• Applied Biological Chemistry
• /
• v.27 no.1
• /
• pp.34-39
• /
• 1984

Environmental effects of light. temperature, and pH of culture media on mycelial growth and fruit-body formation of Flammulina velutipes in synthetic media were investigated. Illumination inhibited mycelial growth, but illumination during the latter part of vegetative growth induced primordia formation. The optimum light intensity and exposure time were $100{\sim}1000$ lux and $4{\sim}8$ hours per day, respectively. High intensity of light was injurous, and in darkness primordia developed into very poor fruit-bodies. The optimum temperature was $25^{\circ}C for mycelial growth and $15^{\circ}C$ for fruit-body formation. The optimum pH range for mycelial growth was found to be from 5.0 to 7.0 and for fruit-body formation from 5.0 to 6.0. In low temperature treatments, a temperature of $15^{\circ}C$ was more effective than $5^{\circ}C\;or\;10^{\circ}C$, it took about 12 hours for primordium formation, but at $5^{\circ}C\;or\;10^{\circ}C$ about 48 hours. The most excellent fruit-body formation were produced from the mycelium growth for 7 to 10 days.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.33-44
• /
• 1987

To improve the ability of oxygen transfer in Biological Fluidised Bed(BFB) processes, air lift aeration system was introduced, experimental investigations were performed for the oxygen transfer in reactor, the fluidisation as to Biomass Volatile Solids variation and the relationship between substrate removal rate and oxygen utilization. The experiments for this purpose were executed for the synthetic wastewater by continuous type reactor at $20^{\circ}C$ using reticulated polypropylene sheets as media. The obtained results showed that the oxygen transfer by air lift aeration would be more effective than any other aeration systems used in BFB reactor. Also, it has observed that the critical biomass concentration in reactor took a range of 20 to 23g/l. Applying cages to BFB reactor, biomass would be maintained uniformly in the bed and the fluidisation characteristics of media could be improved. Varying F/M ratio from 0.36 to 0.73, BOD removals were 91% or more. Therefore, this process was suited to the treatment of which F/M ratios are variable and specific oxygen uptake rates ($K_r$) were 0.23 to 0.26g $O_2/g\;VSS{\cdot}day$ at range of 15 to 20g BVS/l.

• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.259-270
• /
• 2017

In this study, field-scale half-saturated bio-filter wetland equipped with recirculation system was operated with stormwater from the paved road, and its operational performance and functions of LID-BMP were analyzed and compared with other facilities. The reduction of TSS, COD, TN, and TP were 92%, 63%, 36%, and 75%, respectively. Comparison of the reduction efficiency were carried out with respect to ratio between surface and catchment areas(SA/CA). In addition, this LID-BMP facility can reduce about 70% of pollutant by treating only 18% of total rainfall runoff. The results show that LID used for this study gave similar efficiency although its ratio was smaller. In addition, comparison study was made between synthetic fiber as a filter media and organic media, which shows that there was not any significant difference between, TSS and TP reduction, but there were large difference in COD and TN removal due to the presence and absence of release of organic carbon. Meanwhile, wetland system in this study equipped with a first-flush capture gave a higher stability in terms of treatment performance.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.703-713
• /
• 2020

In many geological fields, including hydrogeology, it is of great importance to determine the heterogeneity of the subsurface media. This study briefly introduces the concept and theory of the method that can estimate the hydraulic properties of the media constituting the aquifer, which was recently introduced by Park (2020). After the introduction, the method was applied to the synthetic aquifer to demonstrate the practicality, from which various implications were drawn. The introduced technique uses a global optimization technique called the covariance matrix adaptation evolution strategy (CMA-ES). Conceptually, it is a methodology to characterize the aquifer heterogeneity by assimilating the groundwater level time-series data due to the imposed hydraulic stress. As a result of applying the developed technique to estimate the hydraulic conductivity of a hypothetical aquifer, it was confirmed that a total of 40000 unknown values were estimated in an affordable computational time. In addition, the results of the estimates showed a close numerical and structural similarity to the reference hydraulic conductivity field, confirming that the quality of the estimation by the proposed method is high. In this study, the developed method was applied to a limited case, but it is expected that it can be applied to a wider variety of cases through additional development of the method. The development technique has the potential to be applied not only to the field of hydrogeology, but also to various fields of geology and geophysics. Further development of the method is currently underway.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.331-340
• /
• 2000

The existing two-phase biological fluidized bed has some problems such as limit of oxygen transfer and blockade of fluidized distributor. In this study, three-phase swirl flow biological fluidized bed has designed to solve the problems and to investigate its running characteristics. TOC of influent synthetic wastewater was approximately $70mg/{\ell}$. HRT of reactor was 1.6 hours. Mean particle size of sand, as packing media, was 0.397mm and packing volume was varied from $200m{\ell}/{\ell}$ to $600m{\ell}/{\ell}$ by stages in the bed. The amount of biomass and effluent water quality was throughly investigated in the bed. Showing experiment results from the above conditions, it was possible to solve the problems of existing fluidized bed and to keep DO of $3mg/{\ell}$ or more. And it was also TOC removal rate of 91 to 94 %, MLVSS of 2,360 to $3,860mg/{\ell}$, MLVSS per g-media of 8.4 to 17.3 mg/g, F/M ratio of 0.59 to $1.04kg-TOC/kg-MLVSS{\cdot}day$, biofilm thickness of $35{\sim}71{\mu}m$ and sludge productivity of 1.03 to $2.35kg-SS/m^3{\cdot}day$. Optimal conditions in this experimental were as follows.; those were biofilm thickness of approximately $54{\mu}m$. MLVSS per g-media of 13 mg and media packing volume of 350 to $400m{\ell}/{\ell}$ when F/M ratio was low, treatment efficiency was high and sludge productivity was low. Showing the media with optics microscope in this optimal condition, attached microbes such as Epistylis sp. were observed. From SEM photographs, it showed that Coccus adhere to and grow on the media surface.

• Journal of Wetlands Research
• /
• v.23 no.1
• /
• pp.94-105
• /
• 2021

Two vertical flow biofilters in series (BFS) employing synthetic fiber (FBF) followed by woodchip (WBF) was investigated in order to assess its potential as an alternative to the typical vertical-horizontal flow configuration in removing nonpoint source pollutants specifically nutrients and organics. These lab-scale column biofilters were operated for 176 days alongside three other columns that were added for control and sampling purposes. The biofilter columns were fed with either a semi-artificial piggery stormwater or artificial stormwater with specific ammonia and nitrate contents. Results reveal that the BFS was more effective than a single biofilter in removing pollutants especially nitrogen. FBF was found to remove up to 100% of ammonia from the stormwater with corresponding increase in nitrate in the outflow which shows evidence of active nitrification. Meanwhile, the succeeding vertical WBF was able to subsequently remove 77% of the nitrate. The effective reduction of nitrate in a vertical flow biofilter was believed to be due to the use of woodchip which can provide a carbon source that is required for denitrification. However, further investigation is needed to support this claim. Nonetheless, the study shows the potential of vertical flow BFS as a nitrogen removal mechanism especially in areas where enough land space for horizontal flow biofilters is limited.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.495-499
• /
• 2006

In our previous studies, we demonstrated that Vascular Endothelial Growth Factor (VEGF) enhances bovine oocyte maturation and early embryonic development in serum supplemented media. In this experiment, to determine the synergistic effect of VEGF with serum components on early embryonic development in vitro in cattle, 1 mg/ml polyvinyl-alcohol (PVA) was replaced with foetal bovine serum (FBS) in maturation and culture media. Bovine oocytes were matured in Synthetic Oviduct Fluid (SOF) supplemented with PVA, PVA+5 ng/ml of VEGF, FBS, or FBS+VEGF. Fertilized oocytes were cultured in the same conditions for 8 days. The development of embryos was examined at 48 h post- insemination and on days 6, 7 and 8. The results were analyzed using repeated measures two- factor ANOVA, in which the effects of VEGF and serum were assigned as two factors. The development rate to 4- to 8-cell embryos at 48 h was significantly higher in the PVA+VEGF group than in the PVA group (44.7% and 31.5%, respectively). However, the highest development rate to 4- to 8-cell embryos was obtained from the FBS+VEGF group (58.8%). On day 8, the blastocyst rates were higher in the PVA+VEGF (22.8%), FBS (32.1%, p<0.05) and FBS+VEGF (42.1%, p<0.05) groups than in the PVA group (17.1%). Two- factor ANOVA of the development rates indicates that VEGF had a significant effect, but had no synergistic effect with serum components on early embryonic development. The results of the present study demonstrate that VEGF improves the in vitro developmental competence of bovine oocytes and/or embryos independent of the effect of serum components.

• Journal of Environmental Science International
• /
• v.15 no.6
• /
• pp.513-525
• /
• 2006

In recent decades, biofiltration has been widely accepted for the treatment of contaminated air stream containing low concentration of odorous compounds or volatile organic compounds (VOCs). In this study, conventional biofilters packed with flexible synthetic polyurethane (PU) foam carriers were operated to remove toluene from a contaminated air stream. PU foams containing various amounts of pulverized activated carbon (PAC) were synthesized for the biofilter media and tested for toluene removal. Four biofilter columns were operated for 60 days to remove gaseous toluene from a contaminated air stream. During the biofiltration experiment, inlet toluene concentration was in the range of 0-150 ppm and EBRT (i.e., empty bed residence time) was kept at 26-42 seconds. Pressure drop of the biofilter bed was less than 3 mm $H_2O/m$ filter bed. The maximum removal capacity of toluene in the biofilters packed with PU-PAC foam was in the order of column II (PAC=7.08%) > column III (PAC=8.97%) > column I (PAC=4.95%) > column IV (PAC=13.52%), while the complete removal capacity was in the order of column II > column I > column III > column IV. The better biofiltration performance in column II was attributed to higher porosity providing favorable conditions for microbial growth. The results of biodegradation kinetic analysis showed that PU-PAC foam with 7.08% of PAC content had higher maximum removal rate ($V_m$=14.99 g toluene/kg dry material/day) than the other PU-PAC foams. In overall, the performance of biofiltration might be affected by the structure and physicochemical properties of PU foam induced by PAC content.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.176-187
• /
• 2000

MPEG-4 is a digital bit stream format and associated protocols for representing multimedia content consisting of natural and synthetic audio, video and object data. This paper describes an application where multiple audio/visual data stream are combined in MPEG-4 and transported via MPTG-2 transport streams(TS). Also, this paper describes how to convert MPEG-4 Over MPEG-2 TS bit streams into MP4 file which Is designed to contain the media information of an MPEG-4 presentation in a flexible, extensible format. MPEG-4 is presented in the form of audio-visual objects that are arranged into an audio-visual scene by means of a scene descriptor and is composed of the audio-visual objects by means of an object descriptor. These descriptor streams are not defined MPEG-2 TS. So. this paper focuses on handling of these descriptors and parsing TS streams to get MPEG-4 data. The MPEG-4 Over MPEG-2 TS to MP4 format converter is implemented in the demonstrated systems.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.3
• /
• pp.360-367
• /
• 2006

The endoinulinase gene (inu1) from Pseudomonas mucidolens was expressed on the cell surface of Saccharomyces cerevisiae by fusing with Aga2p linked to the membrane anchored protein, Aga1p. The inu1 gene of P. mucidolens was subcloned into the surface display vector, pCTcon (GAL1 promoter). The constructed plasmid, pCTENIU (8.5kb), was then introduced to S. cerevisiae EBY100 cells and the yeast transformants selected on synthetic defined media lacking uracil and inulin-containing media. The inu1 gene under the control of the GAL1 promoter was successfully expressed in the yeast transformants, and the surface display of endoinulinase confirmed by immunofluorescence microscopy, along with its enzymatic ability to form inulooligosaccharides (IOSs) from inulin. The total endoinulinase activity reached about 2.31 units/ml when the yeast transform ants were cultivated on a YPDG medium. To efficiently hydrolyze the inulin, various reaction conditions were examined, including the pH, temperature, and inulin source. The optimized conditions were then determined as follows: pH, 7.0; temperature, $50^{\circ}C$; inulin source, Jerusalem artichoke. Under the optimized condition and 46 units of endoinulinase per g of inulin, IOSs started to be produced after 10 min of enzymatic reaction. The highest yield, 71.2% of IOSs, was achieved after 30 h of reaction without any significant loss of the initial enzyme activity. As a result of the reaction with inulin, IOSs consisting of inulobiose (F2), inulotriose (F3), inulotetraose (F4), and inulopentaose (F5) were produced, and F4 was the major product.