• Journal of ILASS-Korea
• /
• v.15 no.2
• /
• pp.53-60
• /
• 2010

This study presents development of digital particle holographic system and its application to spray field to measure three-dimensional velocities and sizes of spray droplets. A double exposure hologram recording system with synchronization system for time control was established and digital holograms can be recorded in a short time interval. To process recorded holograms, the correlation coefficient method was used for focal plane determination of particles. To remove noises and improve the quality of holograms and reconstructed images, the Wiener filter was adopted. The two-threshold and image segmentation methods were used in binary image transformation. For particle pairing, the match probability method was adopted. The developed system was applied to spray field and three-dimensional velocities and sizes of spray droplets were measured. The measurement results of digital holographic system were compared with those made by laser instruments, PDPA(Phase Doppler Particle Analyzer), which proved the feasibility of in-line digital particle holographic system as a good measurement tool for spray droplets.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.3
• /
• pp.139-146
• /
• 2018

In recent years, a satellite navigation signal authentication technique has been introduced to determine the spoofing of commercial C/A code using the cross-correlation mode of GPS P(Y) code received at two receivers. This paper discusses the technical considerations in the implementation and application of authentication system simulator hardware to achieve the above technique. The configuration of the simulator consists of authentication system and user receiver. The synchronization of GPS signals received at two devices, data transmission and reception, and codeless correlation of P(Y) code were implemented. The simulation test result verified that spoofing detection using P(Y) codeless correlation could be achieved.

• MALSORI
• /
• no.59
• /
• pp.69-87
• /
• 2006

Among the conventional time-scale modification (TSM) methods, the synchronized overlap and add (SOLA) method is widely used due to its good performance relative to computational complexity But the SOLA method remains complex due to its synchronization procedure using the normalized cross-correlation function. In this paper, we introduce a computationally efficient SOLA method utilizing 3 level center clipping method, as well as zero-crossing and level-crossing information. The result of subjective preference test indicates that the proposed method can reduce the computational complexity by over 80% compared with the conventional SOLA method without serious degradation of synthesized speech quality.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.1
• /
• pp.32-36
• /
• 2011

In this study, authors have proposed the autonomous state estimation which has been composed with IEC61850, GPS time synchronization and objective model design concept. The proposed method is able to supervise/correct measurement and communication error from SCADA. The major advantages of the proposed autonomous state estimation are that it is possible to evaluate integrity of data measured and transferred from SCADA, to reduce human intervention and to expense national-size applications such as EMS (Energy Management System), WAMS (Wide Area Monitoring System) or WAPS (Wide Area Protection System). This study addresses the issues related to the operation of the smart grid and proposes a new automated approach to achieve this goal. Through applying the proposed system to IEEE 14-bus test electric system, we prove the possibility of the proposed idea.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1675-1682
• /
• 2014

In this paper, we propose a precise time management and time synchronization based on real-time data storage and transmission scheme in design of seismic data acquisition system for urban earthquake disaster preventing system (UEDPS). It is possible to improve the performance of the existing research results through the proposed methods. To evaluate the performances of the proposed methods, we implemented a prototype system(H/W & S/W) and performed some experiments with real seismic data and test equipment generated data as the input.

• Journal of Information Processing Systems
• /
• v.10 no.3
• /
• pp.412-428
• /
• 2014

Request oriented sensor networks have stricter requirements than conventional event-driven or periodic report models. Therefore, in this paper we propose a minimum energy data aggregation (MEDA), which meets the requirements for request oriented sensor networks by exploiting a low power real-time scheduler, on-demand time synchronization, variable response frame structure, and adaptive retransmission. In addition we introduce a test bed consisting of a number of MEDA prototypes, which support near real-time bidirectional sensor networks. The experimental results also demonstrate that the MEDA guarantees deterministic aggregation time, enables minimum energy operation, and provides a reliable data aggregation service.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.3
• /
• pp.153-168
• /
• 1998

In this study we consider a CONWIP system in which the processing times at each station follow an exponential distribution and the demands for the finished Products arrive according to a compound Poisson process. The demands that are not satisfied instantaneously are assumed to be backordered. For this system we develop an approximation method to obtain the performance measures such as steady state probabilities of the number of parts at each station, the proportion of backordered demands, the average number of backordered demands and the mean waiting time of a backordered demand. For the analysis of the proposed CONWIP system, we model the CONWIP system as a closed queueing network with a synchronization station and analyze the closed queueing network using a product form approximation method. A matrix geometric method is used to solve the subnetwork in the application of the product-form approximation method. To test the accuracy of the approximation method, the results obtained from the approximation method were compared with those obtained by simulation. Comparisons with simulation have shown that the approximate method provides fairly good results.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1020-1023
• /
• 2009

A purpose of this study measure the acceleration of operating KTX high speed train to find out something wrong to obtain reliable the acceleration measurement data. The existing measurement system come about a difference between measurement data of running off the track with the acceleration measurement data of operating KTX high speed train. Therefore, the measurement system needs make up for the weak points in the current system. This study analyze existing measurement system and the acceleration measurement data to introduce the synchronization of the existing measurement system and the acceleration measurement and will be reasonable to this sampling through field test.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.545-553
• /
• 2014

This paper proposes an algorithm to sense orthogonal frequency-division multiplexing (OFDM) signals in cognitive radio (CR) systems. The basic idea behind this study is when a primary user is occupying a wireless channel, the covariance matrix is non-diagonal because of the time domain cross-correlation of the cyclic prefix (CP). In light of this property, a new decision metric that measures the power of the data found on two minor diagonals in the covariance matrix related to the CP is introduced. The impact of synchronization errors on the signal detection is analyzed. Besides this, a likelihood-ratio test is proposed according to the Neyman-Pearson criterion after deriving probability distribution functions of the decision metric under hypotheses of signal presence and absence. A threshold, subject to the requirement of probability of false alarm, is derived; also the probabilities of detection and false alarm are computed accordingly. Finally, numerical simulations are conducted to demonstrate the effectiveness of the proposed algorithm.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.05a
• /
• pp.129-133
• /
• 2005

This paper describes the methodology of connecting MASTER (Multi-purpose Analyzer for Static and Transient Effects of Reactors) to simulator system, system configuration, and previous test. The actual simulator environment for Youngkwang Unit1 has been developed. It is impossible for the simulator server to execute MASTER code by limitation of computer performance. So, environment of distributed system was developed, and it had a synchronization task. As MASTER and simulator module should be synchronized in different device, the connection of communication was tested and verified.