• Title/Summary/Keyword: Synchronous Q&A

Search Result 194, Processing Time 0.021 seconds

A Fault Diagnosis Technique of an Inverter-fed PMSM under Winding Shorted Turn and Inverter Switch Open Fault (권선 단락 및 스위치 개방 고장 시의 인버터 구동 영구자석 동기전동기의 고장 진단 기법)

  • Kim, Kyeong-Hwa
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.24 no.5
    • /
    • pp.94-105
    • /
    • 2010
  • To detect faults in an inverter-fed permanent magnet synchronous motor (PMSM) drive under the circumstance having faults in a stator winding and inverter switch, an on-line basis fault detecting scheme during operation is presented. The proposed scheme is achieved by monitoring the second-order harmonic component in q-axis current and the fault is detected by comparing these components with those in normal conditions. The linear interpolation method is employed to determine the harmonic data in normal operating conditions. As soon as the fault is detected, the operating mode is changed to identify a fault type using the phase current waveform. To verify the effectiveness of the proposed fault detecting scheme, a test motor to allow inter-turn short in the stator winding has been built. The entire control algorithm is implemented using DSP TMS320F28335. Without requiring an additional hardware, the fault can be effectively detected by the proposed scheme during operation so long as the steady-state condition is satisfied.

Vector Control of SPMSM Using MATLAB/SIMULINK & dSPACE 1104 System (MATLAB/SIMULINK와 dSPACE 1104 시스템을 이용한 표면 부착형 영구자석 동기전동기 벡터제어)

  • Lee, Yong-Seok;Ji, Jun-Keun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.9 no.2
    • /
    • pp.317-326
    • /
    • 2008
  • This paper presents a vector control implementation for SPMSM(Surface-mounted Permanent Magnet Synchronous Motor) using dSPACE 1104 system and MATLAB/SIMULINK. SPMSM can be treated as a DC motor provided that currents of flux and torque component are controlled independently using vector control. Therefore various control algorithms for conventional DC motor control can be adopted to SPMSM. The system is designed to improve set-point tracking capability, fast response, and accuracy In This paper, d-q equivalent modeling of PMSM is derived based on vector control theory. PI controller is used for speed control and decoupling PI controller is used for current control. For the implementation of high performance vector control system, dSPACE 1104 system is used. Experiments were carried out to examine validity of the proposed vector control implementation.

Simulation Model of Harmonics Injection Sensorless Technique for Permanent Magnet Synchronous Motor (영구자석 동기 전동기의 고조파 주입 센서리스 기법 시뮬레이션 모델)

  • Yoon, Jin-Woo;Lee, Dong-Myung
    • Journal of IKEEE
    • /
    • v.24 no.1
    • /
    • pp.67-71
    • /
    • 2020
  • In this study, a simulation model of the harmonic injection sensorless control technique is proposed. This model is suitable for the sensorless technique of low-speed area operation of motors. The motor of this model is permanent magnet motor. For sensorless control, 1kHz square wave is injected. The change in motor constant according to rotor position is realized by having different d-q inductance values. Sensorless techniques is implemented through functions of Simulink and models provided by Simulink libraries. It is shown that the harmonic component contained in the current is extracted using a filter, and the angle of the permanent magnet of the motor is detected using the extracted waveform. The validity of the simulation model is demonstrated through the estimated motor angle waveform and the related waveforms of the motor control applied to the 1kW permanent magnet motor.

Geochronology and Petrogenetic processes of the so-called Hongjesa granite in the Seogpo-Deogku Area (석포(石浦)-덕구간(德邱間)에 분포(分布)하는 소위(所謂) 홍제사화강암(洪濟寺花崗岩)의 지질연대(地質年代)와 생성과정(生成過程)에 대(對)한 硏究(연구))

  • Kim, Yong Jun;Lee, Dai Sung
    • Economic and Environmental Geology
    • /
    • v.16 no.3
    • /
    • pp.163-221
    • /
    • 1983
  • Main aspects of this study are to clarify geochronology and petrogenetic processes of the so-called Hongjesa granite, which is a member of various intrusive rocks exposed in the northeastern part of the Ryongnam Massif, one of the Precambrian basements of South Korea. In this study, the Hongjesa grainte is divided into four rock units based on the geologic age, mineralogical and chemical constituents, and texture: the Precambrian Hongjesa granite gneiss (Hongjesa granite Proper) and leucogranite gneiss, the Paleozoic gnessic two mica granite, and the Jurassic muscovite granite. The Hongjesa granite gneiss is identified by its grayish color, slight foliation, and porphyroblastic texture. The leucogranite gneiss is distinct by its light gray color, sand medium to coarse grained texture. The gneissic two mica granite is distinguished from others by its strong foliation, containing gray-colored feldspar phenocrysts with biotite and muscovite in varying amounts. The muscovite granite occurs as a small stock containing feldspar phenocrysts along margin of the stock. These granitic rocks vary widely in composition, reflecting the facts that they partly include highly metamorphosed xenolith and schlierens as relics of magmatic and anatectic processes. In particular, grayish porphyroblasts of microcline perthite is characteristic of the Hongjesa granite gneiss, whereas epidote and garnet occur in both the Hongjesa granite gneiss and leucogranite gneiss. These minerals are considered to be formed by potassic metasomatism and contamination of highly metamorphosed rocks deeply buried under the level of the Hongjesa granite emplacement. The individual synchronous granitic rocks plotted on Harker diagram show mostly similar trends to the Daly's values. The plots of the Hongjesa granite gneiss and gneissic two mica granite concentrate near the end part of the calc-alkalic rock series on the AMF diagrams, whereas those of the leucogranite gneiss and muscovite granite indicate the trend of the Skaergaard pluton. These granitic rocks plotted on a Q-Ab-Or diagram (petrogeny's residua system) fall well outside the trough of the system. This can be attributed to the potassic matasomatism of these rocks. On the ACF diagram, these rocks appear to be dominantly I-type prevailing over S-type. The K-Ar ages, obtained from a total of 7 samples of the leucogranite gneiss, gneissic two mica granite, muscovite granite, porphyritic alkali granite, and rhyolitic rock, in addition to the Rb/Sr ages of the Hongjesa granite gneiss by previous workers, permit the rock units to be arranged in the following chronological order: The middle Proterozoic Hongjesa granite gneiss (1714-1825 m.y.), the upper proterozoic leucogranite gneiss (875-880 m. y.), the middle Paleozoic gneissic two mica granite (384 m. y.) the upper Jurassic muscovite granite (147 m. y.), the Eocene alkali granite (52 m. y.), and the Eocene rhyolitic rock (45 m. y.). From the facts and data mentioned above, it is concluded that the so-called Hongjesa granite is not a single granitic mass but is further subdivided into the four rock units. The Hongjesa granite gneis, leucogranite gneiss, and gneissic two mica granite are postulated to be either magmatic or parautochtonous, intrusive, and the later muscovite granite is to be magmatic in origion.

  • PDF