• 대한환경공학회지
• /
• 제34권10호
• /
• pp.694-701
• /
• 2012

본 연구는 여재를 장착한 수리동역학적 여과분리장치(HSF)와 태양전지 구동형 수중펌프를 조합한 장치의 여재 역세척 가능성에 대하여 분석하였다. 수중펌프는 12볼트 직류모터로 구동되며 태양전지와 축전지로 가동된다. 수리동력학적 분리장치와 펄라이트 여재를 충진한 카트리지에 역세척용 노즐을 장착하였다. 입자물질들은 인공입자들을 이용하여 강우유출수내 입자농도를 모의 실험하였다. 인공입자들을 물에 분산시켜 강우유출수를 재현하였는데 사용한 입자들은 이온교환수지 입자, 실리카젤 입자, 그리고 상업지역 맨홀퇴적물질 입자 등이다. HSF장치는 아크릴 수지를 이용하였는데 여과조의 직경은 250 mm이고 전체적인 높이는 800 mm로 제작하였다. 유입수 SS 농도와 입경, 다양한 수면적 변화를 변화에 대한 역세척 방법별 SS 처리효율을 산정하였다. 전체적인 수면적부하율 범위는 308~$1,250m^3/m^2/day$이다. 태양전지를 이용한 최소한의 전력으로 구동되는 펌프를 이용하여 역세척을 실시한 결과 2대의 수중 펌프를 가동하여 역세척 시 역세척하지 않은 여재와 비교하여 약 18% 처리효율 증가효과를 나타내었다. 비점오염 처리장치에 소규모 태양전지를 활용하여 여재를 역세척할 경우 처리효율을 향상시킬 수 있을 것으로 판단된다.

• KSBB Journal
• /
• 제10권3호
• /
• pp.241-248
• /
• 1995

염색가공 폐수 중 난분해성 물질이 PYA를 처리 하기 위하여, 한천-acrylamide를 이용한 bead를 제 조한 후 air-lift 반응기에서 연속실험을 행하였다. 합성폐수의 PYA놓도가 $3,100mg/\ell$. 체류시간 24hr일 때 유출수의 농도는 $4500mg/\ell$ 이며, 제거효율은 85% 이상을 나타내었다. 실제 호발폐수의 경우 PYA 및 COD농도가 $3,253mg/\ell$, $4,500mg/\ell$일 때, 체류시간 24hr에서 유출수의 농도는 $840mg/\ell, 480mg/\ell$이며, 제거효 율은 81.3%와 85.2%로 각각 나타났다. bead의 지름이 lmm일 때는 내부의 미생물 성장 이 양호하였으나 bead의 지름이 2mm일 때는 기질 과 산소전달저항에 의하여 반지름의 48% 이상은 미 생물의 성장이 저해를 받았다. 고정화 반응기에서 전체 기질 제거속도 중 bead 내 고정화 cell의 제거 분율은 평균 70%로 나타났다. 현탁 반응기에서 희석율 $0.083hr^{-1}$ 이상에서는 기질 이용속도가 감소하였으나 고정화 반응기에서는 희석율 $0.125hr^{-1}$까지 거의 선형척으로 증가하였다. PYA 제거속도식에서 포화상수 $K_s=6.60(g PVA/\ell)$와 최대 비기질 이용속도 k=0.175(g PVA/g cell.hr)를 얻었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.98-103
• /
• 2001

부산 석대 생활폐기물 매립지의 환경오염 특성을 파악하기 위해 매립장 지역의 가스발생량 측정, 침출수 및 토양시료 채취, 지구통계학적, 수리지질학적 및 지구화학적 분석과 실내 주상시험을 실시하여, 침출수의 오염 부하량과 가스발생량, 가스의 농도와 지반 침하, 지질매체의 특성, 침출수의 오염 부하량과 가스발생량, 가스의 농도와 지반 침하, 지질매체의 특성, 침출수의 이동 및 확산의 관계를 고찰하였다. 그리고 물수지분석을 통하여 침출수의 발생량과 오염 부하량을 선정하였다. 매립장 A지구로부터 36개 가스정에서 획득한 가스자료를 $O_2$C $H_4$ $H_2$S, CO의 4가지 성분에 대해 지구통계학적 기법으로 분석한 결과, 다른 지점에 비해 가스의 농도가 높은 지점 주변에서 부분적으로 지반 침하가 발생하는 것으로 나타났다. Leachate-1, 2, 3에서 채취한 침출수의 화학적 분석 결과, 전기전도도와 Total Alkalinity는 높게 나타났으나, Cl, Cr, Mn, Cu, Zn, Cd, Pb 등이 과거보다 감소하였고, 수질유형은 삼각다이아그램에서 Na-HC $O_3$형으로 나타난다. Leachate-1, 2, 3에서 채취한 침출수의 화학적 분석 결과 전기전도도와 Total Alkalinity는 다이아그램에서 Na-HC $O_3$형으로 나타난다. 수질분석 결과에 의하면 생활폐기물의 생분해가 아직도 계속해서 활발히 진행되고 있는 것으로 판단된다. 물수지분석 결과, 순수하게 지하로 침투하는 침출수량은 약 465.11㎥/day이고, Cl, Mn, Fe의 순수오염 부하량은 각각 223.8kg/day, 0.2kg/day, 0.3kg/day로 추정된다. 매질에 대한 실내 주상시험에서 기반암 풍화토와 매립토에 대한 선형유속(equation omitted)은 각각 0.206cm, 0.019cm, 확산계수( $D_{ι}$)는 각각 0.234$\textrm{cm}^2$/min, 0.118$\textrm{cm}^2$/min, 종분산 지수 ($\alpha$$_{ι}$)는 각각 1.136cm, 0.095cm로 복토재로 사용된 매립토보다 기반암풍화토가 오염물질의 확산속도가 더 큰 것으로 나타났다.

• Environmental Engineering Research
• /
• 제12권1호
• /
• pp.8-15
• /
• 2007

Two phase UASB reactors for treating wastewater with sulfate were operated to assess the performance and competition of organics between sulfate reducing bacteria(SRB) and methane producing bacteria(MPB), and the change of characteristics of microorganisms. The reactors were fed in parallel with a synthetic wastewater of 4,000-5,000 mgCOD/L and sulfate concentration of $800-1,000\;mgSO_4/L$. In the MPR(methane producing reactor) and CR(control reactor), COD removal efficiencies were 90% and 60%, respectively, at the OLR(organic loading rate) of 6 gCOD/L, while the amount of biogas and methane content were 6.5 L/day and 80%, and 3 L/day and 50%, respectively. However, the portion of electron flow used by SRB at the OLR of 6 gCOD/L day in MPR and CR was 3% and 26%, respectively. This indicated that the increase of OLR of wastewater containing high sulfate like CR resulted in activity decrease and cell decay of MPB, while SRB was adapted immediately to new environment. The MPB activities in MPR and CR were 2 and $0.38\;kgCH_4-COD$/gVSS day at the OLR of 6 gCOD/L. This indicated hat SRB dominated gradually over MPB during long-term operation with wastewater containing sulfate as a consequence of outcompeting of SRB over MPB. In addition, the solution within AFR was maintained around pH 5.0, the MPB such as Methanothrix spp. which was very important to formation of granules was detached from the surface of granules due to the decrease of activity by limitation of substrate transportation into MPB. Therefore, a significant amount of sludge was washed out from the reactor.

• Structural Engineering and Mechanics
• /
• 제53권4호
• /
• pp.791-818
• /
• 2015

RC buildings constitute the prevailing type of construction in earthquake-prone region like Kathmandu Valley. Most of these building constructions were based on conventional methods. In this context, the present paper studied the seismic behaviour of existing RC buildings in Kathmandu Valley. For this, four representative building structures with different design and construction, namely a building: (a) representing the non-engineered construction (RC1 and RC2) and (b) engineered construction (RC3 and RC4) has been selected for analysis. The dynamic properties of the case study building models are analyzed and the corresponding interaction with seismic action is studied by means of non-linear analyses. The structural response measures such as capacity curve, inter-storey drift and the effect of geometric non-linearities are evaluated for the two orthogonal directions. The effect of plan and vertical irregularity on the performance of the structures was studied by comparing the results of two engineered buildings. This was achieved through non-linear dynamic analysis with a synthetic earthquake subjected to X, Y and $45^{\circ}$ loading directions. The nature of the capacity curve represents the strong impact of the P-delta effect, leading to a reduction of the global lateral stiffness and reducing the strength of the structure. The non-engineered structures experience inter-storey drift demands higher than the engineered building models. Moreover, these buildings have very low lateral resistant, lesser the stiffness and limited ductility. Finally, a seismic safety assessment is performed based on the proposed drift limits. Result indicates that most of the existing buildings in Nepal exhibit inadequate seismic performance.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.343-346
• /
• 2000

본 BAF 반응기 연구에서의 C/N비의 증가는 산소의 친화도가 큰 호기성 종속영양 미생물에게 유리한 조건을 형성하여 질산화의 효율을 감소시켰으나 공기양의 증가로 인해 질산화 미생물의 활성도는 다시 증가하였다. 총 질소의 제거율은 동일한 C/N비에서 공기량을 증가하여 많은 양의 암모니아성 질소가 질산성 질소로 산화될 때 증가하였으며 이 결과는 무산소조에서 많은 다공성의 여재에 미생물이 두꺼운 생물막을 형성하여 생물막 안쪽으로 용존산소가 쉽게 전달되지 않아 탈질에 큰 영향을 미치지 않은 결과라고 볼 수 있다.

• 한국환경과학회지
• /
• 제13권3호
• /
• pp.245-250
• /
• 2004

The SBR(Sequencing Batch Reactor) process is ideally suited to treat high loading wastewater due to its high dilution rate. SBR operates by a cycle of periods consisting of filling, reacting, settling, decanting and idling. The react phases such as aeration or non-aeration, organic oxidation, nitrification, denitrification and other bio-logical reactions can be achieved in a reactor. Although the whole reactions can be achieved in a SBR with time distributing, it is hard to manage the SBR as a normal condition without recognizing a present state. The present state can be observed with nutrient sensors such as ${NH_{4}}^{+}-N$, ${NO_{2}}^{-}-N$, ${NO_{3}}^{-}-N} and ${PO_{4}}^{ 3-}-P.$ However, there is still a disadvantage to use the nutrient sensors because of their high expense and inconvenience to manage. Therefore, it is very useful to use common on-line sensors such as DO, ORP and pH, which are less expensive and more convient. Moreover, the present states and unexpected changes of SBR might be predicted by using of them. This study was conducted to get basic materials for making an inference of SBR process from ORP(oxidation reduction potential) of synthetic wastewater. The profiles of ORP, DO, and pH were under normal nitrification and denitrification were obtained to compare abnormal condition. And also, nitrite and nitrate accumulation were investigated during reaction of SBR. The bending point on ORP profile was not entirely in the low COD/NOx ratio condition. In this case, NOx was not entirely removed, and minimum ORP value was presented over -300mV. Under suitable COD/NOx ratio which complete denitrification was achieved, ORP bending point was observed and minimum ORP value was under -300m V. Under high COD/NOx ratio, ORP bending point was not detected at the first subcycle because of the fast denitrification and minimum ORP value was under -300mV at the time.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.309-316
• /
• 2011

일반적으로 카누는 목재나 FRP 등으로 제작된다. 그러나 소비자들은 기존의 재료에 비하여 염가이면서 친환경 재료를 선호한다. 특히, 선진국에서는 일부 선박에 대하여 FRP 선체 제조를 금지하는 법안을 발표하고 이에 따른 국제협약을 제정하였다. 폴리에틸렌은 식료품 용기나 의료용 용기로 널리 사용되는 재료로서 리사이클 가능한 재료이다. 본 연구에서는 카누 선체 재료로 폴리에틸렌으로 선정하였으며 선형설계는 상용 선형 설계 프로그램인 3D Boat Design을 이용하여 수행하였다. 카누 구조하중은 우선 ANSYS CFX R12.1을 이용하여 선체에 작용되는 압력 분포를 구하고 이것을 ANSYS WORKBENCH R12.1로 넘겨 선체 압력 하중과 패들러 하중을 동시에 고려하였다. 카누 각 치수를 설계변수화하여 응력과 무게를 최소화하는 최적화 과정을 반응표면방법과 만족도 함수를 이용하여 수행하였다. 개발된 카누는 운항시험에서 직진성이나 안정성은 우수하나 운반성과 선회성 및 속도는 보통인 것으로 판단된다.

• Biomolecules & Therapeutics
• /
• 제19권3호
• /
• pp.357-363
• /
• 2011

In relieving local pains, ropivacaine has been widely used. In case of their application such as ointments and creams, it is difficult to expect their effects for a significant period of time, because they are easily removed by wetting, movement and contacting. Therefore, the new formulations that have suitable bioadhesion were needed to enhance local anesthetic effects. The effect of drug concentration and temperature on drug release was studied from the prepared 1.5% Carboxymethyl cellulose (CMC) (150MC) gels using synthetic cellulose membrane at $37{\pm}0.5^{\circ}C$. As the drug concentration and temperature increased, the drug release increased. A linear relationship was observed between the logarithm of the permeability coefficient and the reciprocal temperature. The activation energy of drug permeation was 3.16 kcal/mol for a 1.5% loading dose. To increase the skin permeation of ropivacaine from CMC gel, enhancers such as saturated and unsaturated fatty acids, pyrrolidones, propylene glycol derivatives, glycerides, and non-ionic surfactants were incorporated into the ropivacaine-CMC gels. Among the enhancers used, polyoxyethylene 2-oleyl ether showed the highest enhancing effects. For the efficacy study, the anesthetic action of the formulated ropivacaine gel containing an enhancer and vasoconstrictor was evaluated with the tail-flick analgesimeter. According to the rat tail-flick test, 1.5% drug gels containing polyoxyethylene 2-oleyl ether and tetrahydrozoline showed the best prolonged local analgesic effects. In conclusion, the enhanced local anesthetic gels containing penetration enhancer and vasoconstrictor could be developed using the bioadhesive polymer.

• Journal of Pharmaceutical Investigation
• /
• 제28권3호
• /
• pp.177-183
• /
• 1998

Low toxicity, reverse thermal gelation and high drug loading capabilities suggest that poloxamer 407 gels have great potential as a topical drug delivery system. Kojic acid (KA) is an antimelanogenic agent which has been widely used in cosmetics to whiten the skin color. However, it has the drawbacks of skin irritancy due to its acidic pH. Poloxamer gels of different polymer contents were formulated to overcome the problem and compared to the cream type formulations of either w/o/w multiple emulsion cream or o/w type emulsion cream. Using Franz diffusion cells mounted with a synthetic cellulose membrane (MWCO 12,000), drug release characteristics of the formulations were evaluated by the HPLC assay of KA concentration in the receptor compartment of pH 7.4 phosphate buffered saline solutions. Drug release from w/o/w multiple emulsion cream was controlled by oil membrane, showing the apparent zero order release kinetics. The KA release from the poloxamer gels was also controlled by the gel matrix, showing that drug release increased linearly as KA contents increase, but decreased exponentially as the polymer contents increase. In the skin irritancy test, the primary irritancy index(PII) of poloxamer gel base was lower than those of multiple emulsion cream base and o/w cream. Depending on KA contents or polymer contents in the gel. PH values in poloxamer gels were ranged from 1.3 to 2.0, which are interpreted as low or negligible irritation on skin. There was a good correlation between the log value of flux in drug release and PII value in skin irritation. It was possible to conclude that the poloxamer gels containing KA might be a good candidate for an antimelanogenic topical delivery system by virtue of the controlled release of the drug and the reduced skin irritancy.