can be considered according to the organizational need. Several system flow models are developed and presented for the total logistics support system.

• Journal of Korean Society for Quality Management
• /
• v.33 no.4
• /
• pp.75-87
• /
• 2005

Generally speaking, weapon system is defined as a combination of primary system and support system which are evaluated by capability and operational availability respectively. Recently comparison of total life cycle cost shows that logistic support system is proved to be more important than primary system. However, until now systematic approach to support system development has not been applied in the area of developing support system. We need to construct a universal metric for effectiveness of logistic support system and to cut out whatever activities or support elements which do not contribute to the metric. This paper describes a new approach based on system engineering approach to logistic support system and also classifies five factors of failure, stock-out frequency, administrative delay time, active repair time and logistic delay time that have influence on operational availability of logistic support system.