• 환경위생공학
• /
• 제13권1호
• /
• pp.147-156
• /
• 1998

A synthesis process for PZT powder using $NH_{3}$ gas as a precipitator in a bubble column reactor was experimentally successful in develope a production process of piezoelectric ceramic PZT powder. Also as a reaction by coprecipitation, the crystalized PZT ceramic powder at the condition of over pH 9 could be attained. The time needed for reaction on the condition of $NH_{3}$ gas flow rate = 0.5 1/min, Ar gas flow rate = 2.0 1/min. Feed flow rate = 2.33 ml/sec was less than five minutes, so it could synthesize PZT powder for such a few moments. And the synthesized PZT powder was $0.17{\mu}m$ in diameter on an average.

• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.959-961
• /
• 2001

Nanosized CeO$_2$Powders were prepared under high temperature and pressure conditions by precipitation from metal nitrates with aqueous potassium hydroxide. Spherical shape of CeO$_2$powder was obtained at 175$^{\circ}C$ for 6h. TEM and X-ray diffraction patterns showed that the synthesized particle was crystalline. The average size and size distribution of the synthesized particles were below 30 nm and narrow, respectively. In addition, the effects of synthesis parameters under hydrothermal process are discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.218-223
• /
• 2002

Low temperature synthesis of $LaNiO_3$ crystalline phase composited from mixtures of $La_2O_3$ and NiO via the ball mill and mechanochemical process were investigated. By the ball mill, 20% of $LaNiO_3$ crystalline phase was formed in the samples sintered at $900^{\circ}C$ due to the lack of reactivity of NiO. However, the mechanochemical process yielded about 93% of $LaNiO_3$ crystalline phase in room temperature.

• 한국정밀공학회지
• /
• 제21권11호
• /
• pp.140-148
• /
• 2004

Tight integration of product design and process planning in the early design stage would make bigger impact as wider spectrum of design and manufacturing alternatives can be pursued and evaluated. Thus the development of systematic computer-based supporting for this integration if desirable. For this integration and process planning in the early design stage, the systematic method to synthesize shape of part from functional requirements is crucial. This research presents the methods of functional decomposition from overall function of product and synthesizing shape of part based on functional relations extracted from functional decomposition using planetary gear transmission system as an example.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.407-416
• /
• 2018

This study presents a novel complete solution starting with a synthesis of silica modified with potassium-nickel hexacyanoferrate and ethanolamine (SiEA-KNiFe) sorbent through radiocesium sorption in different process configurations and moving on to the vitrification of the spent sorbent, using the sol-gel method. The experimental data for deionized water solution, as well as seawater solution, correlates strongly with the Langmuir isotherm model. Moreover, the study also presents a method for spent sorbent solidification in the glass matrix. The cesium leaching test confirmed that spent sorbent can be stably bound in the glass matrix after radionuclide removal.

• 한국정보통신학회논문지
• /
• 제26권10호
• /
• pp.1537-1544
• /
• 2022

application specific integrated circuit (ASIC) 및 system on chip (SoC) 설계 시 디지털 회로는 클럭에 동기화되어 작동한다. 칩 설계 시, place & route (P&R)에서 설계 조건과 타이밍 조건, 클럭의 동기화 여부 등을 고려한다. P&R에서 클럭 경로에 대한 delay를 줄이기 위해, clock tree synthesis (CTS) 기법을 이용한다. 본 논문에서는 사전 클럭트리 합성 가능 여부 판단을 위한 shallow-CTS 알고리즘을 소개한다. 오픈 소스 Parser-Verilog를 사용하여 register transfer level (RTL) 합성가능한 Verilog를 파싱하여, Pre-CTS와 Post-CTS 단계를 진행하고, 가장 긴 clock path와 버퍼 삽입 전후의 표준편차를 비교하여 CTS의 정확도에 대해 분석한다. 본 논문에서 시간 투입이 많이 되는 licensed EDA tool을 사용하여 CTS 결과를 확인하지 않고, RTL 수준에서 사전 클럭 트리 합성 검증 방법을 제공하여 비용 및 시간문제를 감소할 수 있을 것으로 기대된다.

• 청정기술
• /
• 제22권4호
• /
• pp.250-257
• /
• 2016

As an attempt to replacing petroleum-based chemicals with bio-based ones, synthesis of furfural from biomass-derived xylose attracts much attention in recent days. Conventionally, furfural from xylose has been produced via the utilization of highly corrosive, toxic, and environmentally unfriendly mineral acids such as sulfuric acid or hydrochloric acid. In this study, microwave-assisted biphasic reaction process in the presence of novel bio-based heterogeneous acid catalysts was developed for the eco-benign and effective synthesis of furfural from xylose. The microwave was irradiated for reaction acceleration and a biphasic system consisting of $H_2O$ : MIBK (1 : 2) was designed for continuous extraction of furfural into the organic phase in order to reduce the undesired side products formed by decomposition/condensation/oligomerization in the acidic aqueous phase. Moreover, sulfonated amorphous carbonaceous materials were prepared from wood powder, the most abundant lignocellulosic biomass. The prepared catalysts were characterized by FT-IR, XPS, BET, elemental analysis and they were used as bio-based heterogeneous acid catalysts for the dehydration of xylose into furfural more effectively. For further optimization, the effect of temperature, reaction time, water/organic solvent ratio, and substrate/catalyst ratio on the xylose conversion and furfural yield were investigated and 100% conversion of xylose and 74% yield of furfural was achieved within 5 h at $180^{\circ}C$. The bio-based heterogeneous acid catalysts could be used three times without any significant loss of activity. This greener protocol provides highly selective conversion of xylose to furfural as well as facile isolation of product and bio-based heterogeneous acid catalysts can alternate the environmentally-burdened mineral acids.

• 에너지공학
• /
• 제16권2호
• /
• pp.58-63
• /
• 2007

최근 신 고유가 시대를 맞이하여 천연가스를 이용한 합성석유 제조기술 개발의 중요성이 점차로 부각되고 있는 상황이다. GTL(Gas-to-Liquids) 공청은 현재의 고유가 상황에서 경쟁력 있는 사업 분야를 제공 할 것으로 분석되고, GTL 제품은 환경오염물질이 거의 없어 21 세기의 환경규제 강화 추세에 효과적으로 대응할 수 있는 청정연료이다. GTL 공정은 크게 천연가스의 주성분인 메탄의 리포밍 반응을 거쳐 합성가스 ($CO+H_{2}$)를 제조하는 단계, 이 합성가스로부터 FT 합성반응을 통하여 액체 합성원유를 제조하는 단계, 합성원유를 개질하는 단계 (수첨분해/수첨이성질화)로 이루어진다. 본 총설에서는 GTL 기술의 개요와 세계적인 개발 동향을 천연가스 reforming 기술과 FT 합성유 제조 기술에 중점을 두고서 소개하고자 한다.

• 한국분말재료학회지
• /
• 제22권1호
• /
• pp.39-45
• /
• 2015

In this study, cobalt nanopowder is fabricated by sonochemical polyol synthesis and magnetic separation method. First, sonochemical polyol synthesis is carried out at $220^{\circ}C$ for up to 120 minutes in diethylene glycol ($C_4H_{10}O_3$). As a result, when sonochemical polyol synthesis is performed for 50 minutes, most of the cobalt precursor ($Co(OH)_2$) is reduced to spherical cobalt nanopowder of approximately 100 nm. In particular, aggregation and growth of cobalt particles are effectively suppressed as compared to common polyol synthesis. Furthermore, in order to obtain finer cobalt nanopowder, magnetic separation method using magnetic property of cobalt is introduced at an early reduction stage of sonochemical polyol synthesis when cobalt and cobalt precursor coexist. Finally, spherical cobalt nanopowder having an average particle size of 22 nm is successfully separated.

• 한국자기학회지
• /
• 제21권3호
• /
• pp.108-115
• /
• 2011

이 글에서는 응집물질물리 실험에 필수적인 소규모의 연구용 고순도 시료 제작에 있어 기본적인 사항들을 살펴본다. 연구자들이 쉽게 접근할 수 있는 시료 제작법들을 중심으로 제작 과정과 유의점등을 소개하려 한다. 가장 흔히 사용되는 고상소결법으로 부터 시작하여 다양한 환경에서 다결정 및 단결정 제작에 필수적인 석영관을 이용한 시료 제작에 대해 설명하고 단결정 제작의 기초와 다양한 단결정 성장법에 대해서도 전반적으로 소개하여 시료 제작을 처음 접하는 연구자들의 이해를 돕도록 한다.