• 대한산업공학회지
• /
• 제33권1호
• /
• pp.44-51
• /
• 2007

The purpose of this study was to identify the relationship between the cumulative fatigue of trunk muscles andthe period of recovery time during repetitive lifting and lowering tasks with symmetric and asymmetric postures.Ten subjects participated in the experiment. Subjects had 1, 2, 3, 4 and 5 minutes recovery time respectivelywhile they were performing the lifting and lowering task repeatedly for 3 minutes with the weight equivalent to25% level of MVC. EMG signals from ten trunk muscles were collected and the fatigue level was analyzedquantitatively. In results, the local muscle fatigue was no longer accumulated when 5 minutes recovery time wasgiven in symmetric position. For asymmetric position, it took longer minutes to prevent the fatigue accumul-ation. Different trunk muscles indicated slightly different recovery patterns in terms of MPF (Mean Powerfrequency) value.This result would help ergonomist design the length of recovery time to control the cumulative fatigue of trunkmuscles in industry with repetitive lifting and lowering task.

• Safety and Health at Work
• /
• 제4권2호
• /
• pp.105-110
• /
• 2013

Background: To determine the influence of lifting speed and type on peak and cumulative back compressive force (BCF) and shoulder moment (SM) loads during symmetric lifting. Another aim of the study was to compare static and dynamic lifting models. Methods: Ten male participants performed a floor-to-shoulder, floor-to-waist, and waist-to-shoulder lift at three different speeds [slow (0.34 m/s), medium (0.44 m/s), and fast (0.64 m/s)], and with two different loads [light (2.25 kg) and heavy (9 kg)]. Two-dimensional kinematics and kinetics were determined. A three-way repeated measures analysis of variance was used to calculate peak and cumulative loading of BCF and SM for light and heavy loads. Results: Peak BCF was significantly different between slow and fast lifting speeds (p < 0.001), with a mean difference of 20% between fast and slow lifts. The cumulative loading of BCF and SM was significantly different between fast and slow lifting speeds (p < 0.001), with mean differences ${\geq}80%$. Conclusion: Based on peak values, BCF is highest for fast speeds, but the BCF cumulative loading is highest for slow speeds, with the largest difference between fast and slow lifts. This may imply that a slow lifting speed is at least as hazardous as a fast lifting speed. It is important to consider the duration of lift when determining risks for back and shoulder injuries due to lifting and that peak values alone are likely not sufficient.

• 대한인간공학회지
• /
• 제14권1호
• /
• pp.1-7
• /
• 1995

In this paper, the effectiveness and accuracy of using the direct estimation method were investigated in determining a worker's lifting capacity or the maximum acceptable weight of lifting (MAWOL) of symmetrical fifting tasks in the workplace were investigated. Six lifting tasks involving two vertical fifting start-end points (0-80cm, 47-102cm) and three lifting frequencies (1, 2, and 4 lifts/minute) were studied. Ten young, male subjects performed the six lifting tasks to predict the MAWOL using the psychophysical method and the direct estimation method. The main results indicated that there were no significant differences between the MAWOLs determined by the two methods except for the lifting frequency of 4 lifts/minute. Analysis of variance was performed on the task rating data to check the consistency of the task rating across subjects, which revealed no significant difference.

• 대한인간공학회지
• /
• 제25권2호
• /
• pp.11-22
• /
• 2006

The muscular-skeletal disorders(MSDs) that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. Eight male college students were recruited as participants. Three different lifting frequencies(1, 3, 5 lifts/min) and three twisting angles(including the sagittal plane and two asymmetric angles; i.e., 0°, 45°, 90°) for symmetric and asymmetric tasks, respectively, with three lifting range from floor to knuckle height, knuckle to shoulder, floor to shoulder height for one hour's work shift using free style lifting technique were studied. The maximum acceptable weight of load(MAWL) was determined under the different task conditions, and the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWLs. The results showed that: (1) The MAWLs were significantly decreased as the task frequency and task angle increased.; (2) The heart rate, oxygen consumption, RPE significantly increased with an increase in lifting frequency although maximum acceptable weight of lift decreased.; (3) The highest heart rate and oxygen consumption was recorded at the lifting range of floor to shoulder, followed by floor to knuckle and knuckle to shoulder.; (4) The RPE value showed that subjects perceived more exertion at the high frequency rate of lifting task and lifting range of floor to shoulder height. (5) The modeling for MAWL using isometric strength, task angle and lifting frequency were developed. It is expected that use of the results provided in this study may prove helpful in reducing MMH hazards, especially from lifting tasks for Korean, and can be used as a basis for pre-employment screening.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.86-89
• /
• 2003

타일링을 통해 손실 압축된 데이터에 대해 점대칭 확장(point symmetric extension)을 사용하면 경계에서의 인공물(artifact)들을 줄일 수 있다 실제 확장 샘플 없이 경계 필터(boundary filter)를 사용하는 것과 같은 효과를 내는 방법을 리프팅(lifting)을 사용하여 수행할 수 있다. 본 논문에서 사용된 필터는 PR 특성을 준수하고, 경계근처에서 어떠한 후처리 기술이나 이웃하는 타일들로부터의 추가정보 없이 경계 인공물들을 현저히 감소시켰다.

• 대한인간공학회지
• /
• 제28권3호
• /
• pp.41-47
• /
• 2009

The purpose of this study, during the lifting task was researching the difference and a relationship between the ground reaction force and the grip strength by change of position. After grip strength has measured in symmetry position and asymmetry position at 45cm and 75cm of height of hand, ground reaction force was measured by same attitude lifting wooden box. We analyzed the difference of grip strength and ground reaction force in each position change. The results of grip strength, the grip strength of both hand were significant difference that in study subject symmetry and asymmetry position (p<0.01). The results of symmetry lifting task, the study subjects was significant difference of the ground reaction force difference by height (p<0.05). Asymmetry lifting task was significant difference of ground reaction force difference by direction of rotation was changed (p<0.01). The result of it will rotate with non-dominant hand side of lifting tasks from height 75cm where it easily maintains a balance possibility and decreasing the load of the hand. Therefore, from the workshop in the work people, it will be between the height 75cm and non-dominant hand side of trunk rotatory direction in the lifting tasks. Future study is necessary researched about the change of grip strength when the height of the hand is higher, and the difference of the ground reaction force when the change of weight.

• 한국인터넷방송통신학회논문지
• /
• 제23권6호
• /
• pp.75-80
• /
• 2023

미래의 무선과 휴대용 계산 응용에서 DCT 대체할 수 있는 가역적인 블록 변환의 구현을 제시하였다. 이것을 binDCT라 불린다. BinDCT에서 정방향과 역방향 변환들은 이진 천이와 더하기 연산으로 구현될 수 있다. 그리고 binDCT는 바람직한 DCT 특징인(고코딩이득, DC손실 없음, 대칭적인 기저함수, 재귀적 구성)을 유지한다. 또한 binDCT는 lifting 특징인(빠른 구현, 가역적인 정수대정수 매핑, 내부 계산)을 유지한다. 따라서 복잡한 DCT 연산을 보다 빠르게 실행할 수 있는 장점을 가진다. 이 논문에서는 DCT와 binDCT의 계산비용과 성능분석을 Shapiro의 EZW을 사용하여 제시하였다.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4629-4635
• /
• 2012

본 연구의 목적은 중량물 들기 작업시 비대칭 무게중심과 상체 옆으로 기울임 여부가 어떻게 L5/S1 주변 허리 근육의 Peak EMG 진폭에 영향을 미치는지를 알아보는 것이다. 요통을 포함한 근골격계질환은 무겁지 않은 물체의 지속적인 반복 취급뿐만 아니라, 일회성의 커다란 부하도 신체 조직의 부담으로 작용하여 발생할 수 있다. 11명의 20대 대학생 남성은 15.8kg의 물체를 들어올리는 Task를 3회 실행하였다. 이 때 대칭 무게중심의 물체를 상체를 기울이지 않고 들어 올리는 경우, 비대칭 무게중심의 물체를 상체를 기울이지 않고 들어 올리는 조건, 그리고 비대칭 무게중심의 물체를 상체를 기울여서 들어 올리는 경우에 따라 6개의 L5/S1 주변의 근육들로부터 Peak EMG 진폭이 수집되어 분석되었다. 결과는 비대칭 무게중심을 지닌 물체 취급시 무게중심에서 먼 쪽의 허리 근육에서 Peak EMG 진폭이 발생하고, 그 진폭의 크기는 대칭 무게중심 물체를 취급하는 경우보다 크게 나타났다. 또한, 비대칭 무게중심의 물체를 취급할 경우 물체나 상체를 물체의 무게중심 방향으로 기울이는 것은 기울이지 않을 때보다 대측성 등근육에서 Peak EMG 진폭 증가시켰다. 이러한 연구 결과는 비대칭 무게중심의 중량물을 들어 올리는 작업에서 요통 발생을 예방하기 위한 행정적인 조치로써 가능하면 상체를 전두면 기준으로 기울이지 않는 작업자 자세 조언이 필요함을 말해준다.

• Safety and Health at Work
• /
• 제2권3호
• /
• pp.236-242
• /
• 2011

Objectives: To determine the feasibility of predicting static and dynamic peak back-compressive forces based on (1) static back compressive force values at the lift origin and destination and (2) lifting speed. Methods: Ten male subjects performed symmetric mid-sagittal floor-to-shoulder, floor-to-waist, and waist-to-shoulder lifts at three different speeds (slow, medium, and fast), and with two different loads (light and heavy). Two-dimensional kinematics and kinetics were captured. Linear regression analyses were used to develop prediction equations, the amount of predictability, and significance for static and dynamic peak back-compressive forces based on a static origin and destination average (SODA) backcompressive force. Results: Static and dynamic peak back-compressive forces were highly predicted by the SODA, with R2 values ranging from 0.830 to 0.947. Slopes were significantly different between slow and fast lifting speeds (p < 0.05) for the dynamic peak prediction equations. The slope of the regression line for static prediction was significantly greater than one with a significant positive intercept value. Conclusion: SODA under-predict both static and dynamic peak back-compressive force values. Peak values are highly predictable and could be readily determined using back-compressive force assessments at the origin and destination of a lifting task. This could be valuable for enhancing job design and analysis in the workplace and for large-scale studies where a full analysis of each lifting task is not feasible.

• 한국산업보건학회지
• /
• 제22권3호
• /
• pp.257-264
• /
• 2012

Objectives: This study's aims were to evaluate the effects of load center of gravity within an object lifted and feet placements on peak EMG amplitude acting on bilateral low back muscle groups, and to suggest adequate foot strategies with an aim to reducing low back pain incidence while lifting asymmetric load. Methods: The hypotheses that asymmetric load imposes more peak EMG amplitude on low back muscles contralateral to load center of gravity than symmetric load and maximum peak EMG amplitude out of bilateral ones can be relieved by locating one foot close to load center of gravity in front of the other were established based on biomechanics including safety margin model and previous researches. 11 male subjects were required to lift symmetrically a 15.8kg object during 2sec according to each conditions; symmetric load-parallel feet (SP), asymmetric load-parallel feet (AP), asymmetric load-one foot contralateral to load center of gravity in front of the other (AL), and asymmetric load-one foot ipsilateral to load center of gravity in front of the other (AR). Bilateral longissimus, iliocostalis, and multifidus on right and left low back area were selected as target muscles, and asymmetric load had load center of gravity 10cm deviated to the right from the center in the frontal plane. Results: Greater peak EMG amplitude in left muscle group than in right one was observed due to the effect of load center of gravity, and mean peak EMG amplitudes on both sides was not affected by load center of gravity because of EMG balancing effect. However, the difference of peak EMG amplitudes between both sides was significantly affected by it. Maximum peak EMG amplitude out of both sides and the difference of peak EMG amplitude between both sides could be reduced with keeping one foot ipsilateral to load center of gravity in front of the other while lifting asymmetric load. Conclusions: It was likely that asymmetric load lead to the elevated incidence of low back pain in comparison with symmetric load based on maximum peak EMG amplitude occurrence and greater imbalanced peak EMG amplitude between both sides. Changing feet positions according to the location of load center of gravity was suggested as one intervention able to reduce the low back pain incidence.