• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.128-134
• /
• 2005

In order to fabricate the aluminum alloys with good drawability, the textures evolution of the AA5182 sheets after rolling and annealing was studied. The measurement of the deformation textures was carried out for the sheets which were cold rolled with high reduction ratio by using the symmetric roll. In addition, the change of the recrystallization texture was investigated after heat-treatments of the rolled sheets with various heat treatment conditions. Rolling without lubrication and subsequent annealing led to the formation of favorable $rot-C_{ND}\;\{001\}<110>\;and\;{\gamma}-fiber ND//<111>$ textures in AA5182 sheets. From the results, the ${\gamma}$-fiber ND//<111> component well evolved during rolling at highest reduction ratio (over $90\%$, l/d parameter of 6.77). Among shear deformation textures, the ${\gamma}$-fiber ND//<111> was not rotated in holding time of $180\~7,200$ seconds at $350^{\circ}C$. The Monte-Carlo technique was used and could be representatively simulated these textures evolution during recrystallization.

• 대한금속재료학회지
• /
• 제48권7호
• /
• pp.605-614
• /
• 2010

Conventional rolling (symmetric) and differential speed rolling (DSR) were both applied to AA1050 sheets at various velocity ratios, from 1 to 2 between the top and bottom rolls. An electron backscatter diffraction (EBSD) technique was used to measure texture inhomogeneity through the thickness direction. After the annealing process, the annealing texture of the DSR processed sheets was different from that of conventionally rolled sheets. The velocity ratio between the top and bottom rolls affected the texture inhomogeneity and macroscopic plastic strain ratio of the AA1050 sheets. A prediction for the macroscopic plastic strain ratio of AA1050 sheets was carried out using a visco-plastic self-consistent (VPSC) polycrystal model. The strain ratio directionality that was predicted using the VPSC polycrystal model was in good agreement with experimental results.

• Earthquakes and Structures
• /
• 제26권5호
• /
• pp.337-348
• /
• 2024

This paper presents a new seismic isolation design for liquid storage tank (LST). The seismic isolation system includes: LST, flexible membrane, sand mat and rolling seismic isolation devices. Based on the mechanical equilibrium theory, the symmetric concave rolling restoring force model of the isolation device is derived. Based on the elasticity theory and restoring force model of the seismic isolation, a simplified mechanical model of LST with the new seismic isolation is established. The rationality of the seismic isolation design of LST is explored. Meanwhile, the seismic response of the new seismic isolation LST is investigated by numerical simulation. The results show that the new seismic isolation tank can effectively reduce the seismic response, especially the control of base shear and overturning moment, which greatly reduces the risk of seismic damage. The seismic reduction rate of the new seismic isolation storage tanks in Class I, II, and III sites is better than that in Class IV sites. Moreover, the seismic isolation device can effectively control the ground vibration response of storage tanks with different liquid heights. The new seismic isolation LST design provides better isolation for slender LSTs than for broad LSTs.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.861-871
• /
• 1996

In this study, a fuzzy control algorithm was developed for the randomly irregular shape of cold-rolled strip. Currently developed fuzzy control algorithm consists of two parts: the first part calculates the changes of work and intermediate roll bender forces based on the symmetric part of the irregular strip shape, and the second part calculates the weighting factors based on the asymmetric part and modifies the pre-determined roll bender forces according to the weighting factors. As a result of this, bender froces applied at the both sides of the cold-rolled strip were different. In order to simulate the continuous shape control. fuzzy controller developed was linked with emulator which was developed based on neural network. The fuzzy controller and emulator developed simulated the cold rolling process until irregular shape converged to a tolerable range in producing uniform cross-sectional strip shape. The results obtained from the simulation were reasonable for various irregular strip shapes.

• 대한수학회지
• /
• 제49권3호
• /
• pp.585-604
• /
• 2012

In this paper we consider the evolution of the rolling stone with a rotationally symmetric nonconvex compact initial surface ${\Sigma}_0$ under the Gauss curvature flow. Let $X:S^n{\times}[0,\;{\infty}){\rightarrow}\mathbb{R}^{n+1}$ be the embeddings of the sphere in $\mathbb{R}^{n+1}$ such that $\Sigma(t)=X(S^n,t)$ is the surface at time t and ${\Sigma}(0)={\Sigma}_0$. As a consequence the parabolic equation describing the motion of the hypersurface becomes degenerate on the interface separating the nonconvex part from the strictly convex side, since one of the curvature will be zero on the interface. By expressing the strictly convex part of the surface near the interface as a graph of a function $z=f(r,t)$ and the non-convex part of the surface near the interface as a graph of a function $z={\varphi}(r)$, we show that if at time $t=0$, $g=\frac{1}{n}f^{n-1}_{r}$ vanishes linearly at the interface, the $g(r,t)$ will become smooth up to the interface for long time before focusing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.179.6-179
• /
• 2001

This paper proposes the recognition method of the strip shape using the Least-Square method and the distinction method of the asymmetric shape and the compensation method upon the shape control values for the stainless steel cold rolling mill. This paper proposes the shape recognition method before control and the compensation method to minimize the fluctuation of the shape deviation and to get symmetric shape. This paper shows on line test results to verify the performance of the control method for the process. The experiments have been performed with respect to various material type, thickness, and strip width. The performance of the proposed method is obtained excellent quality and high productivity as results.

• KSBB Journal
• /
• 제17권2호
• /
• pp.207-211
• /
• 2002

습식 상 전환법으로 theophylline이 각인된 poly(acryloni-trile-co-acrylic acid) 막을 제조하였다. theophylline은 고분자가 공중합되는 과정에 각인시키거나(in-situ implanting) 제자리 동시 각인) 공중합된 고분자를 DMSO 용액에 녹이면서 template를 섞어 각인시켰다(post implanting, 후 각인). 막의 template molecule에 대한 흡착 선택도는 응고시키는 물의 온도가 높을수록, 혼합물의 초기 농도가 높을수록 크게 나타났다. 후 각인법으로 제조된 막의 흡착선택도가 제자리 동시각인 제작법으로 제조된 막보다 흡착선택도가 우수하였다.

• 한국전문물리치료학회지
• /
• 제4권1호
• /
• pp.63-69
• /
• 1997

Asymmetrical posture during static stance has been identified as a common problem in persons with hemiplegia. This study examined the effect of a purposeful exercise training program on symmetrical weight bearing in three adult persons with hemiplegia. Multiple baseline design was used. The intervention program, including ball throwing and catching, rolling ball catching and throwing, and Swiss ball pulling and stopping was introduced for 15 minutes each day during each intervention phase. Quantitative measurement of the weight distribution was taken with the Limloader. Visual inspection and mean of data revealed a significant improvement in symmetrical weight distribution. This result suggests that a purposeful exercise training program can be effective in helping persons with hemiplegia achieve symmetric stances.

• 한국항해항만학회지
• /
• 제47권6호
• /
• pp.376-385
• /
• 2023

통계에 따르면 어선의 전복 사고는 전체 전복 사고의 절반 이상을 차지한다. 이는 미숙한 조업, 기상 악화, 정비 미흡 등 다양한 원인으로 발생할 수 있다. 업계 규모와 영향도, 기술 복잡성, 지역적 다양성 등으로 인해 어선은 상선에 비해 상대적으로 연구가 부족한 실정이다. 본 연구에서는 이미지 기반 딥러닝 모델을 활용하여 어선의 횡동요 시계열을 예측하고자 한다. 이미지 기반 딥러닝은 시계열의 다양한 패턴을 학습하여 높은 성능을 낼 수 있다. 이를 위해 Xception, ResNet50, CRNN의 3가지의 이미지 기반 딥러닝 모델을 활용하였다. Xception과 ResNet50은 각각 177, 184개의 층으로 구성되어 있으며 이에 반해 CRNN은 22개의 비교적 얇은 층으로 구성되어 있다. 실험 결과 Xception 딥러닝 모델이 가장 낮은 0.04291의 sMAPE와 0.0198의 RMSE를 기록하였다. ResNet50과 CRNN은 각각 0.0217, 0.022의 RMSE를 기록하였다. 이를 통해 상대적으로 층이 더 깊은 모델의 정확도가 높음을 확인할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.180-180
• /
• 2000

The shape of cold strip for the stainless process has been become issue in quality recently, and hence POSCO (Pohang Iron & Steel Co., Ltd) developed an automatic control system for strip shape in the sendzimir mill. The strip shape is measured by an outward measuring roll and is controlled by As_U roll and first intermediate roll. As_U roll consists of 8 saddles, which are controlled vertically. The fist intermediate rolls, which are controlled horizontally, consist of two pairs of rolls up and down. A developed shape control system is applied to real plant by using fuzzy logic and neural network method to control actuators; As_U roll and first intermediate roll. This system composes mainly of three parts as a real-time system, input to output conditioner board, and man-machine interface. The actual shape is recognized by neural network and converted into symmetric shape. The fuzzy controller, based on the shape from neural network and sensor, controls positions of the As_U roll and first intermediate roll. This paper verifies the shape controller performance. The experiments are made on line for the sendzimir mill. The shape control performance shows very efficient for the target tracking, shape symmetry, and fluctuation of shape.