• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.4-5
• /
• 2018

The water proofing sheet of synthetic polymer applies to the purification plant, the wastewater treatment center, the low waterway, the dosing tanks, etc, and when we construct these, we apply the dual waterproof by means of hot air staking welder or extruder. However, the experts skilled in the hot air welding or extruder does not use them, it can be a quality problem. Therefore, in this study, it is the purpose to verify whether the semi-automatic hot air staking welder and automatic extruder that can construct the waterproof sheet is possible in field even if it is not a professional specialist.

• 물과 미래
• /
• 제7권1호
• /
• pp.71-77
• /
• 1974

This paper reviews several different single site generation models for further development of a model for generating the Synthetic sequences of streamflow in the continuous streams like main streams in Korea. Initially the historical time series is looked using a time series technique, that is correlograms, to determine whether a lag one Markov model will satisfactorily represent the historical data. The single site models which were examined include an empirical model using the historical probability distribution of the random component, the linear autoregressive model(Markov model, or Thomas-Fiering model) using both logarithms of the data and Matala's log-normal transformation equations, and finally gamma distribution model.

• 한국표면공학회지
• /
• 제25권3호
• /
• pp.144-149
• /
• 1992

The adsorption and molecular sieve characteristics of water, methanol, ethanol, butanol and benzene on acid-alkali treated natural zeolite from Kampo area were investigated by the Diamond·Kinter method, and it was compared with synthetic zeolite A. Adsorption amount of water increased with the treatment of acid rather than the treatment of alkali. Similar tendency was observedd in adsorption of alcohols such as methanol, ethanol and butanol, but the amount of adsorption decreased. From the views of the molecular size, adsorption amount of benzene decreased because of surface activity according to the cations species rather than chemical treatment. And it was almost same value that the amount of adsorption was compared acid treated natural zeolite with synthetic zeolite A.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.729-736
• /
• 2022

Earth is facing a serious problem of pollution and scarcity of energy sources. The synthetic fibers used in automobile and Aerospace manufacturing sectors are non-renewable and harmful to environment. International Agency such as FAA and SAE is forcing for green fuel, green materials and structures. Further exploration is much needed to understand its potential in structural applications. In the current study, hemp and Jute fibre based composites were developed and tested for assessing their suitability for possible applications in automobile and aerospace sectors. Composites were undergone tensile test, water absorption test, and fatigue analysis to understand its behavior under various loading conditions. The finite element analysis has been carried out to understand the fatigue behaviour of composites. The results revealed that the usage of hemp and jute fibre reinforced composites can improve mechanical properties and have shown a viable alternative to replace synthetic fibres such as glass fibres for specific applications. Hemp reinforced bio-composites have shown better performance as compared to Jute reinforced bio-composites while water resistance characteristics for hemp is poorer to jute fibres.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2005년도 Proceedings of KSEH.Minamata Forum
• /
• pp.95-102
• /
• 2005

For decolorization of synthetic dyes, Isolate fungi were investigated for the decolorization of 8 industrial dyes. One fungus isolated from textile wastewater collected from Banweol industrial complex, Korea showed excellent ability for removing synthetic dyes. Internal Transcribed Spacers (ITS) sequencing result was confirmed as the new Basidomycetes species. HUE05-1 The optimal decolorizaton conditions were pH5, 30$^{\circ}C$ and aerobic condition. HUE05-1 was completely decolorized all dyes in both solid and liquid condition. The result is decolorization effect at Reactive Orange 16; 97.12%, Reactive Blue 19; 92.09%, Reactive Blue 49; 97.04%, Reactive Yellow 145; 95.53%, Acid Orange 10; 99.18%, Acid Violet 43; 98.73%, Acid Blue 350; 94.71%, Disperse Blue 106; 90.07%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.44-45
• /
• 2020

The purpose of this study was to contemplate the effectual waterproofing materials and construction methods for the restoration of underground infrastructures using precast arches(PC-Arch). Until now, there were no proper waterproofing guidelines for waterproofing precast arch tunnel when restoring cultural heritage or building underground infrastructures for noise control. Asphalt membrane sheets were commonly used, but the efficacy of waterproofing done on the precast segment was vulnerable. This study aims to examine the Synthetic Rubber Polymerised Gel(SRPG) proposed in ISO TR 16475, a guideline for the repair of water-leakages, and to demonstrate field applicability based on the waterproofing solution used on the road improvement project in front of Changgyeonggung Palace in Yulgok-ro, Seoul, Republic of Korea.

• 상하수도학회지
• /
• 제31권2호
• /
• pp.125-139
• /
• 2017

In this paper, the performance of a synthetic fiber filter aimed at high-speed operation and dosed with different coagulants or filter aids was investigated. Without a coagulant, the filter efficiency was about 62% which was greatly enhanced when three types of coagulants namely PAC, Alum, and $FeCl_3$ were used. Among the coagulants tested, PAC was the most effective, giving 91% filter efficiency, followed by Alum with 90%, and $FeCl_3$ with 78%. PAC worked effectively at a very small range of dose, but Alum was relatively effective in a wide range of concentration. Compared with PAC and Alum, $FeCl_3$ provided more or less contant efficiency regardless of its dose but gave the poorest filter efficiency. Moreover, as the inflow turbidity increased, headloss increased and the efficiency decreased at any dose and type of coagulant. The headloss recorded in this particular synthetic fiber filter is not significant as compared to that observed in typical granular filters. The recovery of solids estimated after filter cleaning was about 80% for both PAC and Alum, but poorer at 72% in the case of $FeCl_3$ due to the heavy and large floc characteristics. The recurrence of filter efficiency verified through repetitive filter runs was found to be satisfactory.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.270-276
• /
• 2005

This study was conducted to examine whether a specific synthetic metalworking fluid (MWF), "A", in use for 10 months without replacement, displayed microbial resistance and to identify the additives associated with the control of microbial growth. Three synthetic MWF products ("A", "B", and "C") were studied every week for two months. Microbial deterioration of the fluids was assessed through evaluation by endotoxin, bacteria and fungi levels in the MWFs. In addition, formaldehyde, boron, ethanolamine, and copper levels were also studied to determine whether they influence microbial growth in water-based MWFs. Throughout the entire study in the sump where MWF "A" was used, bacteria counts were lower than 103 CFU/mL, and endotoxins never exceeded 103 EU/mL. These levels were significantly lower than levels observed in sumps badly deteriorated with microbes. Boron levels in MWF "A" ranged from 91.7 to 129.6 ppm, which was significantly higher than boron levels found in other MWF products. The total level of ethanolamine (EA) in MWF "A" ranged from 35,595 to 57,857 ppm (average 40,903 ppm), which was over ten times higher than that found in other MWFs. Monoethanolamine (MEA), diethanolamine (DEA) and triethanolamine (TEA) concentrations in MWF "A" were also significantly higher than seen in other MWFs. However, although EA and boron might improve anti-microbial performance, their abuse can pose a serious risk to workers who handle MWFs. From an industrial hygiene perspective, our study results stress that the positive synergistic effect of boron and EA in reducing microbial activity in MWF must be balanced with the potentially negative health effects of such additives. Our study also addresses the disadvantage of failing to comprehensively report MWF additives on Material Safety Data Sheets (MSDS). Future research in MWF formulation is needed to find the best level of EA and boron for achieving optimal synergistic anti-microbial effects while minimizing employee health hazards.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1994년도 특별강연 및 추계학술발표 개요집
• /
• pp.64-67
• /
• 1994

• 한국음향학회지
• /
• 제20권6호
• /
• pp.82-86
• /
• 2001

본 논문에서는 평행한 이중 선 배열을 위한 합성 기법을 제안하고자 한다. 일반적으로 천해에서 사용되는 단일 배열은 신호의 이득을 높이고 각 분해능을 높이기 위해서 긴 어퍼쳐 길이를 요구하고 있다. 그러나 원거리로부터 발생한 극 저주파 신호는 수신단에서 어레이를 기준으로 좌, 우 모호성을 드러낸다. 이러한 문제점을 해결하기 위해 평행한 이중 선 배열을 이용하면서 합성 기법을 적용하였다. 어레이 합성 기법은 연속적인 시간에서 얻어진 각각의 데이터들을 빔 영역에서 코히어런트한 합성을 거쳐 공간 영역에서 가상의 어레이로 확장하였다. 제안된 방법은 인접한 다중 음원 환경에서의 각도 오차를 줄이고 어레이 합성 횟수에 따라 향상된 분해능성능을 나타내었다. 시뮬레이션 결과 어레이 합성 기법을 적용하기 전과 5회의 합성을 수행했을 경우, 평균 부엽 레벨은 약 7dB가 향상되었다.