• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.3
• /
• pp.233-240
• /
• 2010

Derivatives of a novel natural compunds, melanostatin (PLG-$NH_2$) were prepared by solid phase synthesis[1,2] and assayed to evaluate their melanogensis inhibitory activity. Also, a small library (natural compound-XLG-$NH_2$, natural compound-X LG-OH) was prepared with same method for increasing synthetic yield and cost-reduction. PLG-$NH_2$ (Proline-Leucine-Glycine-$NH_2$) was well-known tripeptide as its $\alpha$-MSH release-inhibiting activity and tyrosinase inhibitory activity[3-5]. In order to choose best candidate for peptide derivatization, various natural compounds were screened by their tyrosinase inhibitory activity. As a result, caffeic acid and coumaric acid were selected. Most of these derivatives showed better activities than the parent natural compound, melanostatin.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.3
• /
• pp.297-305
• /
• 2014

Red ginseng (RG) contains specific ginsenosides (Rg2, Rg3) which show various pharmacological effects and absorption rate in the body better than panax ginseng. Therefore many people have been used it for health for a long time. Furthermore, many researchers have been studying its biological activities for a long times because fermentation generates lots of beneficial small molecules good for health. In this study, we fermented red ginseng with mycelium of Leatiporus sulphures var. miniatus for 7 days. As a result, we found that three ginsenosides Rg1, Re and Rb2 were decreased from 0.24, 0.25, 0.16 mg/g to 0.12, 0.1, 0.03 mg/g respectively HPLC analysis. In addition, we studied biological activities of fermented red ginseng (FRG) about skin ageing such as anti-inflammation, cell migration, anti-oxidation, collagen type 1 synthesis, and MMP-1 inhibition activities. As a result, FRG were shown higher anti-inflammatory and cell migration promoting activities than RG. FRG inhibited production of nitric oxide (NO) and mRNA expression of inducible nitric oxide synthase (iNOS) and decreased interleukin (IL)-6 induced by LPS stimulation in RAW 264.7 cells. In conclusion, this study suggest that FRG could be a potential source as a new natural anti-inflammatory agent.

• Proceedings of the Ginseng society Conference
• /
• 1974.09a
• /
• pp.101-113
• /
• 1974

The radioactive compound sodium $acetate-U-C^{14}$ (C-14 acetate) was administered to two- and four-year-old July and September American ginseng (Panax quinquefolium L.) plants and cuttings. The C-14 acetate uptake was approximately $99\%.$ The autoradiochromatograms suggest that the saponins(panaquilins) isolated by preparative thin-layer chromatography contained impurities, especially those isolated from the leaf and stem extracts. The root and fruit methanol extracts yielded relatively pure saponins. The large amounts of panaquilin B and its proximity to panaquilin C on preparative thin-layer plates resulted in some admixing. The average concentration $(\%$ plant dry weight) of semipurified saponins were high in the leaves $(13.8\%),$ compared to fruits $(9.8\%),\;stems\;(7.9\%)\;and\;roots\;(6.3\%).$ The average percentage of C-14 acetate incorporation into panaquilins was $4.8\%.$ The average percentage of C-14 acetate incorporation into panaquilins B and C was higher $(1.40\%\;and\;1.13\%,$ respectively) than that into panaquilin C, (d), G-1 and G-2 $(0.75\%,\;0.65\%,\;0.13\%\;and\;0.53\%,$ respectively). Panaquilin synthesis may be depending upon the part collection period and age of the plant. The average percentage of C-14 acetate incorporation into panaquilin B is high in roots $(0.58\%)\;and\;stems\;(0.48\%);$ that into panaquilins C and (d) high in leaves $(0.40\%\;and\;0.45\%,$ respectively); and that into panaquilin E high in roots and leaves $(0.55\%\and\;0.50\%,$ respectively). Panaquilin G-2 was synthesized in all parts of plants. The panaquilins appear to be biosynthesized more actively in July than September (exception-panaquilin G-l). Panaquilins B, C and G-1 may be biosynthesized more actively in four-year-old plants and panaquilins (d) and E more actively in two-year-old plants. The results from expectance with cuttings suggest that the panaquilins are synthesized de novo in the above-ground parts of ginseng plants, and that panaquilin G-l may be synthesized de novo in the leaf. It is known from the tissue culture studies that panaquilins are produced by leaf, stem and root callus tissues and callus-root cultures of American and Korean ginseng plants. Panaquilins may actively be synthesized de novo in most any cell or organ of the ginseng plants. It was verified that C-14 acetate was incorporated into the panaxadiol portions of the panaquilins of two-year-old plants (sp. act., 0.56 $m{\mu}Ci/mg$) and four-year-old plants (sp. act., 0.54 $m{\mu}Ci/mg$).

• Journal of the Korean Chemical Society
• /
• v.38 no.2
• /
• pp.101-107
• /
• 1994

Some molybdenum(III) and (IV) complexes have been prepared from the reaction of $MoCl_4$·2MeCN with N, P, O-donating ligands and characterized by elemental analysis, infrared and UV-Visible spectroscopy. 3,5-Lutidine, 1,2-phenylenediamine, 8-hydroxyquinoline, 9,10-phenanthrenequinone, triphenylphosphine and 1,2-bis(diphenylphosphino)ethane were chosen as coordinating ligands. Stretching frequencies $\upsilon$ (Mo-Cl) of Mo(IV) appear at higher frequencies than those of Mo(III) complexes due to the increasing oxidation number of metal. $MoCl_4(L)_2$ exhibit one Mo-Cl stretching frequency, whereas Mo$Cl_4$(L^L) exhibit four Mo-Cl stretching frequencies. The number of Mo-Cl stretching frequency suggestes the former complexes have trans($D_{4h}$) and the latter complexes have cis($C_{2v}$) symmetry. Stretching frequency ${\nu}g(C{\equiv}N)$ of acetonitrile in Mo(III) complexes are shifted to about 30 $cm^{-1}$ higher frequency compared with that of a free ligand (2260 $cm^{-1}$). These spectral data indicates that Mo(III) complexes are in the octahedral geometries with the coordinated acetonitrile. Finally each molybdenum(III) and (IV) complexes showed the following formulation; $[MoCl_4(L)_2]$,[Mo$Cl_4$(L^L)], $[MoCl_3(L)_2MeCN]$ and [Mo$Cl_3$(L^L)MeCN].

• Clean Technology
• /
• v.17 no.4
• /
• pp.314-324
• /
• 2011

Several amide derivatives have been used as additives for base oil of metal working fluids and pressure working oils. In this paper, a series of succinic acid alkyl half-amide derivatives were synthesized as over 97% yields by ring-opening reaction of succinic anhydride and several amines and were soluble in 100 N base oil within 1 wt% concentration. The structures of the synthesized amides were confirmed by $^1H$-NMR, FT-IR spectrum and GC analysis. Anti-corrosion properties of the amides in sea water were evaluated through ASTM D665 method and weight loss method. As the results of anti-corrosion properties, the properties of the amides with shorter alkyl chain and high concentration showed better performance than those with longer alkyl chain and low concentration. Also, the dialkyl amides showed better anti-corrosion properties than those of the monoalkyl amides. Inhibition efficiency% (IE%) was over 93% in the concentration of 40 ppm and corrosion rate (CR) was below 0.5 mm/year in the same concentration.

• Clean Technology
• /
• v.24 no.2
• /
• pp.99-104
• /
• 2018

In this work, we performed the methanation reaction using synthesis gas ($H_2/CO_2$) for the process to produce synthetic natural gas (SNG) for $4^{th}$ methanation reactor in SNG process proposed by RIST-IAE. Experimental conditions were changed with temperature, pressure and space velocity. At this time, $CO_2$ conversion, $CH_4$ selectivity and $H_2$ concentration after reaction were investigated. As a result, $CH_4$ selectivity by the $CO_2$ methanation increased with lower space velocity and higher pressure. On the other hand, in the case of temperature, the maximum value was shown at $320^{\circ}C$. From these results, it was found that the optimum condition of the fourth reactor suitable for the SNG process was obtained.

• Clean Technology
• /
• v.24 no.3
• /
• pp.239-248
• /
• 2018

In this study, pervaporation experiments of water, ethanol and IPA (Isopropyl alcohol) single components and water/ethanol, water/IPA mixtures were carried out using zeolite 4A membranes developed by Fine Tech Co. Ltd. Those membranes were fabricated by hydrothermal synthesis (growth in hydrothermal condition) after uniformly dispersing the zeolite seeds on the tubular alumina supports. They have a pore size of about $4{\AA}$ by ion exchange of $Na^+$ to the LTA structure with Si/Al ratio of 1.0, and shows strong hydrophilic property. Physical characteristics of prepared membranes were evaluated by using SEM (surface morphology), porosimetry (macro- or meso- pore analysis), BET (micropore analysis), and load tester (compressive strength). Pervaporation experiments with various temperature and concentration conditions confirmed that the zeolite 4A membrane can selectively separate water from ethanol and IPA. Water/ethanol separation factor was over 3,000 and water/IPA separation factor was over 1,500 (50 : 50 wt%, initial feed concentration). Pervaporation behaviors of single components and binary mixtures were predicted using ACM (activity coefficient model), GMS (generalized Maxwell Stefan) model and DGM (Dusty Gas Model). The adsorption and diffusion coefficients of the zeolite top layer were obtained by parameter estimation using GA (Genetic Algorithm, stochastic optimization method). All the calculations were carried out using MATLAB 2018a version.

• Corrosion Science and Technology
• /
• v.9 no.4
• /
• pp.147-152
• /
• 2010

Conventional paints for conversion coating applications in steel production derived mainly from water-based polymer dispersions containing several additives actually show good general performance, but suffer from poor scratch and abrasion resistance during use. The reason for this is because the relatively soft organic binder matrix dominates the mechanical surface properties. In order to maintain the high quality and decorative function of coated steel sheets, the mechanical performance of the surface needs to be improved significantly. In fact the wear resistance should be enhanced without affecting the optical appearance of the coatings by using appropriate nanoparticulate additives. In this direction, nanocomposite coating compositions (Nanomer$^{(R)}$) have been derived from water-based polymer dispersions with an increasing amount of surface-modified nanoparticles in aqueous dispersion in order to monitor the effect of degree of filling with rigid nanoparticles. The surface of nanoparticles has been modified for optimum compatibility with the polymer matrix in order to achieve homogeneous nanoparticle dispersion over the matrix. This approach has been extended in such a way that a more expanded hybrid network has been condensed on the nanoparticle surface by a hydrolytic condensation reaction in addition to the quasi-monolayer type small molecular surface modification. It was expected that this additional modification will lead to more intensive cross-linking in coating systems resulting in further improved scratch-resistance compared to simple addition of nanoparticles with quasi-monolayer surface modification. The resulting compositions have been coated on zinc-galvanized steel and cured. The wear resistance and the corrosion protection of the modified coating systems have been tested in dependence on the compositional change, the type of surface modification as well as the mixing conditions with different shear forces. It has been found out that for loading levels up to 50 wt.-% nanoparticles, the mechanical wear resistance remains almost unaffected compared to the unmodified resin. In addition, the corrosion resistance remained unaffected even after $180^{\circ}$ bending test showing that the flexibility of coating was not decreased by nanoparticle addition. Electron microscopy showed that the inorganic nanoparticles do not penetrate into the organic resin droplets during the mixing process but rather formed agglomerates outside the polymer droplet phase resulting in quite moderate cross linking while curing, because of viscosity. The proposed mechanisms of composite formation and cross linking could explain the poor effect regarding improvement of mechanical wear resistance and help to set up new synthesis strategies for improved nanocomposite morphologies, which should provide increased wear resistance.

• Korean Journal of Poultry Science
• /
• v.47 no.1
• /
• pp.9-19
• /
• 2020

Avian influenza (AI) viruses are highly contagious viruses that infect many bird species and are zoonotic. Ducks are resistant to the deadly and highly pathogenic avian influenza virus (HPAIV) and remain asymptomatic to the low pathogenic avian influenza virus (LPAIV). In this study, we identified common differentially expressed genes (DEGs) after a reanalysis of previous transcriptomic data for the HPAIV and LPAIV infected duck lung cells. Microarray datasets from a previous study were reanalyzed to identify common target genes from DEGs and their biological functions. A total of 731 and 439 DEGs were identified in HPAIV- and LPAIV-infected duck lung cells, respectively. Of these, 227 genes were common to cells infected with both viruses, in which 193 genes were upregulated and 34 genes were downregulated. Functional annotation of common DEGs revealed that translation related gene ontology (GO) terms were enriched, including ribosome, protein metabolism, and gene expression. REACTOME analyses also identified pathways for protein and RNA metabolism as well as for tissue repair, including collagen biosynthesis and modification, suggesting that AIVs may evade the host defense system by suppressing host translation machinery or may be suppressed before being exported to the cytosol for translation. AIV infection also increased collagen synthesis, showing that tissue lesions by virus infection may be mediated by this pathway. Further studies should focus on these genes to clarify their roles in AIV pathogenesis and their possible use in AIV therapeutics.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.65-65
• /
• 2012

Copper zinc tin sulfide ($Cu_2ZnSnS_4$, CZTS) is a very promising material as a low cost absorber alternative to other chalcopyrite-type semiconductors based on Ga or In because of the abundant and economical elements. In addition, CZTS has a band-gap energy of 1.4~1.5eV and large absorption coefficient over ${\sim}10^4cm^{-1}$, which is similar to those of $Cu(In,Ga)Se_2$(CIGS) regarded as one of the most successful absorber materials for high efficient solar cell. Most previous works on the fabrication of CZTS thin films were based on the vacuum deposition such as thermal evaporation and RF magnetron sputtering. Although the vacuum deposition has been widely adopted, it is quite expensive and complicated. In this regard, the solution processes such as sol-gel method, nanocrystal dispersion and hybrid slurry method have been developed for easy and cost-effective fabrication of CZTS film. Among these methods, the hybrid slurry method is favorable to make high crystalline and dense absorber layer. However, this method has the demerit using the toxic and explosive hydrazine solvent, which has severe limitation for common use. With these considerations, it is highly desirable to develop a robust, easily scalable and relatively safe solution-based process for the fabrication of a high quality CZTS absorber layer. Here, we demonstrate the fabrication of a high quality CZTS absorber layer with a thickness of 1.5~2.0 ${\mu}m$ and micrometer-scaled grains using two different non-vacuum approaches. The first solution-processing approach includes air-stable non-toxic solvent-based inks in which the commercially available precursor nanoparticles are dispersed in ethanol. Our readily achievable air-stable precursor ink, without the involvement of complex particle synthesis, high toxic solvents, or organic additives, facilitates a convenient method to fabricate a high quality CZTS absorber layer with uniform surface composition and across the film depth when annealed at $530^{\circ}C$. The conversion efficiency and fill factor for the non-toxic ink based solar cells are 5.14% and 52.8%, respectively. The other method is based on the nanocrystal dispersions that are a key ingredient in the deposition of thermally annealed absorber layers. We report a facile synthetic method to produce phase-pure CZTS nanocrystals capped with less toxic and more easily removable ligands. The resulting CZTS nanoparticle dispersion enables us to fabricate uniform, crack-free absorber layer onto Mo-coated soda-lime glass at $500^{\circ}C$, which exhibits a robust and reproducible photovoltaic response. Our simple and less-toxic approach for the fabrication of CZTS layer, reported here, will be the first step in realizing the low-cost solution-processed CZTS solar cell with high efficiency.