• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.78-85
• /
• 2015

In Thailand, the electricity consumption is very high with the intention of reduce high temperature in the building. Since 2000, a lot of people paying attention to Green-Building concept. A similar concept is natural building, which is usually on a smaller scale and tends to focus on the use of natural materials that are available locally. Therefore, the Earth-Block (EAB) product is appropriated approach to reduce energy consumption in the buildings. The EAB is produced with environmentally friendly process, which does not release harmful pollution and effective cost. The main significant character is durable materials for building construction. This study aims to develop the new thermal insulation by using soil-cement with vetiver grass fibre. Additionally, it describes the innovative systems used in production of EAB materials by mixing the soil-cement with vetiver grass fibre. This paper reveals lowest costs, space configurations changing and greater design flexibility for constructing the building.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.144-148
• /
• 2015

The paper presents the estimation of power losses in distribution transformer of Provincial Electricity Authority (PEA) distribution system at Muang district of Suphanburi province in Thailand. Data of 416 power distribution transformers composed of transformer (kVA), load current, no load loss and full load loss which were used for calculating energy losses. It was found that the total energy loss of all transformers is approximately 1,756,380 kWh/year.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.113-119
• /
• 2015

This paper presents a design and implementation of real time electrical energy computing tool to measure and record the electrical energy based on type of detection devices, Hall Effect current sensor and Microcontroller. The tool was installed on the system power supply of the room and compared with kWh meter. Finally, we found that the energy record has error of average power calculating results is 0.077%.

• Acta Via Serica
• /
• v.9 no.1
• /
• pp.33-66
• /
• 2024

There is a lot of evidence of early port cities and small habitation sites along the Thai-Malay Peninsula's coastlines. These sites appeared on the trans-peninsular routes during the Maritime Silk Roads period, from 2,000 to 1,500 BP. The Thai-Malay Peninsula was mentioned in many documents as Suvarnabhumi (India), Aurea Chersonese (Greek), and Jin Lin (Chinese), meaning the Golden Land. Ptolemy's map displays that there were many port cities along this peninsula. It corresponds to the Milinda-panha, which depicts many port cities in Suvarnabhumi. Foreign documents primarily documented the presence of major port cities, while inland habitation sites received less recognition. This paper aims to reconstruct the trans-peninsular routes in order to understand their networks, connections, and roles. The second aim is to understand the hierarchy of each site. This paper will focus on two important settlements and high-value artifacts along three routes: the Kra Isthmus Route, the Pho Khao Thong and Tha Chana Route, and the Krabi to Surat Thani Route. I conducted an archaeological survey of these three routes and others during 2021-2023 under the Suvarnabhumi Studies Center, TASSHA Institute, and the Ministry of Higher Education, Science, Research, and Innovation.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.138-143
• /
• 2015

This paper was aimed to study the drying kinetics of coffee and to investigate the thin-layer drying kinetics of coffee by using a convective air dryer. The coffee was dried for the temperatures of 40, 50 and $60^{\circ}C$ with relative humidity in the range of 14-25% the airflow rate fixed at 1 m/s. According to the experiment result, the drying rate curve showed that drying process took place only in the falling rate period. Seven thin layer drying models (Newton, Page, Henderson and Pabis, Logarithmic, Wang and Singh, Two terms, Modified Henderson and Pabis) were fitted to the experimental moisture content data. The Two-trem model was found to be a better model for describing the characteristics of coffee for the temperatures of 40, 50 and $60^{\circ}C$. The effective moisture diffusivity of coffee increased when the drying temperature increased. The value was in the range of $4.5028{\times}10^{-11}$ to $6.4803{\times}10^{-11}m^2/s$.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.124-131
• /
• 2015

Computational fluid dynamics (CFD) has been employed for the Heat exchanger efficiency of a counter flow heat exchanger. The Heat exchanger efficiency has been assessed by considering the computed Nusselt number and flow friction characteristics in the double pipes heat exchanger equipped with two types twisted-tapes: (1) single clockwise direction and (2) alternate clockwise and counterclockwise direction. Cold and hot water are used as working fluids in shell and tube side, respectively. Hot and cold water inlet mass flow rates ranging are between 0.04 and 0.25 kg/s, and 0.166 kg/s, respectively. The inlet hot and cold water temperatures are 54 and $30^{\circ}C$, respectively. The results obtained from the tube with twisted-tapes insert are compared with plain tube. Nusselt number and friction factor obtained by CFD simulations were compared with correlations available in the literature. The numerical results were found in good agreement with the results reported in literature.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.68-77
• /
• 2015

This study was the use of the finite element method in the deep drawing process of a rectangular shell cup. The aim was to analyse the equivalent strain in the workpiece and to find out what happened to the disc blank sheet before the forming by stamping. The rectangular shell cup was $24{\times}30{\times}20$ mm. and made of 2mm.thick SUS 403 and SUS 304 stainless steel. There were 3 types of blank sheets: 1) square sheet 2) 45 degree angled edge cutting sheet 3) circular sheet. It was found out that the drawing up with the use of 3 types of blank sheet made of SUS 304 stainless steel had no risk in the workpiece. For the stamping of the rectangular shell that used a square sheet made of SUS 403 stainless steel, it was found out that there was no risk in the work piece, but with the use of 45 degree angled edge cutting sheet or round sheet, the work piece had a risk to be damaged.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.64-70
• /
• 2015

This paper proposes fluorescent electronic ballast with high power factor and low line input current harmonics. The system performance can be improved by a charged pump circuit. Details of design and circuit operation are described. The proposed electronic ballast is modified from single-stage half bridge class D electronic ballast by adding capacitor parallel with each power switch and setting the circuit parameter to operate under class DE inverter condition. By using this proposed method the DC bus voltage can be reduced around by 50% compare with conventional class D inverter circuit. Because the power switches are operated at zero voltage switching condition and low dv/dt of class DE switching. The experimental results show that the proper frequency of the prototype is around 50 kHz with input power factor of 0.982, $THD_i$ 10.2% at full load and efficiency of more than 90%.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.101-112
• /
• 2015

Renewable energy resources play an important part in the world's future. Renewable energy sources have the following components: biomass, geothermal, solar thermal, directs solar, wind, tidal and hydropower. Hydropower is still the most efficient way to generate electricity worldwide. Hydropower projects can contribute as a cheap energy source, as well to encourage the development of small industries across a wide range of new technology; furthermore hydropower systems use the energy in flowing and falling water to produce electricity or mechanical energy. Hydropower systems are classified as large, medium, small, mini and micro according to their installed power generation capacity, as do the following components: water turbines, control mechanisms and electrical transmissions. In this article a review of small hydropower systems has been done on the principles surrounding the fundamentals of hydraulic engineering, the fundamentals of hydrology, identification of sites and economic analysis.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.67-76
• /
• 2015

This paper aims to study and design of Organic Rankine Cycle (ORC) Machine using Isopentane as working fluid expanding through Tesla turbine. The study on ORC machine expanding through Tesla turbine has result on the efficiency of Tesla turbine. In addition, Thermodynamics theory on isentropic efficiency proved to be a successful method for overcoming the difficulties associated with the determination of very low torque at very high angular speed. By using an inexpensive experiment device and a simple method, the angular acceleration method, for measuring output torque and power in a Tesla turbine is able to predict a tendency of output work. The experiments using two Tesla turbine sizes, the first size is 1.6 bigger than the second one. In comparison with the first size, the tesla turbine can produce power output more than 62% of the second size. Further study on the machine can be developed throughout the county due to its low cost and efficiency.