• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.46-58
• /
• 2016

In this study, the stress applied to screw section, strain, displacement, von Mises stress, and the compression stress applied to the rubber packing for watertightness are estimated with computer simulation when the tightening torque of valve socket is in the range of $10{\sim}130N{\cdot}m$ in order to analyze the influence of valve socket screw section in accordance with the excessive tightening which is supposed to be the cause of water leakage from the synthetic resin piping for fire fighting application of sprinkler equipment, and for the sake of verifying this, adequate value of tightening torque and the value of the compression stress of rubber packing are investigated by examining the number of connected thread for each tightening torque, the deformation state of valve socket and rubber packing and conducting the water hammering test. The result of this test is expected to be utilized as the data required for revising the standard or technical criteria to prevent the water leakage of the synthetic resin piping for fire fighting application.

• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.73-76
• /
• 2005

The acaricidal activities of 12 commercial constituents derived from Eugenia caryophyllata leaf oils against Dermatophagoides farinae, D. pteronyssinus and Tyrophagus putrescentiae adults were examined using an impregnated fabric disk application and compared with that of the commercial benzyl benzoate as synthetic acaricide. On the basis of $LD_{50}$ values, the most toxic compound was methyl eugenol ($4.13\;{\mu}g/cm^2$), followed by methyl isoeugenol ($4.19\;{\mu}g/cm^2$), isoeugenol ($4.29\;{\mu}g/cm^2$), eugenol ($4.94\;{\mu}g/cm^2$), and acetyl eugenol ($13.91\;{\mu}g/cm^2$) against D. farinae. In the case of D. pteronyssinus, isoeugenol ($2.93\;{\mu}g/cm^2$) was the most toxic, followed by methyl isoeugenol ($3.28\;{\mu}g/cm^2$), methyl eugenol ($3.87\;{\mu}g/cm^2$), eugenol ($3.92\;{\mu}g/cm^2$), and acetyl eugenol ($7.21\;{\mu}g/cm^2$). These results suggest that D. pteronyssinus may be controlled more effectively by the application of eugenol congeners than D. farinae. In comparison with synthetic acaricides, the acaricidal activities of eugenol, isoeugenol, methyl eugenol, and methyl isoeugenol were about 1.9-2.2 times more toxic than benzyl benzoate. Furthermore, the most toxic constituent against T. putrescentiae was exhibited on eugenol ($10.11\;{\mu}g/cm^2$), followed by methyl eugenol ($38.67\;{\mu}g/cm^2$) and acetyl eugenol ($70.09\;{\mu}g/cm^2$), but no activity was observed for isoeugenol and methyl isoeugenol. The results suggested that eugenol congeners may be useful as a new source for selective control of house dust mites and stored food mites.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.402-408
• /
• 2019

Purpose: The study want to verify application the medium expantion foam extinguisher of expantion foam rate and fire extinguishing Performance test because the medium expansion system can maintain the discharge distance less affected by air currents, and the foam agent can be used efficiently. Method: For the study, the medium-expansion testing apparatus was manufactured and with synthetic surfactant foam agent of (class B) fire extinguishing model, and Fire Performance was analyzed for foam expansion rate and the fire agent consumption was measured and analyzed. Results: We measured the medium-spray testing apparatus and found that the expansion rate was 26.1 times. The test results of a 20-unit fire extinguishing model show that the extinguishing time is faster than the high and low foam expansion. It has been analyzed that it is possible to apply a hand-operated with a hose reel or medium expansion apparatus. Conclusion: Considering that the foaming agent and the extinguishing performance of the medium foam ratio are excellent, It is necessary to introduce the technical standards of medium foam agent for the introduction of hand-operated equipment, such as hose reel or portable medium foam apparatus.

• Korean Journal of Radiology
• /
• v.25 no.3
• /
• pp.224-242
• /
• 2024

The emergence of Chat Generative Pre-trained Transformer (ChatGPT), a chatbot developed by OpenAI, has garnered interest in the application of generative artificial intelligence (AI) models in the medical field. This review summarizes different generative AI models and their potential applications in the field of medicine and explores the evolving landscape of Generative Adversarial Networks and diffusion models since the introduction of generative AI models. These models have made valuable contributions to the field of radiology. Furthermore, this review also explores the significance of synthetic data in addressing privacy concerns and augmenting data diversity and quality within the medical domain, in addition to emphasizing the role of inversion in the investigation of generative models and outlining an approach to replicate this process. We provide an overview of Large Language Models, such as GPTs and bidirectional encoder representations (BERTs), that focus on prominent representatives and discuss recent initiatives involving language-vision models in radiology, including innovative large language and vision assistant for biomedicine (LLaVa-Med), to illustrate their practical application. This comprehensive review offers insights into the wide-ranging applications of generative AI models in clinical research and emphasizes their transformative potential.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.554-560
• /
• 2006

This paper describes the demonstration of successful fabrication and initial characterization of micromachined pressure sensors and micromachined jets (microjets) fabricated for use in macro flow control and other applications. In this work, the microfabrication technology was investigated to create a micromachined fluidic control system with a goal of application in practical fluids problems, such as UAV (Unmanned Aerial Vehicle)-scale aerodynamic control. Approaches of this work include: (1) the development of suitable micromachined synthetic jets (microjets) as actuators, which obviate the need to physically extend micromachined structures into an external flow; and (2) a non-silicon alternative micromachining fabrication technology based on metallic substrates and lamination (in addition to traditional MEMS technologies) which will allow the realization of larger scale, more robust structures and larger array active areas for fluidic systems. As an initial study, an array of MEMS pressure sensors and an array of MEMS modulators for orifice-based control of microjets have been fabricated, and characterized. Both pressure sensors and modulators have been built using stainless steel as a substrate and a combination of lamination and traditional micromachining processes as fabrication technologies.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.36 no.6
• /
• pp.239-246
• /
• 2014

Many kinds of membrane have been used for the guided bone regeneration (GBR) technique. However, most membranes do not fulfill all requirements for the ideal membrane for the GBR technique. Among them, collagen membrane has been most widely used. However, its high price and weak tensile strength in wet condition are limitations for wide clinical application. Synthetic polymers have also been used for the GBR technique. Recently, silk based membrane has been considered as a membrane for the GBR technique. Despite many promising preclinical data for use of a silk membrane, clinical data regarding the silk membrane has been limited. However, silk based material has been used clinically as vessel-tie material and an electrospun silk membrane was applied successfully to patients. No adverse effect related to the silk suture has been reported. Considering that silk membrane can be provided to patients at a cheap price, its clinical application should be encouraged.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1282-1282
• /
• 2001

Near Infrared (NIR) spectra has long been used in industry to monitor rates of reactions via calculation of analyte concentrations. However, the kinetic information is inherent in the data through spectral ratios. Two-dimensional correlation spectroscopy (2D-COS) is a spectral method that is based on changes (e.g. concentration) in time and is therefore uniquely suited for reaction monitoring. This method is especially useful in the understanding of how the reaction(s) proceeds. We will show the application of 2D-COS to synthetic kinetic data from different reaction orders to illustrate the method. We will then show application to real reactions of various orders. Finally, we will illustrate how 2D-COS will be of specific interest to developing optimized industrial reactions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.3
• /
• pp.455-462
• /
• 2003

Biotechnological research and development are moving at a very fast rate. The subject has assumed greatest importance in recent years in the development of agriculture and human health. The science of biotechnology has endowed us with new tools and tremendous power to create novel genes and genotypes of plants, animals and fish. The application of biotechnology in the fisheries sector is a relatively recent practice. Nevertheless, it is a promising area to enhance fish production. The increased application of biotechnological tools can certainly revolutionise our fish farming besides its role in biodiversity conservation. The paper briefly reports the current progress and thrust areas in the use of synthetic hormones in fish breeding, production of monosex, uniparental and polyploid individuals, molecular biology and transgenesis, biotechnology in aquaculture nutrition and health management, gene banking and the marine natural products.

• Biomolecules & Therapeutics
• /
• v.20 no.5
• /
• pp.446-456
• /
• 2012

Actoprotectors are preparations that enhance body stability against physical loads without increasing oxygen consumption or heat production. Or, in short, actoprotectors are synthetic adaptogens with a significant capacity to improve physical performance. This paper explores the history of actoprotectors' development, their pharmacological properties, mechanism of action, and practical application to the improvement of mental and physical performance. A brief summary of the clinico-pharmacological characteristics of the main representatives of this class (bemitil and bromantane) is provided. Some other synthesized compounds, and even natural ones such as ginseng, also are regarded as potential actoprotectors, and these are treated herein as well. Actoprotectors, owing to their wide-ranging pharmacological activities, high efficiency and safety, can be applied under either normal or extreme conditions.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.105-113
• /
• 2010

SAR(Synthetic Aperture Radar) has characteristics well-suited for the measurement of geophysical parameters during day and night in all weather conditions. Recently, SAR data with high resolution acquired by satellites became available to the public. In such data, many features and phenomena of geometric structure of man-made objects and natural environments become observable. In this paper, we discuss main considerations including geometric distortion and coregistration for efficient utilization of high resolution SAR images. And, various advanced technologies in SAR application fields are introduced.