• 조명전기설비학회논문지
• /
• 제24권5호
• /
• pp.44-54
• /
• 2010

SynRM 효율최적화 제어는 다른 교류전동기에 비해 SynRM의 효율이 낮기 때문에 에너지 절약과 환경보존의 관점에서 매우 중요하다. 본 논문에서는 다중 AFLC를 이용하여 철손을 고려한 SynRM의 새로운 효율 최적화 제어를 제안하였다. 최대효율에서 SynRM을 구동하기 위해 토크전류와 여자전류사이의 최적전류비를 분석하여 구한다. 본 논문에서는 동손과 철손을 최소로 하는 SynRM의 효율 최적화 제어를 제안하였다. 특정한 모터토크를 제공하는 d축과 q축 전류의 다양한 조합이 존재한다. 효율 최적화의 목적은 정상상태에서 최소 손실을 제공하는 d축과 q축 전류의 조합을 찾는 것이며, 제안된 제어기의 제어 성능은 다양한 동작조건의 분석을 통해 평가되었다. 분석된 결과는 제안된 알고리즘의 타당성을 입증한다.

• Journal of Magnetics
• /
• 제15권2호
• /
• pp.85-90
• /
• 2010

This paper deals with the efficiency evaluations in a synchronous reluctance motor (SynRM) versus a permanent magnet assisted SynRM (PMASynRM), using a coupled transient finite element method (FEM) and Preisach modeling, which is presented to analyze the characteristics under the effects of saturation and hysteresis loss. We herein focus on the efficiency evaluation relative to hysteresis loss and copper loss on the basis of load conditions in a SynRM and PMASynRM. Computer simulation and experimental results for the efficiency, using a dynamometer, show the propriety of the proposed method and the high performance of the PMASynRM.

• 조명전기설비학회논문지
• /
• 제25권4호
• /
• pp.30-37
• /
• 2011

Recently, SynRM has been focused by many researchers and there has been a lot of works for the industrial application of SynRM. In spite of several merits of SynRM, the information of exact rotor position is also required to perform the precise torque control, which causes the increment of cost and demerits SynRM to use in industrial application. Therefore, we studied sensorless control algorithm for the torque control of SynRM to overcome the demerits. Specially we proposed simple algorithm to estimate rotor position using trigonometric function, verified with computer simulation and experiment.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.359-362
• /
• 2009

Optimal efficiency control of synchronous reluctance motor(SynRM) is very important in the sense of energy saving and conservation of natural environment because the efficiency of the SynRM is generally lower than that of other types of AC motors. This paper is proposed a novel efficiency optimization control of SynRM considering iron loss using multi adaptive fuzzy learning controller(AFLC). The optimal current ratio between torque current and exciting current is analytically derived to drive SynRM at maximum efficiency. This paper is proposed an efficiency optimization control for the SynRM which minimizes the copper and iron losses. There exists a variety of combinations of d and q-axis current which provide a specific motor torque. The objective of the efficiency optimization control is to seek a combination of d and q-axis current components, which provides minimum losses at a certain operating point in steady state. The control performance of the proposed controller is evaluated by analysis for various operating conditions. Analysis results are presented to show the validity of the proposed algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.776_777
• /
• 2009

Optimal efficiency control of synchronous reluctance motor(SynRM) is very important in the sense of energy saving and conservation of natural environment because the efficiency of the SynRM is generally lower than that of other types of AC motors. This paper is proposed a novel efficiency optimization control of SynRM considering iron loss using neural network(NN). The optimal current ratio between torque current and exciting current is analytically derived to drive SynRM at maximum efficiency. This paper is proposed an efficiency optimization control for the SynRM which minimizes the copper and iron losses. The design of the speed controller based on adaptive learning mechanism fuzzy-neural networks(ALM-FNN) controller that is implemented using fuzzy control and neural networks. The objective of the efficiency optimization control is to seek a combination of d and q-axis current components, which provides minimum losses at a certain operating point in steady state. The control performance of the proposed controller is evaluated by analysis for various operating conditions. Analysis results are presented to show the validity of the proposed algorithm.

• 전자공학회논문지SC
• /
• 제39권6호
• /
• pp.59-70
• /
• 2002

본 논문에서는 최적 효율과 고성능으로 동작하는 SynRM(Synchronous Reluctance Motor)을 위한 위치 및 속도 센서리스 벡터제어를 제시한다. 제시한 제어 방법은 고정자 전압과 전류의 자속 추정에 기초한다. 그리고 동손과 철손을 최소화하는 효율 최적화의 전류각 조건은 SynRM의 등가회로를 기초로 유도한다. 폐루프 위치 및 속도 제어의 연구결과는 최적화 제어의 입증하였다.

• 조명전기설비학회논문지
• /
• 제24권5호
• /
• pp.16-28
• /
• 2010

본 논문은 AIPI 및 ANN에 의한 SynRM 드라이브의 최대토크 제어를 제시한다. 본 논문은 인버터의 정격 전압과 전류의 한계 조건을 고려하여 전 속도영역에서 최대토크제어를 제시한다. 속도에 따라 각 제어모드에서 최대토크를 발생하기 위한 최적의 전류값을 계산하고. 계산된 최적전류를 이용하여 최대토크 제어를 수행한다. 제시된 최대토크 제어 알고리즘은 AIPI와 ANN 제어기와 함께 SynRM 드라이브에 적용하여 동작특성을 분석하고 그 타당성을 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1089-1091
• /
• 2005

본 논문은 PMASynRM과 SynRM의 토크, 속도응답, 효율등을 실험을 통해 비교분석 하였다. 이러한 비교는 같은 조건상태에서의 PMASynRM이 SynRM보다 성능이 저가의 영구자석(ferrite)을 삽입함으로서 개선됨을 확인 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.756_757
• /
• 2009

This paper deal with the efficiency evaluations in a Synchronous reluctance motor(SynRM) Vs. PMASynRM using a coupled transient finite element methed(FEM) and preisach modeling, which is presented to analyze the characteristics under the effect of saturation and hysteresis loss. The focus of this paper is the efficiency evaluation relative to hysteresis loss, copper loss, etc. on the basis of load condition in a SynRM and PMASynRM. Computer simulation and experimental result for the efficiency using dynamometer shoe the propriety of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1092-1094
• /
• 2005

This paper deal with the efficiency evaluations in a Synchronous reluctance motor(SynRM) Vs. PMASynRM using a coupled transient finite element method(FEM) and preisach modeling, which is presented to analyze the characteristics under the effect of saturation and hysteresis loss. The focus of this paper is the efficiency evaluation relative to hysteresis loss, copper loss, etc. on the basis of load condition in a SynRM and PMASynRM. Computer simulation and experiment at result for the efficiency using dynamometer shoe the propriety of the proposed method.