• 동력기계공학회지
• /
• 제17권5호
• /
• pp.86-93
• /
• 2013

This paper proposes the used of genetic algorithm for optimizing PI controller and describes the dynamic modeling simulation for the permanent magnet synchronous motor driven by simplified vector control with the aid of MATLAB-Simulink environment. Furthermore, three kinds of error criterion minimization, integral absolute error, integral square error, and integral time absolute error, are used as objective function in the genetic algorithm. The modeling procedures and simulation results are described and presented in this paper. Computer simulation results indicate that the genetic algorithm was able to optimize the PI controller and gives good control performance of the system. Moreover, simplified vector control on permanent magnet synchronous motor does not need to regulate the direct axis component current. This makes simplified vector control of the permanent magnet synchronous motor very useful for some special applications that need simple control structure and low cost performance.

• 전력전자학회논문지
• /
• 제22권1호
• /
• pp.53-59
• /
• 2017

The information on the actual voltages and actual currents of the motor is required for the sensorless control of a permanent magnet synchronous motor without rotor position sensors. In the model-based rotor position estimator of a PM synchronous motor, the reference voltages, which are the outputs of the current controller, are commonly used. The reference voltages in over-modulation regions for high-speed operation differ from the actual voltages applied to the motor. Consequently, the estimated rotor position and rotor speed may fail to track the real rotor position and real rotor speed. In this paper, the sensorless control for a PM synchronous motor in over-modulation regions for high-speed operation is proposed. The three-phase voltages applied to the motor are measured by using additional voltage detection circuits, and the performance of the rotor position estimator based on the measured three-phase voltages is validated through the experimental results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.248-252
• /
• 2002

In this study, a synchronous controller which can be applied to two-axes position synchronization has been developed. The synchronous control system based on coupling structure has been composed of speed and synchronous controller. The speed controller has been designed to fellow speed reference. And the synchronous controller has been designed in the view point of accurate synchronization and robust stability by $H_{\infty}$ approach. The effectiveness of the designed synchronous controller has been demonstrated by experiment.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.977-983
• /
• 2011

This paper proposes a new adaptive speed controller to achieve a robust speed control of a permanent magnet synchronous motor(PMSM). The proposed adaptive regulator does not require any information on the motor parameter and load torque values, so it is very insensitive to model parameter and load torque variations. Also, the stability of the proposed adaptive control system is proven. To validate the robustness of the proposed adaptive speed controller, both simulation and experimental results are provided under motor parameter and load torque variations. It is clearly demonstrated that the proposed adaptive regulator can accurately control the speed of permanent magnet synchronous motors.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.330-337
• /
• 2011

This paper presents a new fuzzy speed controller based on a fuzzy angular acceleration observer to realize a robust speed control of permanent magnet synchronous motors(PMSM). The proposed speed controller needs the information of the angular acceleration, thus the first-order fuzzy acceleration observer is designed. The LMI existence condition is given for the proposed fuzzy speed controller, and the gain matrices of the controller are calculated. It is verified that the augmented control system consisting of the fuzzy speed controller and the fuzzy acceleration observer is mathematically stable. To validate the effectiveness of the proposed acceleration observer-based fuzzy speed controller, the simulation and experimental results are shown under motor parameter variations. It is definitely proven that the proposed control scheme can precisely track the speed of a permanent magnet synchronous motor.

• 한국정밀공학회지
• /
• 제26권9호
• /
• pp.103-111
• /
• 2009

Multi-climbing hydraulic robots are used to lift construction factory (CF) synchronously for applications in the automation of a high-rise building construction. In this study, synchronous motion controller is proposed for the hydraulic robots, whose strategy is not only to make each robot follow the reference path basically by sliding-mode control, but also to synchronize motions of two adjacent cent robots consecutively by cross-coupled control technique. Simulations are performed by using SIMULINK for a system similar to a practical application that includes unbalance in CF and wind disturbance. The results show that the proposed controller significantly reduces synchronous errors, compared to the individual controller for each hydraulic robot.

• 한국전자통신학회논문지
• /
• 제12권1호
• /
• pp.85-92
• /
• 2017

최근, 전기추진시스템은 무인선, 어군탐지선 등에 활용되고 있다. 이 추진시스템 중에는 추진력 향상을 위해 두 대의 전기모터와 프로펠러로 구성된 경우가 있다. 이때 두 프로펠러 간의 속도 차에 해당하는 동기오차는 에너지효율과 침로오차에 영향을 미친다. 본 연구에서는 외란과 동특성 불일치에 의해 발생되는 동기오차를 억제하기 위한 동기제어시스템이 설계된다. 이 제어시스템은 기준모델, 예비필터와 속도제어기, 동기제어기로 구성된다. 기준모델은 추진시스템마다 상호 분리된 동기오차와 제어입력의 계산에 이용된다. 예비필터와 속도제어기는 추진시스템이 오버슈트와 입력포화 없이 지령을 추종하도록 설계된다. 그리고 동기제어기는 안정적이고 신속한 동기화의 관점에서 근궤적법으로 설계된다. 끝으로, 시뮬레이션을 통해 설계된 제어시스템이 외란에 효과적임을 보여준다.

• Journal of Power Electronics
• /
• 제2권2호
• /
• pp.95-103
• /
• 2002

The paper deals with the control of the synchronous reluctance machine without position senser. A method for the computation of the transformation angle out of terminal voltages and currents is presented. The injection of test signals allows operation at zero speed. Fundamental for this control scheme is the angle estimation method over the whole operating range including field-weakening is discussed in detail. The implementation of the angle estimation method in a rotor-oriented control scheme and practical results are demonstrated.

• 한국전자통신학회논문지
• /
• 제13권2호
• /
• pp.349-356
• /
• 2018

본 연구에서는 무인선, 어군탐지선 등의 듀얼 전기추진시스템에서 두 프로펠러 간에 발생되는 속도 차, 즉 동기오차를 억제하기 위한 동기제어시스템이 설계된다. 이 제어시스템은 각 추진시스템에 대한 예비필터와 속도제어기 그리고 추진시스템 간에 교차 결합된 동기제어기로 구성된다. 예비필터와 속도제어기는 추진시스템이 오버슈트와 입력포화 없이 속도지령을 추종하도록 설계된다. 그리고 동기제어기는 비대칭 외란과 동특성 불일치가 동기오차에 미치는 영향을 분석한 후, 동기제어시스템의 감쇠성과 속응성을 고려하여 설계된다. 끝으로, 시뮬레이션을 통해 설계된 제어시스템이 동기오차의 제거에 효과적임을 보여준다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.140-142
• /
• 2006

This paper represents a digital parallel control of a synchronous buck converter using a digital signal processor (DSP). The digital PWM and load sharing controller is implemented in the DSP TMS320F2812 and the experimental results are provided to show the feasibility of the digital synchronous buck regulator.