• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.936-939
• /
• 2004

In this paper a comparison of the initial rotor position estimation methods by two type search coils for switched reluctance motor(SRM) is presented. The experimental results of the two methods show that the interior central pole search coil method has better performance than the exterior pole search coil method. The reason of the discrepancy in performance is described.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.4
• /
• pp.32-37
• /
• 1999

본 논문에서는 위치센서 없는 Switched reluctance motor에 대해 저가로 구현가능한 새로운 속도제어 알고리즘을 제안한다. 대부분의 기존의 연구결과들은 상전환을 위한 점호각을 정확히 검출하는 것을 목표로 하였다. 그러나, 점호각 검출에서의 오차는 고속운전시 발생토크맥동과 효율의 저하, 심지어 탈조를 야기해왔다. 속도제어를 위해 제안하는 방법은 잘 알려진 phase locked servo(PLS) 속도제어루프에 ΔΣPLL과 유사한 점호각추정기를 위상검출기로 사용하는 것이다. 그것에 의하여, 제안한 알고리즘은 점호각검출오차와 발생토크맥동을 줄일 수 있다. 따라서, 저가로 고속운전에서의 속도오차를 감소시킬 수 있다.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.175-178
• /
• 2000

We propose a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-centre] in various fields. First of all, in this method, initial values are determined by the Switched Reluctance Motor of system and Ziegler-Nichols method. After deciding binary strings of parents generation using by the fitness values of genetic algorithms, we perform selection, crossover and mutation to generate the descendant generation. The advantage of this method is better than the neural network and multiple regression model method in characteristic of output, and has extent of applying without limit of initial parameters.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.403-406
• /
• 2002

The paper presents the componet parts and their models for the switched reluctance motor drive system with the angle position-current chopping control and with the fixed angle pulse width modulation control. The calculation of the parameters and the simulated models based on the MATHLAB SIMULINK software package are introduced by a four-phase 8/6 structure prototype with the four-phase asymmetric bridge ower converter. The simulation of the prototype in the course of starting is made by the simulated models at the different control strategies and speeds.

• Journal of Power Electronics
• /
• v.3 no.3
• /
• pp.167-174
• /
• 2003

In a switched reluctance motor drive, it is important to synchronize the stator phase excitation with the rotor position, because the position of rotor is an essential information. Although high resolution optical encoders or resolvers are used to provide a precise position information, these sensors are expensive. Moreover, in the high-speed region, switching angles are fluctuated back and forth out of the preset value, which is caused by the sampling period of the microprocessor. In this paper, a low cost analog encoder suitable for practical applications is proposed. And the control algorithm to generate switching signals using a Simple digital logic is presented. The validity of the proposed analog encoder with a proper logic controller is verified from the experiments.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.170-172
• /
• 1999

This paper deals with modal analysis and displacement of stator in SRM due to electromagnetic forces according to the rotor position. The analysis is performed by using 3 dimensional Finite Element Method(FEM). And, the prediction of resonance speed is achieved from the comparison with current harmonic according to duty ratio of voltage source and the natural frequencies.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1146-1150
• /
• 2000

We propose a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control in various fields. First of all, in this method, initial values are determined by the Switched Reluctance Motor of system and Ziegler-Nichols method. After deciding binary strings of parents generation using by the fitness values of genetic algorithms, we perform selection, crossover and mutation to generate the descendant generation. The advantage of this method is better than the neural network and multiple regression model method in characteristic of output, and has extent of applying without limit of initial parameters.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.325-327
• /
• 1998

Disk type single-phase switched reluctance motor which has an advantage of simple robust construction, simple control circuity, and low manufacturing cost has a specific property of axial flux machine and radial flux machine simultaneously. So, this DSPSRM has a complicated magnetic circuit and it is difficult to analyze characteristics of DSPSRM for design. In this paper, we used to analyze the effects of radial flux and axial flux simultaneously by 3D-finite element method. From the results of 3-D FEM, we obtained the approximated torque characteristics of DSPSRM. It's analysis results can be used in optimal design of DSPSRM considering the saturation.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2021-2023
• /
• 2001

Switched Reluctance Motor(SRM) Drive 회로의 경제성과 효율성을 감안하여 본 논문에서는 범용적으로 많이 쓰이는 비대칭 컨버터와 변형된 C-dump 컨버터를 비교 분석하였으며 산업용 저전압 SRM에 각각 적용하였을 때의 특성들을 기술하였다. 고속도 영역과 저속도 영역에서의 Advance angle과 Firing angle 제어를 하였을 때의 토크특성과 전류특성을 비교하였다. 또한, PWM 을 이용하여 토크리플을 감안한 적절한 on-off 각을 제시하여 그에 따른 저속도 영역에서의 특성들을 기술하였다.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.55-60
• /
• 2007

This paper proposes a hydraulic pump system that uses a variable speed SR drive and constant capacity pump. For the design of the SRM (Switched Reluctance Motor) and digital controller, base speed and rating torque are determined from the mechanical specifications of the hydraulic pump. In order to minimize the power consumption during the maintaining of preset oil-pressure, the pressure control system changes the maximum oil-pressure band and flow rate according to the motor speed. The DSP control system adjusts the oil-pressure and the speed of the SRM from the pressure sensor signal, due to conservation of power consumption by the hydraulic pump. A 2.2Kw, 12/8 pole SR motor and DSP based digital controller are designed and tested with experimental set-up. The test results indicate that the system has some good features such as high efficiency and rapid response characteristics.