• 한국전자파학회논문지
• /
• 제16권1호
• /
• pp.78-83
• /
• 2005

본 논문에서는 적층 Inter-digital 공진기를 이용한 LTCC 대역통과 여파기의 등가회로를 제안하고, 2.4 GHz 대역의 여파기 설계에 적용하였다. 본 논문의 LTCC 적층 칩 대역통과 여파기는 평면상에서는 Comb-line 구조이고 단면상에서는 Inter-digital 구조로 구성된다. Comb-line 구조와 Inter-digital 구조의 평행 결합선로의 등가회로를 본 논문의 여파기에 적용하여 여파기 전체의 등가회로를 구성하였다. 이 등가회로는 공진기 사이의 결합 구조가 다중의 결합 구조를 갖는다. 이를 하나의 결합 구조로 통합하여 인버터를 이용한 대역통과 여파기의 설계방법을 적용하였다. 2.4 GHz 대역에서 3단의 대역통과 여파기를 설계, 제작하였다.

• 한국항해항만학회지
• /
• 제30권7호
• /
• pp.607-610
• /
• 2006

A new compact microstrip low-pass filter and its equivalent-circuit model are developed. The philosophy of the structure behind this novel microstrip low-pass filter is simple as it is composed of a pair of symmetrical parallel coupled-line and an open-stub. With this configuration, a finite attenuation pole near the stopband cutoff frequency is available and adjustable by simply tuning the circuit parameters. Furthermore, the rejection bandwidth of this type of low-pass filter can be extended. In order to validate the feasibility of the proposed design method, a low-pass filter based on a microstrip structure is designed, fabricated, and measured. Experimental results agree very well with the simulation and analytical results.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.79-84
• /
• 2006

A novel design of compact low-pass filter based on microstrip structure and its equivalent-circuit model are developed. The philosophy of the structure behind this novel microstrip low-pass filter is simple as it is composed of a pair of symmetrical parallel coupled-line and an open-stub. With this configuration, a finite attenuation pole near the stopband cutoff frequency is available and adjustable by simply tuning the circuit parameters. Furthermore, the rejection bandwidth of this type of low-pass filter can be extended. In order to validate the feasibility of the proposed design method, a low-pass filter based on a microstrip structure is designed, fabricated, and measured. Experimental results agree very well with the simulation and analytical results.

• Journal of electromagnetic engineering and science
• /
• 제6권3호
• /
• pp.171-175
• /
• 2006

In this paper, a new semi-lumped low-pass filter with three finite attenuation poles at stopband is presented. The new structure is composed of a pair of symmetrical parallel coupled-line and a shunted capacitor. With this configuration, three finite attenuation poles can be available for 2nd, 3rd, and 4th harmonics suppression. The research method is based on transmission-line model for tuning the attenuation poles. In order to examine the feasibility of the proposed structure, a low-pass filter based on microstrip structure with harmonics suppression is designed, fabricated, and measured. The experimental results of the fabricated circuit agree well with the simulation and analytical ones.

• ETRI Journal
• /
• 제36권2호
• /
• pp.286-292
• /
• 2014

This paper presents a compact structure composed of an upper high-impedance transmission line, a middle extended parallel coupled line, and a pair of inter-coupled symmetrical stepped impedance stubs. Detailed investigation into this structure based on an equivalent circuit analysis reveals that this proposed structure exhibits a quasi-elliptic low-pass filtering response with three transmission zeros. Moreover, the positions of the three transmission zeros can be tuned and reallocated flexibly by choosing the proper circuit parameters. Finally, the design concept is validated through the design, fabrication, and measurement of two exemplary low-pass filters (LPFs) with one single unit and two cascaded asymmetric units. The measured results agree well with the simulated results. In addition, in the range of $1.42f_c$ to $7.03f_c$, the fabricated quasi-elliptic LPFs experimentally demonstrate a very wide upper-stopband of 20 dB using a compact size of only $0.0089{\lambda}_g{^2}$, where ${\lambda}_g$ is the guided wavelength of a $50{\Omega}$ transmission line at the central frequency.

• 한국전자파학회논문지
• /
• 제14권10호
• /
• pp.1004-1010
• /
• 2003

본 논문에서는 유한한 도체 두께를 갖는 결합선로를 이용하여 1/4파장 역방향 방향성 결합기를 설계하였다. 방향성 결합기를 구성하는 유한 도체 두께를 갖는 결합선로를 해석하기 위한 방법으로 간단하고 빠른 수치해석 방법인 모드정합법을 사용하였다. 본 논문의 해석 결과는 도체 두께를 고려한 역방향 방향성 결합기의 설계가, 도체 두께를 고려하지 않고 설계한 경우 기존에 알려졌던 단점들인 약한 결합특성, 낮은 지향성, 그리고 비현실적인 결합선로의 폭을 극복할 수 있음을 보여준다. 또한, 수치해석 결과로부터 l/4파장 역방향 방향성 결합기에서는 도체 두께의 고려로 강한 결합특성을 만드는 것이 가능하지만, 결합길이가 약간 길어진다는 사실을 확인하였다. 본 논문에서 해석한 유한한 도체 두께는 역방향 방향성 결합기의 새로운 설계 변수로서 사용이 가능하며, 아울러 다양한 마이크로파 집적회로의 설계에도 응용이 가능함을 보여준다.