• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.720-722
• /
• 2009

This work is mainly focused at developing the hydrogen production unit with the capacity of 20 $Nm^3/h$ of high purity hydrogen. At present steam reforming of natural gas is the preferable method to produce hydrogen at the point of production cost. The developed hydrogen production unit composed of natural gas reformer and pressure swing adsorption system. To improve the thermal efficiency of steam reforming reactor, the internal heat recuperating structure was adopted. The heat contained in reformed gas which comes out of the catalytic beds recovered by reaction feed stream. These features of design reduce the fuel consumption into burner and the heat duty of external heat exchangers, such as feed pre-heater and steam generator. The production rate of natural gas reformer was 41.7 $Nm^3/h$ as a dryreformate basis. The composition of PSA feed gas was $H_2$ 78.26%, $CO_2$ 18.49%, CO 1.43% and $CH_4$ 1.85%. The integrated production unit can produce 21.1 $Nm^3/h$ of high-purity hydrogen (99.997%). The hydrogen production efficiency of the developed unit was more than 58% as an LHV basis.

• Journal of Environmental Science International
• /
• v.29 no.2
• /
• pp.155-166
• /
• 2020

This study was conducted to analyze the current situation of the logging operation system and to suggest an effective policy plan to secure important raw materials for the use of forest biomass. The dissemination of forestry mechanization and the establishment of the logging operation are important tasks to establish a system and reduce costs of timber production by increasing the use of forest biomass; this includes increasing the supply of timber for domestic products and increasing the production of wood chips and wood pellets. In particular, the efficiency of steep-slopes catenary system machinery for yarding such as tower-yarder and swing-yarder should be urgently supplied to cope with forest production and supply of forest biomass energy resources. In addition, it is necessary to continuously promote the dissemination of high-performance forestry machinery as is being done in Japan. At the same time, instead of distributing or retaining the spread of forestry machinery to the state and local governments, it is necessary to distribute timber production work centered on forest cooperatives or private timber producers to be carried out by wood producers, forest cooperatives and individuals.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1443-1445
• /
• 1996

Hydrogen passivation enhances the electrical characteristics of poly-Si TFT(Thin Film Transistor). However, the weak Si-H bonds, generated during hydrogenation, degrade the stability of the device. So, we carried out the passivation treatment with $NH_3$ or $N_2$. We compared the effect of $NH_3$ or $N_2$ passivation treatments with that of hydrogenation in terms of stability. Through the $NH_3$ passivation treatment, we obtained the most improved subthreshold swing of 1.2V/decade from the initial subthreshold swing of 1.56V/decade. When electrical stress was given, the $NH_3$ passivated devices showed best electrical stability.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.152-167
• /
• 2001

Recently safety systems for the commercial vehicle have been rapidly developed. However, we still have many problems in the vehicle stability and the braking performance. Especially, a commercial vehicle may meet a dangerous braking condition when the vehicle is lightly loaded or empty and when the road is wet or slippery. Under these conditions, the truck can spin out or the tractor can jackknife or the trailer can swing out. To design the air brake system for the commercial vehicle, since the air brake system has many design variables, there must have been intensive researches on a method how to prevent dynamic instability and how to maximize the vehicle deceleration. In this study, mathematical models about the tractor-semitrailer and the air brake system including an ABS controller have been constructed for computer simulation. Also, simple examples are applied to show the usefulness of the program. Designers can use this simulation program for understanding the braking characteristics such as trajectory, braking distance, longitudinal deceleration, lateral deceleration, and yaw rate on various road conditions.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.844-847
• /
• 1997

Countermeasure for instability due to sudden changes like electric short circuit, line switching, generation/load dropping etc. in power systems have been sought in terms of intentional or controlled network changes such as series/shunt compensation and generation/load rejection etc. This paper presents the comparison of stability improving effects by series and shunt compensation for the first swing step out phenomena of a large capacity generating station.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.57-65
• /
• 2011

This research was conducted to biomechanically analyze Tippelt motion in parallel bars, and establish technical understanding. To achieve that goal, the performances of the Tippelt acts carried out by five world top-class national gymnasts in the parallel bars 3-dimensional cinematographic analysis and EMG analysis were conducted and following conclusion were obtained. The Tippelt motions of excellent national gymnasts perform tap motion through the down swing of a large circular movements, and perform kick-out motion rapidly extending shoulder joint angle and hip joint angle with the trunk in a position close to perpendicular position at the vertical downwardness of the grasping the bars. At this time, if handstand starting the movement is too delayed or rapidly down swung, it was shown that from the initial falling, unnecessary muscular power was wasted in trapezius, anterior deltoid, erector spinae, latissimus dorsi, upper rectus abdominis, lower rectus abdominis. The muscular parts in tap motion generating muscle action potential were pectoralis major, rectus femoris, upper rectus abdominis, lower rectus abdominis, and those in kick-out motion were upper rectus abdominis, lower rectus abdominis, trapezius and anterior deltoid.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.5
• /
• pp.217-225
• /
• 2005

In a power system, an out-of-step condition causes a variety of risk such as serious damage to system elements, tripping of loads and generators, mal-operation of relays, etc. Therefore, it is very important to detect the out-of-step condition and take a proper measure. Several out-of-step detection methods have been employed in relays until now. Most common method used for an out-of-step detection is based on the transition time through the blocking impedance area in R-X diagram. Also, the R-R dot out-of-step relay, the out-of-step prediction method and the adaptive out-of-step relay using the equal area criterion (EAC) and Global Positioning Satellite (GPS) technology have been developed. This paper presents the out-of-step detection algorithm using the time variation of the complex power. The complex power is calculated and the mechanical power of the generator is estimated by using the electrical power, and then the out-of-step detection algorithm which is based on the complex power and the estimated mechanical power, is presented. This algorithm may detect the instant when the generator angle passes the Unstable Equilibrium Point (UEP). The proposed out-of-step algorithm is verified and tested by using Alternative Transient Program/Electromagnetic Transient Program (ATP/EMTP) MODELS.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.37-47
• /
• 2004

This study was designed to understand gait pattern on the MBTI personality types by analyzing and figuring out specific charges, which includes analyzing gait parameter which was shown in walking movement. The personality types was measured by the standard MBTI(Myers- Briggs Type Indicator) test and gait analysis make used of GAITRite program. The objects of research were convenience sampled student of M College. Temporal and spatial parameters were calculated based on the MBTI personality types test using measured data, 68 items and SPSS pc/program was conducted to find out specific changes and obtainted the results as follows. There was not found significant in rate of swing phase and stance phase, step length, stride length, base of support, toe in/out between Extraversion group and Introversion group. But Extraversion group was significantly higher than Introversion group in velocity and cadence(p<.05). Sensing group was significantly more than iNtuiton group in cadence. There was not found significant in all parameter between Thinking group and Feeling group, Judging group and Perceiving group.

• Journal of Korea Water Resources Association
• /
• v.50 no.6
• /
• pp.419-427
• /
• 2017

In mountainous rivers, the drag force acting on cobbles abundant in the riverbed surface is important in predicting behavior and response of the river. However there is little research for the drag coefficients of cobbles. This paper is to carry out the experiments for drag force of cobble and analyze the relation between the cobble shape and the drag coefficient. The effects of the shape factor on the drag coefficients $C_D$ when the long axis or the short axis of the cobbles are parallel to the direction of flow velocity were analyzed. The coefficient of drag force increased with the nominal diameter Reynolds number $R_{ep}$. The drag coefficients are greater in short axis than long axis. The coefficient of determination of the relation between $C_D$ and $R_{ep}$ is greater in long axis than short axis. This means that the drag forces acting on the irregularly-shaped cobbles depend on the axis. A change of the drag force distribution has brought about the alternative swing of cobbles. For $R_{ep}$ > 12,000, the amplitude of the swing has been increased sharply and especially was greater in short axis than long axis.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.1
• /
• pp.49-55
• /
• 2008

The feasibility of ionic liquid as a novel absorbent of $SO_2$ for the separation of $SO_2$ from $SO_2/O_2$ mixture in the thermochemical IS(Iodine-Sulfur) cycle was investigated. 1,3-dimethylimidazolium methylsulfate ([DMIm]$MeSO_4$) had shown twenty five times higher solubility of $SO_2$ than that of $O_2$. The dependence of $SO_2$ solubility by [DMIm]$MeSO_4$ on temperature and $SO_2$ partial pressure was examined, which confirmed the possibility of temperature and pressure swing for the separation process. Through cyclic absorption and desorption with temperature swing the stability of [DMIm]$MeSO_4$ in the separation process was also demonstrated. As a result of the experiments carried out, $SO_2$ separation from $SO_2/O_2$ mixture with ionic liquid([DMIm]$MeSO_4$) can be applied to the thermochemical IS cycle.