• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.123-126
• /
• 2005

STP gets to have different network performance, depending on the configuration method of topology. Accordingly, for efficient network environment, it is necessary to make the optimum topology. This paper proposed a way to make the optimum topology for construction of efficient network among switches on ethernet: the optimum topology was made by calculating the time the switches in the same domain receive the frame transmitted from the root switch, using a mathematical model. And it analyzed the performance of the topology depending on the location of the root switch. As a result of analyzing the performance, this study came to the conclusion that it would be effective to locate the root switch in the center of the square network.

• ETRI Journal
• /
• v.43 no.5
• /
• pp.799-811
• /
• 2021

This paper considers a challenging problem: to simultaneously optimize the cost and the quality of service in opaque wavelength division multiplexing (WDM) networks. An optimization problem is proposed that takes the information including network topology, traffic between end nodes, and the target level of congestion at each link/ node in WDM networks. The outputs of this problem include routing, link channel capacities, and the optimum number of switch ports locally added/dropped at all switch nodes. The total network cost is reduced to maintain a minimum congestion level on all links, which provides an efficient trade-off solution for the network design problem. The optimal information is utilized for dynamic traffic in WDM networks, which is shown to achieve the desired performance with the guaranteed quality of service in different networks. It was found that for an average link blocking probability equal to 0.015, the proposed model achieves a net channel gain in terms of wavelength channels (𝛾_w) equal to 35.72 %, 39.09 %, and 36.93 % compared to shortest path first routing and 𝛾_w equal to 29.41 %, 37.35 %, and 27.47 % compared to alternate routing in three different networks.

• The Journal of Information Systems
• /
• v.30 no.4
• /
• pp.43-69
• /
• 2021

Purpose Although companies occupied the network market take the advantageous position first and can be successful in securing users over a certain size, it is important to satisfy the customers' demand and prevent the outflow of users toward a new alternative SNS. What is more, there are frequent changes in the flow of users toward new SNSs. Despite these dynamic market circumstances, there is a lack of research to explain the switching behaviors of SNS users. Design/methodology/approach The objective of this study is to explain and verify a specified migration theory(Push-Pull-Mooring model) focused on SNS fatigue in the psychological point of view, as well as reviewing previous studies on functional and technical characteristics of SNSs themselves. Moreover, this study tried to highlight factors affecting users actual SNS switch rather than their switching intention. Findings According to the statistical analysis, the most influenced pull factor to switch SNS was the alternative attractiveness. On the other hand, undesired relationship burden, service innovation and important mooring factors to prevent users' SNS switch. This study has a significant contribution to the theory, which analyzed users' actual SNS switch, and examined SNS users' psychological factors(SNS fatigue), reviewing the characteristics of existing services. To secure more users and to keep them, companies providing social network service need to develop differentiated strategies by analyzing psychological characteristics of various users.

• The KIPS Transactions:PartC
• /
• v.11C no.2
• /
• pp.253-262
• /
• 2004

In this paper, a session allocation algorithm for a switch with multiple shared links is proposed. The algorithm guarantees the reserved bandwidth to each service class and keeps the delay of sessions belonging to a service class as close as possible even if the sessionsare allocated to different shared links. To support these qualities of services, a new scheduling model for multiple shared links is defined and a session allocation algorithm to decide a shared link to be allocated to a new session on the connection establishmentis developed based on the model. The proposed heuristic algorithm allocates a session to a link including the subclass with the shortest (expected) delay that subclasses of the service class the session belongs to will experience. Simulation results verify that a switch with multiple shared links hiring the proposed algorithm provides service classes with fairer bandwidth allocation and higher throughput, and guarantees reserved bandwidth better than the switch hiring other session algorithms. It also guarantees very similarservice delay to the sessions in the same service class.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.6
• /
• pp.1581-1589
• /
• 1999

In B-ISDN(Broadband Integrated Services Digital Networks), the efficient implementation of multicast function is very important since the demand for distributed type of service such as VOD(Video On Demand) system is expected to grow. In this paper, the multicast performance characteristics of fully-interconnected switch fabric used for our research is the proper architecture for a small-sized switch element, and it uses bit addressing method for addressing scheme and thus it is easy to implement multicast function without adding a function block. To incorporate the bursty nature of traffic in ATM networks, we used IBP(Interrupted Bernoulli Process) model as an input traffic model. We presented and analyzed the simulation results in terms of the multicast operation of the switch. Based. on this study, it its analyzed that congestion avoidance may be feasible if we use a proper traffic control scheme by finding an overload point due to multicast.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.528-531
• /
• 1994

In this paper, the resonant switch model applicable to the DC and small signal analysis of the resonant converter is studied because the conventional PWM switch model can't be applied to the analysis of the resonant converter. The charge control is superior to the peak current control in QRC because QRC is operated in FM mode. So the charge control technique is adopted and used to compose the ZVS-QRC boost with feedback loop.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.341-348
• /
• 2003

Photovoltaic systems normally use a maximum power point tracking (MPPT) technique ta continuously deliver the highest possible power to the load when variations in the insolation and temperature occur. A simple method of tracking the maximum power points (MPPs) and forcing the boost converter system to operate close to these points is presented through deriving small-signal model and transfer function of boost converter. This paper aims at modeling boost converter including equivalent series resistance of input reservoir capacitor by state-space-averaging method and PWM switch model with properly designed controller for maximum photovoltaic power tracking control.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1530-1535
• /
• 2003

The automatic load transfer switch (ALTS) typically automatically transfers electrical loads from a normal electrical power source to an emergency electrical power source upon reduction or loss of normal power source voltage. It can also automatically re-transfer the load to the normal power source when the normal voltage has been restored within acceptable limits. The transfer operation of ALTS is accomplished by a spring-driven linkage mechanism. In this paper we build a dynamic model of driving mechanism for ALTS using ADAMS and checked the characteristics of the transfer operation. Finally we performed a detailed design of the driving mechanism through results of analysis and confirmed it to satisfy design requirements.

• Laser Solutions
• /
• v.3 no.3
• /
• pp.21-29
• /
• 2000

For the direct metal shape processing the powder feed device which is different from the widely used in rapid prototyping. is developed, The three dimensional object is shaped with the melting metal powder. The developed research has applied to rapid prototyping in ultraprecision for MEMS and medical science fields required of rapid manufacture of complex shape. The goal of this study make 3D model which has precision accuracy. Powder spreading apparatus has been more improved because that the control of powder spread is very important in layer manufacturing. It consists of the vibration motor, nozzle and tube which supplies various metal powder. This apparatus could control the spreading velocity that could control powder spreading thickness. Laser on/off switch was adapted because laser scanning velocity must be preserved constantly to prevent heat transformation of laser overheating. The error between sintered thickness md experimental one occurred by shrinkage in sintering melting process. The problem of heat transformation was solved by On/Off switching system.

• Journal of Communications and Networks
• /
• v.15 no.3
• /
• pp.321-328
• /
• 2013

In this paper, we present a technique for obtaining conflict-free schedules for real-time automation protocol for industrial Ethernet (RAPIEnet) switches. Mathematical model of the switch is obtained using graph theory. Initially network traffic entry and exit parts in a single RAPIEnet switch are identified, so that a bipartite conflict graph can be constructed. The obtained conflict graph is transformed to three kinds of matrices to be used as inputs for our simulation model, and selection of any of the matrix forms is application-specific. A greedy edge-coloring algorithm is used to schedule the network traffic and to solve the minimum coloring problem. After scheduling, empty slots are identified for forwarding the non real-time traffic of asynchronous devices. Finally, an algorithm for synchronizing the schedules of adjacent switches is proposed using edge-contraction and minors. All simulations were carried out using Matlab.