• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.46-48
• /
• 2004

A micro-scale discharge device has been fabricated using MEMS technology and failure mechanisms during DC discharge are investigated for the microstructure. The failure of sustaining the plasma is mainly caused by either open or short of the micro-electrodes, both resulting from the sputtered metal atoms during the DC discharge. The glow discharge lifetime of the microstructures is found to depend on bias circuit scheme as well as the electrode structure. Based on the understanding of the failure mechanism, a novel microstructure is suggested to improve discharge lifetime and the longer lifetime is experimentally demonstrated. In addition to the failure mechanism, an electric breakdown between two electrodes with microns gap are studied using micromachined metal structures. The electrode gap is able to be accurately controlled by thickness of a sacrificial layer and the electric breakdown was measured while varying the gap from $2{\mu}m$ to $20{\mu}m$. The electric breakdown behavior was found to highly depend on the electrode material, which was not considered in Paschen's law.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.396-399
• /
• 2008

In this study, the electric field distributions have been investigated by simulation in accordance with the various shapes of ITO-electrodes. Also we have measured the density of excited Xe atoms in the 1s5 state in discharge cell, where the gap distance of 60 um, gas pressure of 400 Torr, Xe contents of 7%, and sustaining voltage of 200 V are kept in this experiment. The maximum density of excited Xe atoms in the 1s5 state in a discharge cell for the fish-boned, T shaped and squared ITO electrodes have been measured to be $3.01\;{\times}\;10^{13}\;cm^{-3}$, $2.66\;{\times}\;10^{13}\;cm^{-3}$ and $2.06\;{\times}\;10^{13}\;cm^{-3}$, respectively. It is shown that the electric field distribution with different ITO Electrodes is essential factor for these maximum density of excited Xe atoms in discharge cell.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.401-406
• /
• 2003

New planar discharge structured AC-PDP has been developed by using TFCS (Thick Film Ceramic Sheet) technology. By applying TFCS to AC-PDP, a sustaining electrode and scanning electrodes are embedded in the TFCS. It is shown that panel performances such as electrical and optical characteristics are superior to commercialized coplanar AC-PDP as well as cost reduction. Moreover the experimental result shows panel performances can be improved drastically by continuous development.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.95-98
• /
• 2003

The positive column discharge characteristics in the long gap (440 ${\mu}m$) are investigated based on the voltage distribution among three electrodes. In particular, the effects of the amplitude and width of the short pulse applied to the address electrode on the positive column discharge characteristics are examined intensively. By proper controlling of the amplitude and width of the address short pulse, it is found that the positive column discharge in the long gap is well constructed. As a result, under the stable static voltage margin condition, the firing and sustaining voltages are as low as those of conventional short gap(60 ${\mu}m$) discharge($V _f=220V$, $V_s=150V$) and the color purity is improved. Moreover, the luminous efficiency increases up to 60% in comparison with the conventional case.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.235-238
• /
• 2009

To study the relationship between spark ignition and the gap in the nano-scale region, the electric potential was applied to between a Pt-Ir tip and a gold substrate. The tip was sharpened by electro-chemical etching process in the solution of $CaCl_2;H_2O$ and acetone. The radius of tip was measured to be around 200nm and attached to the scanning probe microscope to control the gap between the tip and the substrate. The electric potential of 10V to 80V was applied to initialize the spark. The gaps and the current profile were measured to analyze the characteristics of spark ignition. A spark sustaining time was measured to be between 50ns and 200ns depending on the applied electric potential and the gap between the electrodes. The continuous electric discharge was successfully sustained up to 1 second of spark or arc time. The developed process can be applicable to the micro-scale fabrication of automotive sensors as a similar concept of GTAW.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.710-713
• /
• 2005

In this study, waffle type barrier ribs for counter electrode discharge cells were prepared via micro-molding process. The master mold was prepared by UV lithography and working mold was manufactured by replicating the master mold. The UV paste used in this study consisted of ceramic powders for the barrier ribs, binder, hardener, and dispersant was filled into cavities of a polymeric mold by action of capillary pressure developed between mold and paste. The results demonstrated a possibility of one-step process for the manufacturing of waffle type barrier ribs embedded with sustaining electrodes.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1818-1820
• /
• 2000

Due to recent technology advances, needs for flat panel displays, plasma display panels(PDPs) whose advantages are simple structure, high resolution, wide viewing angle is increasingly expected to be the first flat panel of large screen, walt hanging TVs. But the luminance and luminous efficiency of color PDP is net up to the level of a CRT. So, New electrode shape which is different from the conventional electrode has to propose to improve the luminance and luminous efficiency. In this paper, we suggested new shaped electrodes. In new shaped electrode, the discharge current was reduced compared with conventional type by reducing the unnecessary diffusion loss near the barrier rib. However, the luminance was nearly the same as conventional type. So, the luminous efficiency improved about 35%.

• Journal of Information Display
• /
• v.5 no.2
• /
• pp.10-13
• /
• 2004

We have developed a new PDP cell structure called MARI(Multi Anode for Reduction of Ionic effect) and new driving scheme achieving a high luminous efficacy. The MARI PDP has middle electrode inserted between X and Y main electrodes. In the MARI PDP, reset and scan voltage is applied to middle electrode and sustain voltage is applied to X and Y electrode. Using a long gap sustain discharge we accomplished a high luminous efficacy. And we developed 42"full panel adopting MARI structure and new driving scheme and attained luminous efficacy of 2.35 lm/W.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.1-5
• /
• 2002

The sustain driver for AC plasma display panel should provide alternating high voltage pulses to ignite plasma and recover the energy discharged from the intrinsic capacitance between the scanning and sustaining electrodes inside the panel. In this paper, an efficient sustain circuit employing boost-up function is proposed to achieve a faster rise-time in order to be suitable to widely used the address display period separated (ADS) driving method. The proposed circuit improves the recovery efficiency, regardless of the variation of the panel capacitance. The principle of operation, features, and simulated results are illustrated and verified on a 7.5-inch diagonal panel at 200 [kHz] operating frequency based on experimental prototype.

• 전기의세계
• /
• v.23 no.4
• /
• pp.46-52
• /
• 1974

Generally, it has been regarded that there are two kinds of the effect of the electrodes, especially of the cathode in the gas discharge, (a) the effect caused by the difference of the cathode meterial and (b) the effect by the change of the cathode surface state even in the same meterials. Thus the two effects must be investigated independently to study the roles of the cathode in gas discharges. This paper measured sparking voltage in Rare gas (Ar, He) for the change of sparking voltage in repeating sparks and for the effect of (a) and (b) mentioned above, under the condition that the desorption of impurities from the cathod can be nigligible, and it is obtained that the correlative relations of the work function, sparking voltage and secondary coefficient are comparatively simple. In addition, the interesting character of the minimum point of the paschen's curves is found. The results were as follows; 1) The value of (pd)min with minimum pint of sparking voltage, (Vs)min, is 0.7-0.9 Torr. cm in Argon, but is 5.6-7.1 Torr. cm in Helium, and Paschen's curve in Helium shows slow curve than in Argon. 2) The minimum point of the Paschen's curve is satisfied actually Townsend's self sustaining criterion in Argon, but non-satisfaction in Helium, and the Townsend's secondary coefficient .gamma. action have compound property (.gamma.$_{i}$, .gamma.$_{p}$, .gamma.$_{m}$) in Helium. 3) The dependenting character of work function in Helium is less than in Argon. 4) The minimum point of sparking voltage increase under oxidized electrode than clear electrode in Au and Ag, but minimum point decrease in Ni and Cu.