• 한국농공학회지
• /
• 제41권3호
• /
• pp.59-65
• /
• 1999

This study has been performed to confirm the three dimensional effect of the crack reduction and the restrained effect of crack growth for the synthetic fiber reinforced soil. Two types of polyrpropylene fiber and low plastic clay(CL) were used for the test. And the test variable were fiber length and so on. The results of the study were summarized as follows ; 1) The mixing of synthetic fiber was effective in reducing crack growth due to adhesion between soil partlcles and synthetic fiber.l Especially initlal crack was delayed, as compared with the pure soil, for about 1 day in case of mono filament synthetic fiber and for about 1 or 2 days in case of fibrillated syntetic fiber. 2) As the content and length of synthetic fiber were increased , the effect of crack reduction was increased. It was found that 0.5% fibrillated synthetic fiber with 40mm length reinforced soil had about 3 times more effective than natural soils. 3) In case of the same fiber content and fiber length, the fibrillated synthetic fiber has nmore effective than the mono filament synthetic fiber for crack reduction.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.431-437
• /
• 1998

This study was performed to ascertain the three-dimensional effect of the crack reduction and the restrained effect of crack growth, and to yield a suitable mixing ratio of the synthetic fiber reinforced soil. The results of the study are as follows ; 1) The synthetic fiber has the resisting force for crack because of the adhesion due to the attraction of soil particles. 2) As the synthetic fiber length and the mixing ratio are increased, mono filament synthetic fiber reinforced soil is increased the effects of crack reduction and the restraint of crack growth. 3) The fibrillated synthetic fiber is more effective than mono filament synthetic fiber for crack. 4) A suitable mixing ratio of synthetic fiber reinforced soil is 0.5% of the fibrillated synthetic fiber.

• 콘크리트학회논문집
• /
• 제23권4호
• /
• pp.461-469
• /
• 2011

이 연구에서는 하이브리드 구조용 합성 섬유와 폴리비닐알코올(PVA)섬유 보강 시멘트 복합 재료에 정착된 구조용 합성 섬유의 인발 거동에 미치는 PVA 섬유 혼입률의 효과를 제시하였다. 구조용 합성 섬유와 하이브리드 섬유보강 시멘트 복합 재료와의 인발 거동은 Dog-bone 부착 시험에 의해서 결정하였다. 시험 결과 PVA 섬유의 혼입은 구조용 합성 섬유와 시멘트 복합 재료와의 인발 거동 특히, 섬유 계면인성을 강화하는 효과가 있었다. 구조용 합성 섬유의 인발 시험 결과 구조용 합성 섬유와 시멘트 복합 재료와의 계면인성은 PVA 섬유의 혼입률이 증가할수록 증가하였다. 미세 구조 분석 결과 PVA 섬유의 혼합은 구조용 합성 섬유와 PVA 섬유 보강 시멘트 복합 재료의 계면인성 메커니즘을 강화시키는데 효과적이라는 것을 확인할 수 있었다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.582-587
• /
• 1999

This study has been done to investigate the characteristics of synthetic fiber reinforcement sol with fully satruated . To this end, consolidated undrained triaxial test was performed on synthetic fiber reinforcement soil using the soft clay and plypropylene fiber . From the results of test, it was formed that the mixing ratio for weight and the aspect ratio of synthetic fiber have an effect on the shear characteristic of synthetic fiber rinforcement soil. Especially shear paramter C has line relationship for mixing ratio of fiber, and øhas parabolic relationship for mixing ratio of fiber.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.335-340
• /
• 2001

Recently in abroad, structural synthetic fiber developed, has been studied extensively as a substitute for steel fiber due to its properties such as corrosion-resistance, low density, good pumping, and in-place safety, etc. In this study, we conducted pull-out test, for seven different geometries of structural synthetic fibers and obtained optimum geometry for structural synthetic fiber which fully utilizes matrix anchoring without revealing fiber fracturing. According to pull-out test results, it was found that crimped type structural synthetic fiber give significant improvement in the interface toughness(roll-out enemy) and pull-out load.

• 한국고분자학회지:고분자과학과기술
• /
• 제8권5호
• /
• pp.546-554
• /
• 1997

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.373-378
• /
• 2003

The cement-based composites have relatively low tensile strength and toughness. The fiber addition is one of the most important ways of increasing the toughness of concrete. The steel fibers have been used conventionally in the shotcrete of tunnel lining. Recently, the structural synthetic fibers were developed and used frequently in some actual tunnel shotcreting in foreign countries. Now types of synthetic fibers have been developed in this study. The purpose of this study is to explore the strength and toughness characteristic of the concrete reinforced with synthetic fibers developed in this study. The result were compared with those of steel fiber reinforced concrete. It is seen that the performance of synthetic fiber reinforced concrete is good as much as that of steel fiber reinforced concrete, while the synthetic fibers have advantages in corrsion resistance and economy.

• 대한토목학회논문집
• /
• 제31권2A호
• /
• pp.137-143
• /
• 2011

본 연구는 섬유보강 시멘트 모르타르에서 무수말레인산이 그라프트된 폴리프로필렌(maleic anhydride grafted polypropylene, mPP) 분말의 첨가가 무극성 마크로 합성섬유(마크로 합성섬유)의 부착특성에 미치는 효과를 평가하였다. 다양한 mPP의 첨가율(시멘트 중량의 0%, 5%, 10%, 15%, 20%, 25%, 30%)에 따른 시멘트 모르타르와 마크로 합성섬유의 부착거동을 평가하기 위하여 Dog-bone 부착시험을 수행하였다. 시멘트 모르타르내에서 마크로 합성섬유의 부착 특성(일반거동, 인발하중 및 계면인성)은 mPP의 사용량 증가할수록 증가하였다. 인발시험 후 마크로 합성섬유 표면의 미세구조 분석은 mPP의 첨가율에 따른 마찰 저항력을 평가하기 위하여 관찰하였다. mPP의 첨가율이 증가할수록 마크로 합성섬유 표면에 긁힘 현상이 증가하였다.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.29-43
• /
• 2017

This study investigates the blast resistance of fiber-reinforced cementitious composite (FRCC) panels, with fiber volume fractions of 2%, subjected to contact explosions using an emulsion explosive. A number of FRCC panels with five different fiber mixtures (i.e., micro polyvinyl alcohol fiber, micro polyethylene fiber, macro hooked-end steel fiber, micro polyvinyl alcohol fiber with macro hooked-end steel fiber, and micro polyethylene fiber with macro hooked-end steel fiber) were fabricated and tested. In addition, the blast resistance of plain panels (i.e., non-fiber-reinforced high strength concrete, and non-fiber-reinforced cementitious composites) were examined for comparison with those of the FRCC panels. The resistance of the panels to spall failure improved with the addition of micro synthetic fibers and/or macro hooked-end steel fibers as compared to those of the plain panels. The fracture energy of the FRCC panels was significantly higher than that of the plain panels, which reduced the local damage experienced by the FRCCs. The cracks on the back side of the micro synthetic fiber-reinforced panel due to contact explosions were greatly controlled compared to the macro hooked-end steel fiber-reinforced panel. However, the blast resistance of the macro hooked-end steel fiber-reinforced panel was improved by hybrid with micro synthetic fibers.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권4호
• /
• pp.125-135
• /
• 2011

폴리프로필렌섬유보강 시멘트 복합재료와 구조용 합성섬유의 부착특성을 평가하였다. 폴리프로필렌섬유는 0.10%, 0.15% 및 0.20%의 체적비로 적용하여 dog-bone 시험을 실시하였다. 구조용 합성섬유와 폴리프로필렌섬유보강 시멘트 복합재료 사이의 부착강도는 폴리프로필렌섬유의 혼입률이 증가할수록 증가하였으나 0.20% 이상이 되면 감소하였다. 또한 폴리프로필렌섬유의 첨가는 계면인성과 마찰저항을 증가시킨다. 인발시험 후 구조용 합성섬유 표면의 미소구조 분석은 폴리프로필렌섬유의 혼입률이 증가할수록 긁힘 현상이 증가하였다.