• 제목/요약/키워드: Synthetic Bandwidth

Search Result 46, Processing Time 0.026 seconds

Coherent Pulse Train Based Velocity Estimation and Compensation for High Resolution Range Profile of Moving Target in Stepped Frequency Radar (계단 주파수 레이더에서 이동표적의 고해상도 거리 추정을 위한 코히어런트 펄스열 기반의 속도 추정 및 보상)

  • Sim, Jae-Hun;Bae, Keun-Sung
    • Journal of IKEEE
    • /
    • v.22 no.2
    • /
    • pp.309-315
    • /
    • 2018
  • A Stepped Frequency Radar(SFR) is a method of achieving high range resolution by gradually increasing the frequency of a transmitted pulse to create a wide synthetic bandwidth. However, in the case of moving target, accurate range estimation can not be performed due to the range-Doppler coupling phenomenon, so it is necessary to compensate through accurate velocity estimation. In this paper, we propose a stepped frequency radar waveform with a Coherent Pulse Train(CPT), velocity estimation results according to parameters using this method and VMD(Velocity Measurement Data) were compared and analyzed by numerical simulations.

A comparison of CPP analysis among breathiness ranks (기식 등급에 따른 CPP (Cepstral Peak Prominence) 분석 비교)

  • Kang, Youngae;Koo, Bonseok;Jo, Cheolwoo
    • Phonetics and Speech Sciences
    • /
    • v.7 no.1
    • /
    • pp.21-26
    • /
    • 2015
  • The aim of this study is to synthesize pathological breathy voice and to make a cepstral peak prominence (CPP) table following breathiness ranks by cepstral analysis to supplement reliability of the perceptual auditory judgment task. KlattGrid synthesizer included in Praat was used. Synthesis parameters consist of two groups, i.e., constants and variables. Constant parameters are pitch, amplitude, flutter, open phase, oral formant and bandwidth. Variable parameters are breathiness (BR), aspiration amplitude (AH), and spectral tilt (TL). Five hundred sixty samples of synthetic breathy vowel /a/ for male were created. Three raters participated in ranking of the breathiness. 217 were proved to be inadequate samples from perceptual judgment and cepstral analysis. Finally, 343 samples were selected. These CPP values and other related parameters from cepstral analysis are classified under four breathiness ranks (B0~B3). The mean and standard deviation of CPP is $16.10{\pm}1.15$ dB(B0), $13.68{\pm}1.34$ dB(B1), $10.97{\pm}1.41$ dB(B2), and $3.03{\pm}4.07$ dB(B3). The value of CPP decreases toward the severe group of breathiness because there is a lot of noise and a small quantity of harmonics.

Efficient Tracking of Speech Formant Using Closed Phase WRLS-VFF-VT Algorithm

  • Lee, Kyo-Sik;Park, Kyu-Sik
    • The Journal of the Acoustical Society of Korea
    • /
    • v.19 no.2E
    • /
    • pp.8-13
    • /
    • 2000
  • In this paper, we present an adaptive formant tracking algorithm for speech using closed phase WRLS-VFF-VT method. The pitch synchronous closed phase methods is known to give more accurate estimates of the vocal tract parameters than the pitch asynchronous method. However the use of a pitch-synchronous closed phase analysis method has been limited due to difficulties associated with the task of accurately isolating the closed phase region in successive periods of speech. Therefore we have implemented the pitch synchronous closed phase WRLS-VFF-VT algorithm for speech analysis, especially for formant tracking. The proposed algorithm with the variable threshold(VT) can provide a superior performance in the boundary of phone and voiced/unvoiced sound. The proposed method is experimentally compared with the other method such as two channel CPC method by using synthetic waveform and real speech data. From the experimental results, we found that the block data processing techniques, such as the two-channel CPC, gave reasonable estimates of the formant/antiformant. However, the data windows used by these methods included the effects of the periodic excitation pulses, which affected the accuracy of the estimated formants. On the other hand the proposed WRLS-VFF-VT method, which eliminated the influence of the pulse excitation by using an input estimation as part of the algorithm, gave very accurate formant/bandwidth estimates and good spectral matching.

  • PDF

A Study on Joint ATR-Compression System Design Algorithm for Integrated Target Detection (목표물 탐지를 고려한 자동탐색기능 압축시스템 설계 알고리듬에 관한 연구)

  • 남진우
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.2 no.1
    • /
    • pp.12-18
    • /
    • 2001
  • SAR radar and FLIR images, which are taken from sensors on aircrafts or satellites, are compressed prior to transmission to facilitate rapid transfer through the limited bandwidth channels. In this case, it is important that it achieves compression ratio as high as possible as well as high target detection rate. In this paper a joint ATR-compression system based on the subband coding and VQ is proposed, which utilizes the encoder as a predictor or classifier for target detection. Simulation result shows that the proposed system achieves a relatively high level of target detection performance as well as a high compression ratio over 200:1.

  • PDF

Development and Performance Compensation of the Extremely Stable Transceiver System for High Resolution Wideband Active Phased Array Synthetic Aperture Radar (고해상도 능동 위상 배열 영상 레이더를 위한 고안정 송수신 시스템 개발 및 성능 보정 연구)

  • Sung, Jin-Bong;Kim, Se-Young;Lee, Jong-Hwan;Jeon, Byeong-Tae
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.21 no.6
    • /
    • pp.573-582
    • /
    • 2010
  • In this paper, X-band transceiver for high resolution wideband SAR systems is designed and fabricated. Also as a technique for enhancing the performance, error compensation algorithm is presented. The transceiver for SAR system is composed of transmitter, receiver, switch matrix and frequency generator. The receiver especially has 2 channel mono-pulse structure for ground moving target indication. The transceiver is able to provide the deramping signal for high resolution mode and select the receive bandwidth for receiving according to the operation mode. The transceiver had over 300 MHz bandwidth in X-band and 13.3 dBm output power which is appropriate to drive the T/R module. The receiver gain and noise figure was 39 dB and 3.96 dB respectively. The receive dynamic range was 30 dB and amplitude imbalance and phase imbalance of I/Q channel was ${\pm}$0.38 dBm and ${\pm}$3.47 degree respectively. The transceiver meets the required electrical performances through the individual tests. This paper shows the pulse error term depending on SAR performance was analyzed and range IRF was enhanced by applying the compensation technique.

A Design and Fabrication of the X-Band Transmit/Receive Module for Active Phased Array SAR Antennas (능동 위상 배열 SAR 안테나를 위한 X-대역 송수신 모듈의 설계 및 제작)

  • Chong, Min-Kil;Kim, Sang-Keun;Na, Hyung-Gi;Lee, Jong-Hwan;Yi, Dong-Woo;Baik, Seung-Hun
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.10
    • /
    • pp.1050-1060
    • /
    • 2009
  • In this paper, a X-Band T/R-module for SAR(Synthetic Aperture Radar) systems based on active phased array antennas is designed and fabricated. The T/R modules have a and width of more than 800 MHz centered at X-Band and support dual, switched polarizations. The output power of the module is 7 watts over a wide bandwidth. The noise figure is as low as 3.9 dB. Phase and amplitude are controlled by a 6-bit phase shifter and a 6-bit digital attenuator, respectively. Further the fabricated T/R module has est and calibration port with directional coupler and power divider. Highly integrated T/R module is achieved by using LTCC(Low Temperature Co-fired Ceramic) multiple layer substrate. RMS gain error is less than 0.8 dB max. in Rx mode, and RMS phase error is less than $4^{\circ}$ max. in Rx/Tx phase under all operating frequency band, or the T/R module meet the required electrical performance m test. This structure an be applied to active phase array SAR Antennas.

Design and Implementation of PDA based RFID Recognition System for the Logistics Application (물류응용을 위한 PDA 기반의 RFID 인식 시스템 설계 및 구현)

  • Jung Sung-Hun;Yim Jae-Hong;Kim Gi-Rae
    • Journal of Navigation and Port Research
    • /
    • v.30 no.1 s.107
    • /
    • pp.85-90
    • /
    • 2006
  • RFID(Radio Frequency IDentification) is appearing by point technology by Ubiquitous environment of new paradigm and Logistics' application But, RFID chip of this is high price and short bandwidth, low power and interference etc. can become technological problem This is getting into obstacle in common use. Reader and tag, Embedded software etc.. that are accomplishing standardization are imported paying most expensive royalty. This paper deals with a RFID cognition system that use PDA under ubiquitous environment to apply to Logistics system A RFID cognition system processes input/output of fundamental information attaching a tag onto products. And a RFID cognition system supports quick, correct and sqfe synthetic Logistics managerial system through construction of database. This can minimize logistics costs and improve the quality of customer service. A RFID cognition system has advantage that can widen range of application to area that cognition system of existent fixing style can not do. Also, it can expect economical effect through inexpensive system construction.

Feasibility Study of Forward-Looking Imaging Radar Applicable to an Unmanned Ground Vehicle (무인 차량 탑재형 전방 관측 영상 레이다 가능성 연구)

  • Sun, Sun-Gu;Cho, Byung-Lae;Park, Gyu-Churl;Nam, Sang-Ho
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.21 no.11
    • /
    • pp.1285-1294
    • /
    • 2010
  • This study describes the design and verification of short range UWB(Ultra Wideband) imaging radar that is able to display high resolution radar image for front area of a UGV(Unmanned Ground Vehicle). This radar can help a UGV to navigate autonomously as it detects and avoids obstacles through foliage. We describe the relationship between bandwidth of transmitting signal and range resolution. A vivaldi antenna is designed and it's radiation pattern and reflection are measured. It is easy to make array antenna because of small size and thin shape. Aperture size of receiving array antenna is determined by azimuth resolution of radar image. The relation of interval of receiving antenna array, image resolution and aliasing of target on a radar image is analyzed. A vector network analyzer is used to obtain the reflected signal and corner reflectors as targets are positioned at grass field. Applicability of the proposed radar to UGV is proved by analysis of image resolution and penetrating capability for grass in the experiment.

Optimal Design of a 2-D Quadrature Polar Separable Filter (2차원 Quadrature Polar Separable 필터의 최적 설계)

  • 박종안;박승진
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.16 no.5
    • /
    • pp.434-444
    • /
    • 1991
  • An improved 2-D quadrature polar separable (QPS) filter and its applications to texture processing are discussed in thie paper. The frequency response of the filter consists of two independent parts. The first is a radial weighting function based on the prolate spheridal sequence(PSS). The second is the same orientational function of the angle as in the Knutsson filter. The new filter is suboptimal in the energy loss because we let the polar angle function approximate the radial weighting function as in the 2-D Cartesian filter composed of two PSS's. It is easy to control as it depends only upon the design specification of the bandwidth, the drectional agnle, and the central freqneucy. Also the filter is circularly more symmetric in the frequency domain than the Knutsson filter. In order to estimate the orientation and the frequency component of loca textures in the frequency domain, some applications of the new filter, such as the generation of synthetic textures, the estimation of texture orientations, and texture segementations, are discussed.

  • PDF

Implementation of Mobile Computing based RFID Reconition System (모바일 컴퓨팅 환경의 RFID 인식 시스템 구현)

  • Jung, Sung-Hun;Lee, Bong-Keun;Yim, Jae-Hong
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • v.9 no.2
    • /
    • pp.119-122
    • /
    • 2005
  • RFID(Radio Frequency IDentification) is appearing by point technology by Ubiquitous environment of new paradigm and Logistics' application. But, RFID chip of this is high price and short bandwidth, low power and interference etc. can become technological problem. This is getting into obstacle in common use. Reader and tag, Embedded software etc.. that is accomplishing standardization is imported paying most expensive Royalty. This paper is RFID cognition system that use PDA in Ubiquitous environment to apply to Logistics system. RFID cognition system processes input/output of fundamental information attaching tag to Logistics of products. And RFID cognition system supports quick and correct and safe synthetic Logistics managerial system through construction of database. This can prove minimization and customer service of Logistics expense. RFID cognition system is advantage that can widen range of application to area that cognition system of existent fixing style can not do. Also, It can expect economical effect through inexpensive system construction.

  • PDF