• 상하수도학회지
• /
• 제27권2호
• /
• pp.155-164
• /
• 2013

The main purpose of this research was to examine the adsorption/ion exchange characteristics of radioactive species such as cesium and strontium onto synthetic Na-birnessite (sodium-birnessite). As part of efforts to investigate the sorption behavior of cesium and strontium onto synthetic Na-birnessite, batch isotherm tests were performed under different experimental conditions. Na-birnessite was synthesized by the oxidation of $Mn^{2+}$ ions in sodium hydroxide solution. The synthetic Na-birnessite was characterized by powder x-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDS), and Brunauer-Emmett-Teller (BET) surface area analysis. Cesium and strontium concentrations were determined by atomic absorption spectroscopy (AAS). The removal efficiency of strontium by Na-birnessite was around 95 % which was much higher than that of cesium (~ 32 %). The results imply that strontium has a higher affinity for Na-birnessite than cesium because strontium, divalent cation leads to larger electrostatic attraction than monovalent cesium.

• 한국염색가공학회지
• /
• 제31권3호
• /
• pp.177-186
• /
• 2019

In this study, we investigated for synthetic hydrotalcite in chloroprene rubber foam. Experiments were carried out to find the optimum content ratio by controlling the contents of MgO and Hydrotalcite. Swelling test in toluene immersion was made to measure the crosslinking density of CR foams, and the cure properties were investigated with flat die rheometer and Mooney viscosity. The difference of hardness, tensile strength and elongation at break were observed after immersing in 7% NaCl or 21% NaCl solutions for a day and four days. In addition, the volume change and water content remaining in CR foam were measured after immersing NaCl solution. As content of MgO increased, the value of the cure torque tended to increase, but it was almost constant above 2phr of MgO. However, the Mooney viscosity decreased with increasing MgO content. The crosslinking density, determined by the swelling ratio, showed that the CR compound without MgO showed a higher degree of swelling. When the content of hydrotalcite/MgO was 3:2, it was the lowest volume change of CR form. Also, As the content of hydrotalcite decreased, the difference of mechanical properties before and after immersion NaCl solution increased.

• 한국수자원학회논문집
• /
• 제34권6호
• /
• pp.627-640
• /
• 2001

일반적으로 합성단위도법은 강우-유출기록이 없는 유역의 설계홍수량 산정을 위해 제안되었다. 그러나 국내에서는 아직까지 자료의 부족 등으로 외국에서 개발된 각종 유출모의 모형이 주로 이용되고 있다. 따라서 그 동안 축적된 국내의 강우-유출 자료를 이용하여 국내의 수문특성엥 적합한 유출모형의 개발이 절실한 상황이다. 이를 위해 본 연구에서는 설마천 유역의 2개 지점과 IHP 대표유역인 평강창, 보청천, 위천의 17개 지점에 대해 그 동안 축 (중략) 특성 관련 연구결과를 종합하여 새로운 합성단위도법을 개발하였다. 개발된 합성단위도는 유역특성인자와 단위도치식 치(첨두시간, 첨두유량)와의 다중회귀분석을 통해 유역면적-유로연장-유로경사의 3가지 변수로 구성되는 효 (중략) 전국을 있었다. 따라서 우리나라에서는 아직까지 수계별로 합성단위도를 분리하여 제시하기는 무리라고 보여지 (중략)

• 물과 미래
• /
• 제27권1호
• /
• pp.69-77
• /
• 1994

생활수준이 향상됨에 따라 세제의 사용량이 큰 폭으로 증가하고 있으며, 하수처리공정에서 완전히 처리되지 못한 합성세제가 하천이나 강으로 흘러들어 지표수의 오염을 가중시키고 있다. 이와같은 세제는 수중생물에 해로운 여러 독성물질을 함유하고 있으며, 현재까지는 주로 화학적 분석에 의하여 그 독성을 측정하고 있다. 그러나 오염물질 상호간의 작용 등으로 화학분석만으로 적정기간동안에 독성을 평가하는 것은 상당히 어려운 실정인 바, 본 논문에서는 물벼룩인 Daphnia magna와 형광성 박테리아인 Photobacterium phosphoreum을 이용하여 생물학적으로 주방용 세제와 의류용 세제의 급성 독성을 평가하였다. 본 평가에 사용된 세제는 세탁용 세제와 주방용 세제로 구분하여 국내 사용량이 가장 많은 7종류를 선택하였으며, 조사결과 세탁용 세제의 평균 24hr, 48hr-LC50은 각각 4.25%, 2.50%이며, 주방용 세제의 평균 24hr, 48hr-LC50은 각각 2.01%, 1.36%이었다. 또한 세탁용 세제의 평균 5min, 15min-EC50은 각각 1.83%, 1.02%이며, 주방용 세제의 평균 5min, 15min-EC50은 각각 1.57%, 1.21% 이었다. 이를 통하여 국내에서 사용되는 합성세제중 주방용 세제가 세탁용 세제보다 지속적 독성이 큰 것을 알 수 있었으며 세제마다 독성의 정도가 차이가 있었다.

• Journal of Animal Science and Technology
• /
• 제65권5호
• /
• pp.895-911
• /
• 2023

Processed meat products play a vital role in our daily dietary intake due to their rich protein content and the inherent convenience they offer. However, they often contain synthetic additives and ingredients that may pose health risks when taken excessively. This review explores strategies to improve meat product quality, focusing on three key approaches: substituting synthetic additives, reducing the ingredients potentially harmful when overconsumed like salt and animal fat, and boosting nutritional value. To replace synthetic additives, natural sources like celery and beet powders, as well as atmospheric cold plasma treatment, have been considered. However, for phosphates, the use of organic alternatives is limited due to the low phosphate content in natural substances. Thus, dietary fiber has been used to replicate phosphate functions by enhancing water retention and emulsion stability in meat products. Reducing the excessive salt and animal fat has garnered attention. Plant polysaccharides interact with water, fat, and proteins, improving gel formation and water retention, and enabling the development of low-salt and low-fat products. Replacing saturated fats with vegetable oils is also an option, but it requires techniques like Pickering emulsion or encapsulation to maintain product quality. These strategies aim to reduce or replace synthetic additives and ingredients that can potentially harm health. Dietary fiber offers numerous health benefits, including gut health improvement, calorie reduction, and blood glucose and lipid level regulation. Natural plant extracts not only enhance oxidative stability but also reduce potential carcinogens as antioxidants. Controlling protein and lipid bioavailability is also considered, especially for specific consumer groups like infants, the elderly, and individuals engaged in physical training with dietary management. Future research should explore the full potential of dietary fiber, encompassing synthetic additive substitution, salt and animal fat reduction, and nutritional enhancement. Additionally, optimal sources and dosages of polysaccharides should be determined, considering their distinct properties in interactions with water, proteins, and fats. This holistic approach holds promise for improving meat product quality with minimal processing.

• 우주기술과 응용
• /
• 제1권2호
• /
• pp.268-281
• /
• 2021

합성 개구 레이다(SAR, synthetic aperture radar)는 주야간 및 기상 조건에 구애받지 않고 원하는 지점을 관측할 수 있다는 장점으로 인해 최근 그 수요가 점점 늘어나고 있다. SAR 위성으로 관측한 원시 데이터는 위성궤도보정, 방사보정, multi-looking, geocoding과 같은 전처리 과정이 필요하며, 사용자의 목적에 따라 물체 탐지, 변화탐지, DEM(Digital Elevation Model) 등 영상 활용을 하기 위해서는 추가적인 처리 과정이 요구된다. 이러한 전처리와 연산과정은 매우 복잡하며 많은 시간과 컴퓨팅 자원을 필요로 한다. 주로 SAR 영상을 활용하는 기관에서는 영상을 편리하고 쉽게 처리하기 위해 각 기관의 활용 목적에 맞는 분석도구를 개발하여 사용 및 외부 수요자들에게 제공하고 있다. 본 논문에서는 국내외에서 이용하고 있는 대표적인 SAR 분석도구들의 기능 및 특성에 대해 소개하고자 한다.

• 한국환경보건학회지
• /
• 제48권3호
• /
• pp.167-175
• /
• 2022

Background: Disinfection is essential to provide drinking water from a water source. The disinfection process mainly consists of the use of chlorine and ozone, but when chlorine is used as a disinfectant, the problem of disinfection by-products arises. In order to resolve the issue of disinfection by-products, electro-chlorination technology that produces chlorine-based disinfectants from salt water through electrochemical principles should be applied. Objectives: This study surveys the possibility of optimally producing active chlorine from synthetic NaCl solutions using an electro-chlorination system through RSM. Methods: Response surface methodology (RSM) has been used for modeling and optimizing a variety of water and wastewater treatment processes. This study surveys the possibility of optimally producing active chlorine from synthetic saline solutions using electrolysis through RSM. Various operating parameters, such as distance of electrodes, sodium chloride concentration, electrical potential, and electrolysis time were evaluated. Results: Various operating parameters, such as distance of electrodes, sodium chloride concentration, electrical potential, and electrolysis time were evaluated. A central composite design (CCD) was applied to determine the optimal experimental factors for chlorine production. Conclusions: The concentration of the synthetic NaCl solution and the distance between electrodes had the greatest influence on the generation of hypochlorite disinfectant. The closer the distance between the electrodes and the higher the concentration of the synthetic NaCl solution, the more hypochlorous acid disinfectant was produced.

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3433-3440
• /
• 1996

This paper was investigation of the stres corrosion cracking(SCC) mechanism and the properties of corrosion fracture surface of glass fiber reinforced plastics(GFRP) produced by hand lay up(HLU) method in synthetic sea water. Test material is GFRP, that was used vinylester type epoxy acrylate resin and an unsaturated polyester as the matrix and the chopped strand mat(CSM) type E-glss fiber as the reinforcement. The slow strain rate test(SSRT) was performed on dry, wet and saturated wet specimens in sea water. Here the pH concentration of synthetic sea water was 8.2 and the strain rate is 1 x $10^{-6}$($sec^{-1}$) and test temperature ranges varied from $-60^{\circ}C$ to $80^{\circ}C$. It could be confirmed the fact that wet specimens tested at a particular test temperature ranges were appeared the eviences of SCC such as con-planar, mirror and hackle zone. Moreover, SCC of GFRP in sea water was characterised by falt fracture surfaces with only small amounts of fiber pull-out, in partial.

• 한국의류학회지
• /
• 제14권3호
• /
• pp.229-240
• /
• 1990

The purpose of this study was to investigate the effect of hydrophilicity of the fiber on the water vapor transport properties of the fabric by using double layered fabrics of natural and synthetic fibers such as cotton, wool, nylon, dacron, orlon and polypropylene. Wickability and absorption rate were measured to determine the absorbancy of the fabrics. Dynamic and steady state water vapor transport properties were measured by cobaltous chloride method and evaporation method, respectively. Absorption was in the order of orlon> cotton > wool > nylon > polypropylene > dacron. Dynamic surface wetness of synthetic fabrics were faster than that of natural fabrics. For the double layered fabrics, higher water vapor transport was resulted when the natural fabric was exposed to lower vapor pressure and synthetic fabric was exposed to higher vapor pressure than when the fabrics were layered the other way around. Opposite result was obtained for orlon, which suggested that when the fabric of high absorbancy is exposed to the environment and lower absorbancy is to the skin, higher water vapor transpont could be resulted.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.809-814
• /
• 2011

A method based on the TMS derivatives and acidic hydrolysis was developed for the simultaneous determination of free and conjugated steroidal hormones in surface water. A silylation of five natural and two synthetic steroidal hormones was achieved with N-methyl-N-(trimethylsilyl) trifluoroacetamide/$NH_4I$ (1000:3) under catalysis of dithioerythritol for 60 min at $80^{\circ}C$. TMS derivatives of the steroid hormones containing multifunctional groups offer a single derivative product under this condition. The accuracy of the analytes was in the range of 87 to 110% at a concentration of 20 and 50 ng/L with relative standard deviations of less than 10%. The method detection limit was in the range of 0.01 to 0.02 ng/L for surface water. Natural steroidal hormones were detected in a concentration range of 0 to 1.03 ng/L in free form and 0 to 14.6 ng/L in conjugated form, respectively. We found that most of the natural hormonal steroids exist in conjugate forms (43 to 100%) in river water.