• Clinics in Shoulder and Elbow
• /
• 제21권4호
• /
• pp.246-251
• /
• 2018

Compared to single row repair, use of lateral row anchors in suture bridge rotator cuff repair enhances repair strength and increases footprint contact area. If a lateral knotless anchor (push-in design) is inserted into osteoporotic bone, pull-out of the lateral row anchor can developed. However, failures of lateral row anchors have been reported at several months after surgery. In our cases, even though complete cuff healing occurred, delayed pull-out of the lateral row anchor in the suture bridge repair occurred. In comparison to a conventional medial anchor, further biomechanical evaluation of the pull-out force, design, and insertion angle of the lateral anchor is needed in future studies. We report three cases with delayed pull-out of lateral row anchor in suture bridge rotator cuff repair with a literature review.

• Clinics in Shoulder and Elbow
• /
• 제11권2호
• /
• pp.82-89
• /
• 2008

이상적인 회전근 개 봉합술은 봉합 초기 높은 고정 강도로 봉합 부위 건-골간 간격 형성을 최소화시키며, 재활 과정 중 발생하는 반복적인 부하에도 견디는 기계적 강도를 나타내어 궁극적으로 건-골 조직의 생물학적 치유를 얻을 수 있는 방법이다. 현재 사용되는 회전근 개 봉합술 중 교량형 봉합술식은 회전근 개 부착 부위를 해부학적으로 복원할 수 있으며, 건-골간 압력 접촉 면적을 증가시키고, 방사형의 봉합 형태를 통하여 회전근 개 전체에 균등하게 압력을 분포함으로 부하를 분산시키며 생물학적 치유를 향상시킨다. 또한 건-골간 간격 형성을 최소화하며 전단 및 회전 응력에 저항력을 주어 정상과 동일한 해부학적 복원력으로 빠른 재활 운동을 가능하게 한다. 그러나 비록 교량형 봉합술식이 다른 술식에 비해 우수한 생역학적 특성을 나타내도 임상적으로 더 좋은 결과를 초래한다는 증거는 없으며, 이열 봉합술과는 비슷한 재파열율이 보고되고 있다. 회전근 개봉합술의 선택은 회전근 개 파열 크기, 파열 양상 및 건의 상태 등을 고려하여 적절하게 선택하여야 할 것으로 사료된다.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.159-159
• /
• 2009

Repeated pulling-out of a suture anchor in the lateral row despite repeated attempts at insertion during a rotator cuff repair is not uncommon with the suture-bridge technique, especially in patients with osteoporosis. We describe a simple procedure for dealing with the pull-out of a PushLock anchor in the lateral row using a suture anchor with a suture eyelet during rotator cuff repair applying the suture-bridge technique.

• Clinics in Shoulder and Elbow
• /
• 제19권4호
• /
• pp.237-240
• /
• 2016

Retear patterns after arthroscopic rotator cuff repair are classified into two patterns according to retear location. Type 1 is when the retear pattern occurs directly on the tendon at the bone repair site using the suture anchor repair method. Type 2 is when the retear pattern occurs at the musculocutaneous junction with a healed footprint in patients who undergo the suture bridge method. Here, the authors report another retear pattern, which was identified as a type 2 retear on magnetic resonance imaging in patients who had undergone arthroscopic rotator cuff repair by the suture-bridge technique. This pattern was different from the type 2 retear and occurred at the portion of the cuff away from the healed rotator cuff under the view of the arthroscope.

• Clinics in Shoulder and Elbow
• /
• 제17권3호
• /
• pp.134-137
• /
• 2014

To report the fracture of proximal humerus in the lateral anchor site after suture bridge repair. A 57-year-old female patient with shoulder pain on the right-side was admitted through the emergency room following a car accident. Seven weeks before the accident, the patient had undergone surgery at a different hospital for the repair of supraspinatus tendon rupture on the right-side via suture bridge technique. Humerus surgical neck fracture was confirmed by X-ray, and proximal humerus fracture at the anchor site was confirmed by magnetic resonance imaging. Following 7 months of conservative treatment resulted in satisfactory bone union and motion of the shoulder joint. We report the need of close observation during and after the arthroscopic repair of the rotator cuff in patients with osteoporosis.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.162-162
• /
• 2009

After preparation of the bone bed, two doubly loaded suture anchors with suture eyelets are inserted at the articular margin of the greater tuberosity. A retrograde suture-passing instrument penetrates the rotator cuff to retrieve the sutures through the modiWed Neviaser or subclavian portal. An ipsilateral pair of suture eyelets in the suture anchor is passed through the margins of the rotator cuff tear. The blue suture of the second and third pair is pulled out of the lateral cannula, and the threaded blue suture of the third pair in the needle is passed through the blue suture of the second pair. After retrieving the blue suture of the firrst pair through the anterior portal, it is pulled out to pass the blue suture of the third pair through the eyelet of the anteromedial anchor. The blue suture is linked between two anchors. The medial row of suture bridge is repaired with a sliding knot, and the sutures are not cut. Once the rotator cuff repair using the suture-bridge technique has been performed, the two blue strands in the anterior portal are tied. We describe our technique that possesses the advantages of both the double-pulley and suturebridge techniques, which improves the pressurized contact area and maximizes compression along the medial row.

• Clinics in Shoulder and Elbow
• /
• 제18권4호
• /
• pp.197-205
• /
• 2015

Background: The purpose of this study was to evaluate the postoperative magnetic resonance imaging (MRI) results of minimal-tying (one medial-row tie among 4 medial-row sutures) on the medial-row in double-row suture-bridge configuration ($2{\times}2$ anchor with $4{\times}4$ suture stands). Methods: From 2011 March to 2012 July, 79 patients underwent arthroscopic rotator cuff repair using $2{\times}2$ anchor double-row configuration. The mean age was 61.3 years (range, 31-81 years). Two double-loaded suture anchors were used for medial-row. Four medial-row stitches were made with only one medial-row knot-tying (the most anterior suture). Lateral-row was secured using the conventional suture-bridge anchor technique; all 4 strands were used for each anchor. Repair integrity was evaluated with MRI at mean 6.2 months postoperatively. Retear and the pattern of retear, change of fatty infiltration, and muscle atrophy of supraspinatus were evaluated using pre- and postoperative MRI. Results: Repaired tendon integrity was 38 for type I, 30 for type II, 6 for type III, 4 for type IV, and 1 for type V, according to Sugaya classification. Considering type IV/V as retear, the rate was 6.3% (5 out of 79 patients). Medial cuff failure was observed in 4 patients. Fatty atrophy of supraspinatus was significantly improved postoperatively according to Goutallier grading (p=0.01). The level of muscle atrophy of supraspinatus was not changed significantly after surgery. Conclusions: Minimal tying technique with suture configuration of four-by-four strand double-row suture-bridge yielded a lower retear rate (6.3%) in medium to large rotator cuff tears.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.210-210
• /
• 2009

For a bursal-side retracted laminated rotator cuff tear, simple repair of the retracted bursal-side rotator cuff might be insufficient because the repaired tendon could remain as an intratendinous tear of the rotator cuff. We present a repair method for intratendinous rotator cuff tears using the suture-bridge technique. We believe that this method helps to preserve the remnant rotator cuff tendon without tissue damage and restores the normal rotator cuff footprint in bursal-side delaminated rotator cuff tears.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2008년도 제16차 학술대회
• /
• pp.178-178
• /
• 2008

In order to improve static stability and healing of reattached labrum, we combined the advantages of suture bridge and transosseous technique. Using the conventional 3 portal for anterior instability, check stability of bony Bankart and preparation of glenoid bed in 3 way including removal, reshaping or mobilization of bony fragment. Two anchors were inserted to the superior and inferior portion and medial edge of bony Bankart lesion. It usually corresponded to the area of IGHL. Medial mattress sutures were applied around IGHL complex to get enough depth of glenoid coverage using suture hook. Make 3.5mm pushlock anchor hole to the articular edge of glenoid cartilage. Proximal suture bridge was applied at first and then distal suture bridge was inserted to mobilize the labrum in proximal direction. These construction can provide more stable labral repair with wide contact and compression in case of deficient bony stability. It not only avoids technical disadvantage of point contact with anchor fixation, but also decreasing gap formation through cross compression of labrum that couldn't gain even with the transosseous fixation which affords linear compression effect. Additional bony stability could be gained if the the bony fragment was mobilized to the glenoid margin with potential healing bed or reshaped for the good contact with reattached labrum.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2008년도 제16차 학술대회
• /
• pp.147-152
• /
• 2008