• The Korean Journal of Malacology
• /
• v.31 no.1
• /
• pp.49-59
• /
• 2015

Eight species of the family Bithyniidae, Bithynia striatula, B. tentaculata, B. siamensis, B. leachi, B. kiusiuensis, B. misella, Bithynia sp. from Nepal, and Gabbia australis were studied for comparison of the radula structure by scanning electron microscope. Radular ribbons of B. siamensis and B. leachi had 60-70 rows, and the other species had 40-50 rows. Teeth of all species studied had symmetrical structure, i.e. a total of seven teeth (one central tooth, and one lateral and two pairs of marginal teeth on each side) in each row were observed. The basic tooth formula of eight bithyniids was 2:1:1:1:2. Numbers and shapes of cusps were slightly differ from individuals or species. The mesocone of the central tooth of B. striatula, B. tentaculata, B. siamensis and Bithynia sp. differed from those of the other species observed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.315-324
• /
• 2017

The smart grid with distributed power supply introduces a number of problems including not only the problems of the existing power grid but also the problem of protection co-operation due to new electric phenomenon because it has a mixed operation structure combining the existing radial operation structure and the new loop operation structure. The EMTP based power system analysis method has flexibility and convenience from the view of system configuration but it requires another experimental verification because of uncertainty of design and analysis results. On the other hand, the real demonstration system has difficulties in observing accurate fault on large scale system due to considerable economical and spatial construction cost, system configuration constraint, and it is difficult to demonstrate the distributed, autonomous and adaptive control strategy of smart grid. In this paper, a basic theory for a micro smart grid simulator design using MEMS(Micro Electro-Mechanical Systems) miniaturization technology is studied which can safely and freely experiment and observe electrical phenomena, and distribution, autonomous adaptive control strategy for disturbances on 22.9kV smart grid under minimum economic and spatial cost.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1745-1751
• /
• 2010

In this paper, a small broadband dipole antenna that simultaneously satisfies DCS1800/PCS/WCDMA/WLAN is designed and fabricated. To reduce the size and to improve the bandwidth of planar microstrip dipole antenna, a new symmetric double-ring radiator structure is used. An antenna can be reduced with increasing effective current length of dipole, and can be obtained a wide band impedance characteristic with decreasing reactance component by using a novel symmetrical double-ring structure. The proposed antenna shows broadband characteristic of 1.07GHz(52%) from 1.5GHz to 2.57GHz with VSWR < 2 (${\leq}-10dB$).

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.299-304
• /
• 2020

This paper proposes the design of circular sector shaped power divider-combiner with a planar structure. This structure can be constructed in series, and due to the circular sector shape, it is possible to simplify circuit configuration and improve the amplitude and phase balanced characteristics of the output. It has a simple input matching circuit and an RC parallel circuit was inserted between the output ports to improve the reflection coefficient and isolation of the output. Since the designed divider-combiner are structurally designed in a symmetrical shape of a sector, even if the output ports are composed of two or four output ports, they have excellent characteristics with an amplitude balance of ± 0.1 dB and a phase balance of ± 1o between outputs. To prove these characteristics, it was confirmed that the characteristics of the planar power divider-combiner fabricated at an operating frequency of 2 GHz are in good agreement with the simulation.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.145-156
• /
• 2012

These days, the application of electronic power transformers (EPTs) is expanding in place of ordinary power transformers. These transformers can transmit power via three or four wire converters. Their dynamic performance is extremely important, due to their complex structure. In this paper, a new method is proposed for improving the dynamic performance of distribution electronic power transformers (DEPT) by using sliding mode control (SMC). Hence, to express the dynamic characteristics of a system, different factors such as the voltage unbalance, voltage sag, voltage harmonics and voltage flicker in the system primary side are considered. The four controlling aims of the improvement in dynamic performance include: 1) maintaining the input currents so that they are in sinusoidal form and in phase with the input voltages so they have a unity power factor, 2) keeping the dc-link voltage within the reference amount, 3) keeping the output voltages at a fixed amount and 4) keeping the output voltages in sinusoidal and symmetrical forms. Simulation results indicate the potential and capability of the proposed method in improving DEPT behavior.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.227-233
• /
• 2001

Electromagnetic field characteristics of Reverberation chamber, which could be applicable for an alternative test facility of electromagnetic interference and radiated electromagnetic susceptibility have been investigated. To obtain the required field uniformity of reverberation chamber, Schroeder method Quadratic Residue Diffuser was designed to be applied to chamber. In this paper, 3 different types of diffusers depending on diffuser's periodic direction have been used to investigate field characteristics of each type by using FDTD numerical method. The results show all 3 types of reverberation chambers have below $\pm$3 dB tolerance of field uniformity characteristics, and the symmetrical, type 3, structure show better results among them.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.399-405
• /
• 2003

We manufactured a clamp-type optical current transformer (COCT) head using FD10 glass. It was manufactured of two parts of FD10 glass with symmetrical structure and was designed so that light propagates along the critical angle in order to avoid a phase difference with the light within the sensor head at reflection. Also, we measured and analyzed the current of conductor from 0 to 1,000 AT, change of optical power with incidence angle of light, temperature and polarization of light, long-term current measurement using COCT head, and demonstrated the feasibility of manufactured COCT through those experiments.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2011.04a
• /
• pp.97-102
• /
• 2011

The characteristics of traditional Thai houses are post-and-beam structure, lifted floor on pillars, and gabled roof as like as houses in other Southeast Asia countries. However 'charn', connective terrace among each room, is the most unique element in Thai houses which make the area under the 'charn' cool and useful. In Thailand, there are number of housing types caused by historic, social, cultural and geographic factors. This research is focused on comparative study of planning of traditional Thai houses of central and northern region, which have the biggest differences in between. Thai traditional house in central region has symmetrical arrangement on layout and when family members are added, they extend 'charn' and attach another building. While in Northern region, the 'charn' is located not in the center and in the front, and the direction of the main building is perpendicular to the length direction of the veranda. This research has a limitation to be generalized because just two region in Thailand were analyzed and the numbers of case studies were few. Nevertheless, we expect this paper to be a primary guidance to understand Thai traditional houses and we also expect that our research area will cover the all areas in Thailand and finally expand to conclude the commonality and diversity of traditional houses in Southeast Asia in the future.

• Journal of the Korean association of regional geographers
• /
• v.20 no.1
• /
• pp.30-48
• /
• 2014

Relying on the interaction indices - dominance index, relative strength index and entropy index, this paper analyzes the structural features of urban network in the Seoul metropolitan area with the flows of commuting, business, and freight. Analytical results show that the Seoul metropolitan urban system is vertical, size-dependent, one-way, and the highest city-dominant network rather than horizontal, size-neutral, two-way, complementary one. The network of freight flow is a little bit more symmetrical than the networks of commuting and business. However, the interaction with Seoul is still determinant in all aspects of hierarchical structure, relative strength, and symmetry of flow.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.1
• /
• pp.308-320
• /
• 2016

Although the face almost always has an axisymmetric structure, it is generally not symmetrical image for the face image. However, the mirror image of the face image can reflect possible variation of the poses and illumination opposite to that of the original face image. A robust minimum squared error classification (RMSEC) algorithm is proposed in this paper. Concretely speaking, the original training samples and the mirror images of the original samples are taken to form a new training set, and the generated training set is used to perform the modified minimum sqreared error classification(MMSEC) algorithm. The extensive experiments show that the accuracy rate of the proposed RMSEC is greatly increased, and the the proposed RMSEC is not sensitive to the variations of the parameters.