• 제목/요약/키워드: Sword with ring pommel

검색결과 12건 처리시간 0.021초

나주 복암리 정촌고분 출토 소환두도의 재료학적 특성 (A Material Characteristic Study on the Sword with an Undecorated Ring Pommel of the Ancient Tombs of Jeongchon, Bogam-Ri, Naju)

  • 이혜연
    • 헤리티지:역사와 과학
    • /
    • 제52권3호
    • /
    • pp.160-171
    • /
    • 2019
  • 나주 정촌고분 1호 석실 출토 소환두도는 내부 별도 장식이 없는 오각형 환두도이다. 또한 모도와 자도 2자루로 구성된 모자대도이다. 정촌고분 소환두도는 환두부, 병부, 신부, 초미금구로 구성되었다. 소환두도 환두는 철지은장(鐵地銀裝)이지만 은(銀)이 염화은으로 부식되면서 연보라색을 띠며 내부 철제 심의 부식물이 표면에 형성되었다. 염화은은 염화이온이 용해된 매장 환경에서 은이 수분과 반응하여 생성되는데, 가루 형태로 부식되어 유물의 형태 보존을 어렵게 한다. 정촌고분에서 함께 출토된 다른 은제 유물도 유사한 부식 형태를 보여주고 있다. 정촌고분 소환두도의 X선 투과조사 및 CT 분석 결과, 철제 외환에 T자형 슴베를 만들고 신부의 슴베와 연결하였다. 소환두도의 자도를 참고하여 모도의 형태를 유추하면, 모도는 환두, 병두금구, 병연금구를 은판(銀板)으로 감싸고 금제 환과 은제 선으로 병부를 장식하였다. 환두 슴베와 신부 슴베의 연결 방식은 리벳 구멍이 확인되지 않아 단접(鍛接)한 것으로 판단되었다. 초미금구는 철판으로 형태를 만들고 끝단을 견직물로 감싸고 그 아래를 은판과 금제 환으로 장식하였다. 정촌고분 소환두도는 금 은 철제 금속을 다양하게 사용하였으며 백제, 신라, 가야의 여러 가지 요소가 복합적으로 구성되어 주변 유적 및 여러 문화권 영향을 받았음을 확인할 수 있었다.

금관총 출토 명문 환두대도의 목질부 제작기법 연구 (Manufacturing Techniques of Wood Materials Seen in the Inscription Sword with Ring Pommel from Geumgwanchong Tomb)

  • 박수진;권윤미
    • 박물관보존과학
    • /
    • 제17권
    • /
    • pp.43-54
    • /
    • 2016
  • 경주 금관총에서 출토된 '이사지왕(尒斯智王)'명 환두대도(K618)와 '이사지왕도(尒斯智王刀)'명 환두대도(M336)의 목질부에 대하여 조사하였다. 조사 결과 '이사지왕'명 환두대도와 '이사지왕도'명 환두대도의 칼집에 사용된 목재는 모두 가래나무과의 가래나무속(Juglandaceae Juglans spp.)으로 확인되었다. '이사지왕'명 대도의 손잡이와 칼집, '이사지왕도'명 대도의 손잡이는 모두 두 개의 목재를 가공하여 결합하는 방식으로 제작하였다.

강릉시 초당동 고분 출토 금속유물 보존 (Conservation of metal artifacts excavated from tumulus in Chodang-dong, Kangreung City)

  • 유재은
    • 보존과학연구
    • /
    • 통권21호
    • /
    • pp.77-99
    • /
    • 2000
  • Tumuli located in Chodang-dong in Kangreung City are sitesexcavated by the Museum of Kangreung University in 1993.Ofthese sites, a gilt bronze crown and gilt bronze sword with ring pommel with a tri-leaf ornament were excavated from the B-16tumulus. Underneath the gilt bronze crown was the gilt bronzes word with ring pommel with tri-leaf ornament, and these artifacts were treated with Polyurethane foams on the spot followed by special measures for conservation. This manuscript describes measures for conservation andanalysis with regard to the gilt bronze crown, gilt bronze sword with ring pommel with tri-leaf ornament and gilt bronze beltornaments. Bronze on the gilt bronze crown was completely corroded, therefore it was consolidated together with soil in the back of the artifact with Paraloid B72 after cleaning. Polyurethanefoams bottom was finished by applying the mixture of Epoxy resinAW106 and HV935K with soil. On the sword with ring pommel, the wooden part of the hilt was coated with Paraloid B72 (in Xylene) and the blade was consolidated with Paraloid NAD-10 30% after desalting with Sodium sesquicarbonate method. The gilt bronzebelt ornaments were treated with 3% Benzotriazole, coated with Paraloid B72 and then joined by using Cyanlacrylate. Specimens for the gilt bronze crown and gilt bronze belt ornaments were produced and gilding layers were examined under a metallographic microscope. The gilt bronze crown and the gilt bronze belt ornament maintained relatively good gilding quality with uniform gilding layers. Analysis of wood for the sheath of the sword with ring pommel revealed it to be Juglans mandshurica. Further more, analysis of constituents for a blue colored grassbead from dissolution of Polyurethane foams found it to be from the $Na_2O$-CaO-$AI_2O_3$-$SiO_2$ family.

  • PDF

공주 수촌리유적 출토 철제유물의 금속학적 분석 (Metallurgical Investigation of the Iron Objects from Suchon-ri Site in Gongju)

  • 조현경;조남철;이훈
    • 보존과학회지
    • /
    • 제30권3호
    • /
    • pp.317-327
    • /
    • 2014
  • 마한과 백제유적에서 출토되는 철기는 철도, 철모, 철촉이 주를 이루고 있다. 철모의 경우 개인 병기라는 실용기의 특징이 있으며 환두대도의 경우 환두부분의 장식으로 인해 의장용으로써의 비실용기라는 특징이 있다. 공주 수촌리유적은 백제의 중앙과 지방의 묘제가 혼재하고 있는 유적으로 환두대도, 대도, 철모가 함께 출토되었다. 이들을 금속학적으로 분석하여 기능 및 제작기술에 대해 연구하였다. 위세품으로 추정되는 4세기 후반의 환두대도는 당시 최고 기술수준으로 여겨지는 담금질과 고체침탄의 제강기술을 이용하여 제작된 반면 같은 시기의 실용기인 철모에는 이러한 기술이 적용되지 않았다. 그러나 5세기에 이르러 실용기인 철모에도 담금질과 고체침탄기술이 적용된 것을 볼 수 있다. 이는 4세기 대 백제의 중앙은 우수한 철기 제작 기술을 보유하고 있던 것으로 볼 수 있으며, 지방세력도 이러한 기술을 보유하고 있었다 하더라도 다량 제작하여 무기로 활용하는 철모에는 이러한 기술을 적용하지 않은 것으로 판단된다. 따라서 사여품으로 추정되는 환두대도는 백제 중앙의 철기 제작기술체계가 적용되었으며 착장형 병기인 철모는 지방 세력의 기술체계가 적용되었을 가능성이 크다.

서천 봉선리유적 출토 철제대도의 금속학적 조사 및 기능성 고찰 (Metallurgical Investigation and Functional Consideration of the Iron Swords from Bongseon-ri Site in Seocheon)

  • 조현경;정영상;조남철;이훈
    • 보존과학회지
    • /
    • 제30권2호
    • /
    • pp.111-122
    • /
    • 2014
  • 서천 봉선리유적은 백제의 중앙과 지방의 묘제가 혼재하고 있는 유적으로 백제 중앙에서 재지세력에세 사여한 것으로 추정되는 환두도가 다량 출토되었다. 이것은 재지세력이 백제 중앙의 관리 하에 놓이는 과정을 나타내는 부장유물로 추정된다. 이 중 4점의 환두도와 1점의 목병도를 대상으로 금속학적 분석을 실시하여 무기로서의 실용적 기능과 부장용 의장용으로써의 비실용적 기능에 대하여 연구하였다. 목병도 1점은 담금질과 고체침탄의 제강기술을 이용하여 제작되었으며 무기로서의 실용성을 가진다고 볼 수 있다. 반면 4점의 환두도는 인부에는 강도가 작은 미세조직이 나타나고 배부에서 충격을 흡수할 만큼의 미세조직이 나타나지 않으므로 목병도에 비해 무기로서의 기능은 떨어진다고 볼 수 있다. 즉, 서천 봉선리에서 출토된 목병도와 환두도는 실용기와 비실용기로 명확히 구분되는 것이 가장 큰 특징이라고 할 수 있다. 또한 미세조직 내에 존재하는 비금속개재물을 분석한 결과 우스타이트와 유리상이 함께 발견되므로 제련 공정에는 저온환원법이 적용되었을 가능성이 크다.

울산 하대고분 출토 민고리자루칼의 재질 특성과 환두부 제작 방법 (Metallurgical Characteristics and Manufacturing Techniques of Ring-Pommel Swords Excavated from Ancient Tombs in Hadae, Ulsan)

  • 조하늬;김한슬;유하림;이재성
    • 보존과학회지
    • /
    • 제36권3호
    • /
    • pp.197-212
    • /
    • 2020
  • 울산 하대유적에서 출토된 민고리자루칼을 방사선 비파괴조사와 미세조직 분석으로 환두부의 제작 방법과 재질 특성을 살펴보았다. 방사선 비파괴 조사법으로(X-ray, CT) 내부 구조를 확인한 결과, 제작 방법의 기본형식은 철 단일 소재로 칼 끝부터 환두부까지 일체형으로 제작한 단조품임을 확인하였다. 또한 미세조직 분석을 통해 살펴 본 제작기술은 '순철-형태가공, 순철-형태가공-침탄, 강-형태가공-담금질'의 세 가지 유형으로 분류할 수 있었다. 민고리자루칼 5점 중 4점의 환두부는 약 0.7% 내외인 공석강 정도의 탄소 함량을 가진다. 특히 환두부에서는 손잡이보다 증가된 탄소함량을 보이는데, 이는 손잡이 끝 부분을 세장한 형태로 만들고 둥글게 구부리는 과정에서 인성을 부여하기 위한 침탄 처리의 결과로 추정된다. 길이 60 cm 이하의 민고리자루칼 1점은 날 부위에 집중시킨 담금질을 통해 강한 인성을 부여하여 무기로서의 용도를 극대화시켰다. 반면 75 cm를 넘는 4점의 날 부위에서는 담금질 조직인 마르텐사이트가 관찰되지 않았다. 하지만 칼등 대비 날 부위의 탄소함량 증가나 결정립의 미세화는 실용기로서 사용이 가능했음을 보여준다. 2C말에서 4C초로 편년되는 울산 하대고분군 출토 민고리자루칼은 단조기술을 통해 일체형으로 제작하였으며, 사용 목적에 따라 제강, 열처리 기술을 적용하여 칼이 가지는 용도의 효과를 극대화시켜 제작하였다.

경주 덕천리 유적 수습 유물 보존처리-삼두환두대도를 중심으로 (Conservation treatment of the sword with round pommel with a tri-ring excavated at Duckcheon-ri Tomb in Gyeongju)

  • 김지영;서정은;유동완
    • 보존과학연구
    • /
    • 통권26호
    • /
    • pp.127-139
    • /
    • 2005
  • We have conserved the sword with round pommel with a tri-ring which was excavated from No. 1 tomb of the Duckcheon-ri at the Gyeongju and requested from Jungang Research Center of the Cultural Heritage. When this artifact excavated, it was pressed flat state because of the influence of earth pressure and stuck to a gravel and soil laid scattered on the wooden coffin. If the artifacts is handled without plan, it can be damaged, therefore that sword was collected together with soil using the Polyurethane foam. After the artifact which had a weak specific and was collected using a this method can be safetly collected as below; First, we made the supporter of article ordered using a silicon and gypsum. The silicon can conserve the weak point of the artifact because it has a flexible and smooth properties and the gypsum can adhere closely to the artifact because it has a little expansion and shrinking but a hard and fluid characters. Consequently, gypsum is a good complement to the weak point of the silicon. Second, During a remove gauze and a reinforcing agent from the surface of a artifact which was reinforced using a acetone steam method. The acetone steam method can be supplement to a dangerous problem of acetonedircet method because this can be damaged in a surface of the artifact.

  • PDF

대구 달성 55호분 출토 삼엽문이자태도의 재보존처리와 제작 기법 연구 (Re-conservation of the Iron Sword with Ring Pommel with Three-Pointed Leaf Decoration Excavated from Tomb No. 55 at the Dalseong Ancient Tomb Complex in Daegu and a Study of Its Production Method)

  • 이희성;허일권;노지현;박승원
    • 박물관보존과학
    • /
    • 제24권
    • /
    • pp.1-16
    • /
    • 2020
  • 대구 달성 고분군 중 하나인 55호분에서 발견된 부장품 중 삼엽문이자태도의 재보존처리와 제작 기법에 관한 연구이다. 이자태도는 모도가 2점, 자도가 4점이 부착된 이합도이고 출토된 완형으로는 유일하다. 과거 2회의 보존처리가 실시된 기록이 있으며 이번에 균열부 보강제 교체를 위한 재보존처리와 함께 컴퓨터 단층촬영(CT), XRF분석, 실체현미경 관찰을 통해 유물의 재질, 성분, 제작 기법을 조사하였다. 주성분은 구리(Cu)이고 금색 부분에서는 금(Au)과 수은(Hg)이 함께 검출된 것으로 보아 구리에 수은 아말감 금도금을 한 금동으로 추정된다. 제작 기법을 조사한 결과 둥근 삼엽문의 환두부와 병부의 연결은 슴베 부분을 만들어 끼웠고 병판만 금속판으로 제작되어 있는 것을 보아 장식으로서의 기능이 높다고 판단할 수 있다. 상부 자도의 결합 방식은 모도와 같고, 하부 자도는 하나의 금속판을 재단하여 만들었다. 검초는 총 2개의 판을 재단하여 만들었고 상부 자도를 검초에 고정하기 위해 자도 도신부의 아래쪽에 지지대를 넣었으며 하부 자도는 검초 일부를 재단하여 안으로 꽂아 넣었다. 표현된 문양은, 환두부는 삼엽문, 병판은 횡주 연호문, 초구금구와 초미금구는 파상형 점열문, 어미형 초미금구는 점열문을 시문하여 제작되었다.

경산 임당고분 출토 철제 고리자루칼 칠의 유기물 분석 (Organic Material Analysis of a Lacquered Wooden Sheath of Long Sword with Ring Pommel Excavated in Imdang Ancient Tomb)

  • 박종서;조하늬;이재성
    • 보존과학회지
    • /
    • 제34권5호
    • /
    • pp.369-377
    • /
    • 2018
  • 경북 경산에 위치한 원삼국시대 고분인 임당1호분에서 출토된 칠초 철제 고리자루칼의 칠편에 대해 칠의 구성성분과 풍화상태를 확인하기 위해 열분해/GC/MS법으로 유기물을 분석하였다. 직접 열분해/GC/MS법에서 칠편과 원주산 건조옻이 대체적으로 유사한 크로마토그램을 보였다. THM(thermally assisted hydrolysis and methylation)-열분해/GC/MS법의 경우 칠편에서 한국에 자생하는 옻나무 종의 특징적인 성분(1,2-dimethoxy-3-pentadecylbenzene 등)이 관찰되었다. 또한, dimethyl nonanedioate 등 건성유에서 비롯되는 것으로 보이는 성분도 검출되었다. 칠편에서 산화된 catechol 성분이 다량 검출되는 것으로 보아 칠의 열화가 우루시올 성분의 산화와 관련 있을 것으로 추정된다. 이로부터 임당1호분 고리자루칼 칠은 옻과 건성유를 사용하였고 오랜 시간의 경과로 산화가 많이 진행된 상태인 것으로 판단된다.

삼국시대(三國時代) 병기체제(兵器體制)의 연구(硏究) (This Study of the Arms Used in the Three Kingdoms)

  • 김성태
    • 헤리티지:역사와 과학
    • /
    • 제34권
    • /
    • pp.20-58
    • /
    • 2001
  • In order to unravel the characteristics of arms used in the 'Three Kingdoms,' Kokuryo, Silla and Paikje. the classification and the developing procedures of the arms should be first discussed. At first, the basic arms of the soldiers of Three Kingdoms were iron swords, iron spearheads, and bows. During that period, swords attached a ring pommel were commonly used. But after 5A. D. a sword with a decoration pommel appeared. Infantry generally used iron spearheads. From the late 4A. D. the long spearheads were broadly used in cavalry battles. In the late 6A. D. infantry mainly used long spearheads, and this resulted in the foundation of long spearheads units. There were two kinds of bows: Short Bow whose arch is small and Long Bow whose arch is long. It is known that the Short Bow was widely used in Kokuryo and Paikje up to 5A. D. In the early era, infantry used Long Bow, yet it was vastly used after 6A. D. when a castle's strategical value was great and defending a castle was. significant. Above mentioned, as basic combat weapons, iron spearhead and bow were fundamental. In particular, the spearhead was the essential weapon to a soldier. Yet, arrow gun and hook-shape cutters were important weapons. Especially, after 6A.D., when a castle became strategically pivotal in military, the arrow gun became the important weapon. This resulted in the foundation of arrow gun units. Hook-shape cutters were used to snatch horsemen or to climb up to fall the castle. Yet, the cutter was not the Three Kingodoms' basic weapon. In addition, the three stages of arms development in the Three Kingdoms are formation stage, development stage, and settlement stage. The formation stage was the period when premitive military unit appeared in the Three Kingdoms. It ranged from 1B. C. to the mid 3A. D. At that time according to regions. there were two weapon systems operating: North area including Kokuryo and the northern part of Paikje and South area including Silla, Kaya and the southern part of Paikje. ln North area a sword with a ring attached at the end of the holder, iron spear with neck and mid-size flat holder and iron arrowhead with an extension to fix, were used. In this period, during a war calvary units were mostly used and their weapon systems seemed possibly to succeed in that of Kochosun. In the development stage, when LoLang's influence on surroundings became weak, Koguryo, Paikjae and Silla had directly contacted each other. In the late 3A.D. to the early 6A.D., Silla achieved a drastic improvement in weapon system. This was the period when Kokuryo played a leading role in arms race. Kokuryo's arms manufacturing techniques passed onto Silla, Kaya and Paikje. In combat strategy a joint operation between infantry and calvary prevailed even if their military tactics were different. In a calvary battle heavily armed horsemen played import roles at this period. The horsemen and even horses were heavily guarded with iron armors. After all, the appearance of fully armed horsemen implies the very need of powerful destructive forces in weapon system. At that time, basic weapons were a big sword with a ring attached at the end of the holder, swallow's tail-shape spear with neck, and iron spearhead with neck and an extension. The settlement stage began at the mid 6A.D., when it was the revolutionary period in the arms development history. Of course, actual proofs and picture documents were not sufficient enough to penetrate full scale of the weapon system. But, according to historical circumstances and historic records, it is very certain that this period was the peak in arms development. In this period special military units, such as infantry-calvary companies, Archery units and Long spear units, that executed particular duties with special weapons, were founded. This became the characteristics of the settlement stage.