• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.7
• /
• pp.320-326
• /
• 2003

Slotless Permanent Magnet Linear Synchronous Motor (PMLSM) has good control ability but thrust density is low. So, this paper proposes inserted core type of slotless PMLSM to improve its thrust density. Inserting the core between windings of each phase, detent force is generated by the difference of magnetic resistance in an air gap. To minimize detent force, this paper applies the neural network to inserted core type of slotless PMLSM. The, Magnetic pole ratio, the width of the inserted core and the width of the coil are selected as a design parameter to minimize detent force. In comparison with inserted core type one, thrust ripple greatly decreases by minimizing detent force and also thrust increases in this optimal model.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.2
• /
• pp.83-89
• /
• 2001

This paper introduces a power flow model of SSSC for voltage stability analysis of power system installed with Static Synchronous Compensators. The SSSC model is obtained from the injection model of voltage source inverter by adding the condition that SSSC injection voltage is in quadrature with current of SSSC-installed branch. This model is incorporated into modified CPF algorithm to study effects of SSSC on the security-constrained interface flow limit. Determination of interface flow limit is simply briefed. In case study a 771-bus real system is used to show that interface flow limit can be improved by appropriate control of SSSC in terms of voltage stability.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.191-194
• /
• 2001

In this paper, we propose a series active power filter control method to compensate current harmonics and unbalanced source voltage. The system is composed of series active power filter and shunt passive filer that are tuned 5th and 7th harmonics. In this conventional system, series active power filter complements drawbacks of the shunt passive filter, namely improves harmonic compensation characteristics, and compensates unbalanced source voltage. In the proposed algorithm, compensation voltage for harmonic reduction is calculated by performance function, and compensation voltage for unbalanced source voltage is calculated in based on a synchronous reference frame. So, ultimate compensation voltage is sum of those two compensation voltages. By computer simulation, we verify the excellency of proposed method.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.149-151
• /
• 2001

This paper proposes the design of STATCOM(static synchronous compensator) stabilizer for improving power system stability using fuzzy logic controller(FLC). The STATCOM DC voltage regulator contributes negative damping to the power system as the installation of STATCOM DC voltage regulator. STATCOM stabiliser is superimposed on the AC voltage regulator to compensate the negative damping effect. To evaluate usefulness of the proposed method, we perform the nonlinear simulation on a single-machine infinite bus system. As results of the simulations, the proposed method shows better control performance than PI controller in terms of damping effects.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.625-626
• /
• 2006

This paper presents the new simulation model for the performance analysis of Surface-Mounted Permanent Magnet Synchronous Motor(SMPMSM) Drive System which is integrated with a controller and a power converter. To enhance reusability and compatibility, the system model is expressed by the association of independent sub-modules reflecting the real physical construction. This concept allows another independent sub-module to be effectively inserted in the model for the comprehensive analysis of larger systems such as a Machine Tool and HEV. The developed model which is composed of MATLAB/Simulink's basic blocks can rapidly analyze not only the entire behavior of system, but also the functional relationship between each components for the effective development of controller.

• Proceedings of the KIPE Conference
• /
• 2004.11a
• /
• pp.22-26
• /
• 2004

대용량 동기 발전 전동기 운전에는 주로 사이리스터를 이용한 정지형 주파수 변환장치(SFC : static Frequency Converter)시스템이 널리 사용되고 있다. 본 논문에서는 기술적인 언급이 거의 되어있지 않은 회생제동 시스템의 개선된 제어 알고리즘을 제시하였다. 기술적 언급이 없기 때문에 실제 구동되고 있는 양수 발전소의 실측 파형을 분석하여 알고리즘을 도출하였으며 기존의 회생제동 제어에서 사용되었던 전압센서가 필요 없게 되어 경제적인 절감 효과를 유발하고 또한 제어요소의 간략화로 제어의 강인성을 확보하였다. 그리고 실험을 통하여 실효성 및 타당성을 검증하였다.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1188-1194
• /
• 2008

To cope with the demagnetization risk of permanent magnets used in Interior Permanent Magnet Synchronous Motors(IPMSM), an accurate iron analysis and thermal analysis are very important. In this research, to calculate thermal increment of IPMSM for high-speed traction motor, we will extract losses of IPMSM considering the condition of field weakening control. Then we will input the calculated losses such as iron loss and copper loss as the thermal sources. Based on magnetic filed and thermal analysis, we will support the design of IPMSM for high-speed train.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.390-391
• /
• 2018

본 논문은 직류단 전원을 공유하는 복수의 인버터로 구성된 시스템에서 EMI 저감을 위한 연동제어 PWM 생성 기법을 제안한다. PWM 제어에 의한 스위칭시 전력단 중성점에서 커먼모드 전압이 생성되고, 기생 캐패시터를 통해 전원라인으로 유입되어 EMI 노이즈가 발생된다. 복수의 인버터 시스템에서도 동일한 현상이 나타나고, 이로인한 불특정한 커먼모드 전류가 발생한다. 본 논문에서는 2개의 인버터를 PWM 시점의 동기제어를 통해 커먼모드 노이즈를 상쇄하고자한다. 제안한 제어 기법을 검증하기 위하여 시뮬레이션으로 분석하며, 간이 실험 통해 검증한다.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.66-68
• /
• 2018

6상 전동기는 높은 신뢰성과 토크 리플의 저감 등의 성능 이점으로 인해 다양한 산업 분야에서 고려되고 있다. 6상 전동기는 일반적으로 두 3상 권선의 형태로 모델링할 수 있으며, 독립된 두 개의 전류 제어기를 사용하는 경우, 두 3상 권선 간의 상호 간섭 인덕턴스의 영향으로 인하여 불안정해지는 특성이 있다. 안정적인 전동기 구동을 위하여, 비대칭 6상 전동기의 상호 간섭 영향을 최소화하는 전류 제어기가 필요하다. 이를 위해, 본 연구에서는 이산 영역에서의 6상 전동기의 전류 제어 폐루프 응답 특성을 분석하고 비간섭 (Decoupling) 전류 제어기 구조를 제시한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.6
• /
• pp.28-34
• /
• 2011

This paper describes the development of the transient analysis model of 345[kV] 100[MVA] STATCOM and the result of the performance analysis. The Korea power utility company, KEPCO began a commercial operation of a 100[MVA] STATCOM(Static synchronous COMpensator) at 345[kV] Migeum substation in Seoul. In order to operate a new control device like STATCOM to the power system, suitable transient model is needed. Therfore, Korea Electric Power Coporation(KEPCO) developed a transient analysis models using EMTDC/PSCAD. The development of this transient analysis model is based on the actual STATCOM S/W algorithm and H/W specification that was provided by its manufacture. Through this model, the transient/dynamic performance of STATCOM at Migeum substation can be analyzed.