• Journal of Environmental Health Sciences
• /
• v.27 no.3
• /
• pp.107-112
• /
• 2001

This work reports the application of a hollow fiber module(HFM) for Cr(VI) extraction from heavy metal salts mixed solution by using microporous hydrophobic hollow fiber module. In HFM configuration, the organic extraction used for the extraction of Cr(VI) was di-(2-ethyl hexyl) phosphoric acid(D2EHPA) diluted with n-heptane. The study of HFM includes the influence of hydrodynamic and chemical condition, i.e., the flow rate of feed solution, the time of reactive extraction, the concentration of feed solution, and the pH of aqueous phase solutions. Several experiments with synthetic solution of different mixed components system of Cr(VI) solutions established optimum condition to achieve a clean separation of Cr(VI). It was possible to separate Cr(VI) in the presence of metal salts mixed solution, such as Zn(II), Ni(II), Cu(II), and Cd(II) using the HFM technique.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.2
• /
• pp.53-58
• /
• 1996

This study was performed to measure and evaluate the characteristics of removal efficiency and kinetics in the electrolytic decolorizing process of dye wastewater containing acid dye Red 114 by using Fe anode. The synthetic wastewater samples of 500, 1000, $2000mg/{\ell}$ concentration were tested and as an attempt to assess the feasibility of the present system for the industrial application, a sample of wastewater collected by J textile factory in Eujungbu city was also treated. It was found that the optimum conditions were pH 7, 8Volt and removal efficiency in synthetic wastewater containing $2000mg/{\ell}$ of dye and 0.2% of electrolyte (NaCl) was 99.68% after 20minutes of reaction time. In this condition, overall rate constant was $4.77{\times}10^{-5}mmol/cm^{3}hr$. The Decolorizing efficiency and COD removal efficiency of J textile factory wastewater were 99% and 86% respectively at pH 7, 8Volt for 40minutes of reaction time.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.41-45
• /
• 2006

From the 1978 Seasat synthetic aperture radar(SAR) to present systems, spaceborne SAR has demonstrated the capability to image the Earth's ocean and land features over broad areas, day and night, and under most weather conditions. The application of SAR for surveillance of commercial fishing grounds can did in the detection of illegal fishing activities and provides more efficient use cf limited aircraft or patron craft resources. In the area of vessel traffic monitoring for commercial vessels, Vessel Traffic Service (VTS) which uses the ground-based radar system has some difficulties in detecting moving ships due to the limited detection range cf about 10 miles. This paper introduces the field testing results of ship detection by RADARSAT SAR imagery, and proposes a new approach for a Vessel Monitoring System(VMS), including VTS, and SAR combination service.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.134-137
• /
• 2007

GB-SAR (Ground-Based Synthetic Aperture Radar) 시스템은 지상에서 안테나의 정밀한 일축 제어를 통해 합성 구경(synthetic aperture) 효과를 얻어 높은 해상도의 영상을 얻는 레이더 스캐너(Radar Scanner) 의 일종이다. GB-SAR는 장기간에 걸쳐 안정 적으로 마이크로파 영상 및 위상을 얻을 수 있기 때문에，SAR간섭기법(interferometry)을 통하여 비교적 안정된 산란체의 시간에 따른 변위를 cm 혹은 mm 정밀도로 정량적으로 얻을 수 있으며, 또한 긴밀도(coherence)를 통해 산란체의 안정성을 정성적으로 추출해 낼 수 있다. 이 논문에서는 GB-SAR 시스템의 개발을 소개하고 여러 가지 영상 획득 모드를 통하여 얻어진 SAR 영상， DInSAR, Cross-Track InSAR, ${\triangle}k-InSAR$, PSInSAR, 및 SAR Polarimetry 등 GB-SAR 시스템의 다양한 응용 가능성을 간략하게 보였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.415-418
• /
• 2005

Nowadays the three major commercially available of organic chemical admixtures are modified lignosulfonates(LS), sulfonated naphthalene-formaldehyde resins (SNF) and sulfonated melamine-formaldehye (SMF). In this study, various sulfonated melamine-formaldehyde (SMF) superplasticizers were synthesized via four synthetic steps. Hydroxymethylation (Step 1), Sulfonation (Step 2), Polymerization (Step 3) and Neutralization and Stabilization (Step 4). In this synthesis of SMF, reaction conditions such as the mole ratio of melamine to formaldehyde and the amount of acid catalyst were changed. After application of SMF superplasticizer to cement paste and mortar, the physical properties including workability, slump loss, compressive strength were compared.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.747-753
• /
• 1999

Microbial surfactants are more effective and environmentally friendly than many synthetic surfactants. Sophorolipid, a glycolipid type microbial surfactant, is produced from C. bombiocola. Cultivation techniques to increase the productivity have been developed using various carbon sources and reactor setup, reaching its concentration upto 100-300 g/L. Due to its high productivity and non-toxicity, sophorolipid became one of the most promising alternative to synthetic surfactants. Fermentative production of sophorolipid depends primarily on the carbon sources, such as glucose and vegetable oils, and nitrogen sources. Chemical modification of the sophorolipid produces various derivative with different physical properties including hydrophile-liphophilie balance(HLB), emulsion formation, surface tension and dispersing ability. Commercial potentials of sophorolipid in the cosmetic, health care and environment clean-up industries have been discussed.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.332-335
• /
• 2008

Newly developing SAR (Synthetic Aperture Radar) sensors commonly include high resolution X-band those data are expected to contribute various applications. Recent few studies are presenting potential of X-band SAR data in forest related application. This study tried to investigate the relationship between forest stand parameters and multi-band SAR normalized backscattering. Multi-band SAR data was radiometric corrected to compare signal from different forest stand condition. Then correlation coefficients were estimated between attribute of forest stand map and normalized backscattering coefficients. Although overall correlation coefficients are not high, only X-band shows strong relationship with DBH class than other bands. The signal of C- and L-band is composed of a large number of discrete tree components such as leaves, stems, even background soil. In forest, strength of radar backscattering is affected by complex parameters. Further study might be considered more various forest stand parameters such as canopy density, stand height, volume, and biomass.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.846-851
• /
• 2003

This study was performed to develop the lightweight polymer concrete using expanded clay and perlite to improve workability, durability and chemical resistance for bottom draining structure under severe condition. This paper was composed of two parts. One is to invest the physical and mechanical properties of lightweight polymer concrete using synthetic lightweight aggregate, the other is to the develop products for bottom draining structure. Physical and mechanical test for lightweight polymer concrete was performed unit weight, compressive and flexural strength, chemical resistance, accelerated weathering test, absorption ratio and optimum mix for lightweight polymer concrete was designed. Also, products for bottom draining structures by optimum mix of lightweight polymer concrete was made draining trench of small size.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2003

With current developments in enzyme-catalyzed reactions and techniques available for rational redesign of natural biocatalysts, the enzymatic biosynthesis can become one of the most valuable Synthetic methods. Enzymatic regioselective catalysis in organic media has played a key role in pursuing asymmetric synthesis for active chiral compounds. Here, we shortly do-scribe some historical issues of the rapidly growing area, enzymatic catalysis in synthetic organic chemistry and then review researches that have been carried out in the regioselective enzymatic catalysis for the past two decades. An application of this technology to the modification of some potential target drug co m pound will be adios presented.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.111-120
• /
• 2015

Contaminants of emerging concern (CECs) including endocrine disrupting compounds (EDCs) and pharmaceuticals and personal care product chemicals (PPCPs) have recently received more attention because of their occurrence in water bodies and harmful impacts on human health and aquatic organisms. Triclosan is widely used as a synthetic broad-spectrum antimicrobial agent due to its antimicrobial efficacy. However, triclosan detected in aquatic environment has been recently considered as one of CECs, because of the potential for endocrine disruption, the formation of toxic by-products and the development of cross-resistance to antibiotics in aquatic environment. This comprehensive review focuses on the regulations, toxicology, fate and transport, occurrence and removal efficiency of triclosan. Overall, this review aims to provide better understanding of triclosan and insight into application of biological treatment process as an efficient method for triclosan removal.