• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.269-273
• /
• 2010

The primary objective of this work is to find the optimal condition for the granule tablet formulation of alfuzosin-HCl that aims to achieve a sustained drug release. (Hydroxypropyl)methyl cellulose (HPMC) is one of the most widely used polymer as a drug formulation and therefore has been utilized in this study as an excipient. Alfuzosin-HCl granule tablet was developed using the various viscosities of HPMC and the effects of viscosity on drug release was investigated. Fourier transform-infrared (FTIR) and X-ray diffraction (XRD) were employed to investigate the chemical structure and crystallization of alfuzosin-HCl in the formulation. We prepared the granule tablet by a direct compression method and studied the release profile in the stimulated intestinal fluid (pH 6.8). As the viscosity of HPMC increased the release of alfuzosin-HCl decreased, demonstrating that controlled release of alfuzosin-HCl can be achieved by varying the viscosity of HPMC.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.2
• /
• pp.67-73
• /
• 2011

Ion exchange resins can be one of the good carriers for sustained drug release. However, the sustained release may not be enough only with themselves and hence film coating with rate controlling polymers can be applied to have a further effect on the drug release. Due to the environmental and economic issues of organic solvent for the polymer coating, aqueous polymeric systems were selected to develop dosage forms. Among the many aqueous polymeric dispersions for the film coating, EC (ethylcellulose) based polymers such as Aquacoat$^{(R)}$ ECD and Surelease$^{(R)}$ were evaluated.A fluid-bed coating was applied as a processing method. The drug release rate was quite dependent on the coating level so the release rate could be modified easily by changing different levels of the coating. The drug release rate in the Aquacoat$^{(R)}$ coated resin particles was strongly dependent on curing, which is a thermal treatment to make homogeneous films and circumvent drug release changes during storage. After dissolution test using the compressed tablets in which the coated resin particles are contained, inhomogeneous coating and even pores could be observed showing that the mechanical properties of EC were not resistant to granulation and compaction process. However, when tablets were prepared in different batches, the release profiles were almost identical showing the feasibility of the coated resin particle as incorporated into the tablet formulation.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.2
• /
• pp.89-95
• /
• 1990

Ethylcellulose-PEG 4000 film coated on core tablets was investigated as a potential drug delivery system for the controlled release of chlorpheniramine maleate (CPM). The kinetic analysis of the release data indicated that CPM release followed a diffusion-controlled model, where the quantity released per unit area is proportional to the square root of time. The effect of the film composition, CPM concentration, plasticizer concentration and CPM solubility on the release characteristics were examined. The release rate constant increased as CPM concentration increased. It also increased as the PEG 4000 content in the film increased above 10%(w/w), however, it decreased as the PEG 4000 content increased in the concentration range below 10%(w/w). The release rate constant was not affected by the coated weight on the core tablet. The film-coated tablets which contain CPM only in the coated film layer seemed to be a potential oral drug delivery system for the controlled release of CPM.

• Korean Journal of Clinical Pharmacy
• /
• v.14 no.2
• /
• pp.78-84
• /
• 2004

Nifedipine, one of calcium channel antagonists, has been used for the treatment of mild to moderate hypertention, angina pectoris, Raynaud's phenomenon and various other cardiovascular diseases. Because of its short biological half-life, several sustained-release (SR) formulations of nifedipine have been developed. and used clinically. The bioequivalence of the two nifedipine SR preparations was evaluated according to the guidelines of KFDA. The test product was Hanmi Nifedipine SR $tablet^{(R)}$ made by Hanmi Pharm. Co. and the reference was Adalat Oros $tablet^{(R)}$ made by Bayer Korea. Thirty healthy male subjects were divided into two groups and a randomized $2\times2$ cross-over study was employed. After one SR tablet containing 33 mg of nifedipine was orally administered, blood sample was taken at predetermined time intervals and the concentrations of nifedipine in plasma were determined using a validated HPLC method with UV detector. Two pharmacokinetic parameters, $AUC_t\;and\;C_{max}$, were calculated and analyzed statistically for the evaluation of bioequivalence of the two products. Analysis of variance was carried out using logarithmically transformed parameter values. The $90\%$ confidence intewals of the $AUC_t\;and\;the\;C_{max}\;were\;log\;0.81\sim1og\;1.19\;and\;log\;0.84\sim\;log\;1.13,\;respectively.$ These values were within the acceptable bioequivalence intervals from log 0.8 to log 1.25 in KFDA guidelines. Thus, the criteria of the KFDA guidelines for the bioequivalence was satisfied, indicating that Hanmi Nifedipine SR tablet is bioequivalent to Adalat Oros tablet.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.6
• /
• pp.401-409
• /
• 2009

Ketrorolac tromethamine (KT), a nonsteroidal anti-inflammatory drug (NSAID) is required repeated administration due to its short blood half-life. To avoid dose-dependent side effects of KT, sustained-release pellets containing KT were prepared by coating with Eudragit$^{(R)}$ RS 100 and Eudragit$^{(R)}$ NE 30D. The in vitro and in vivo drug release behavior of KT from Eudragit$^{(R)}$ RS 100 and NE 30D coated pellet (SR-A), Eudragit$^{(R)}$ RS 100 coated pellet (SR-B) and conventional commercial immediate-release tablet (IR) was investigated. KT from SR-A and SR-B was slowly released over several hours, whereas IR showed rapid initial release in vitro. The pharmacokinetic study in vivo was performed by oral administration in beagle dogs. 5 mg IR was administered 3 times at intervals 5 hr. Five milligrams of IR was administered 3 times at intervals of 5 hr and 15 mg of SR-A and SR-B did once. After administering IR, KT concentration in blood showed high peak- trough fluctuation and stomach ulcer were discovered. On the other hand, SR-A and SR-B sustainedly released KT and reduced the occurrence of stomach ulcer. There sustained-release pellets will be effective system to minimize dosedependent of side effect and improve patient compliance.

• YAKHAK HOEJI
• /
• v.34 no.3
• /
• pp.155-160
• /
• 1990

An oral adhesive tablet of acyclorir [9-(2-hydroxyethoxymethyl) guanine] for herpetic stomatitis was prepared and its physical properties were evaluated. 300 mg weighed tablets containing 30 mg of acyclovir were prepared with six kinds of polymers from direct compression, and the stickiness, fracture resistance and dissolution in pH 6.8 buffer solution were tested. HPMC and MC showed good stickiness and fracture resistance, and their dissolution rates were significantly different from each other. Three factors-HPMC:MC ratio, acyclovir content, compression force-were chosen as an important factor of manufacture and factorial analyses for these three factors were carried out. Eight kinds of formulations from different combination of three factors were prepared and tested in stickiness, fracture resistance and dissolution in pH 6.8 buffer solution. Dissolution rate was significantly affected by polymer ratio, fracture resistance was affected by compression force, and stickiness was not significantly affected by acyclovir content and polymer ratio.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.215-222
• /
• 2020

Metformin is a recommended first-line therapy drug for type 2 diabetes patients. However, compared to other oral antidiabetic drugs (OAD), metformin has a large unit dosage, with bioavailability of 40-60%. This limiting bioavailability is because metformin is absorbed only in the upper gastrointestinal tract as a BCS class 3 drug. Hence, we propose that applying the Gastroretentive Drug Delivery System (GRDDS) and extending drug release time in the stomach will result in improved bioavailability. We selected the swelling type delivery system, as it is considered the most stable gastroretention technology compared to other GRDDSs. We modified the swelling excipient by using a natural swelling excipient to form a swelling tablet made of carrageenan and hydroxypropyl methylcellulose (HPMC). Our results indicate that the swelling complex tablet made of carrageenan and HPMC has a good swelling ability and shows required sustained release in a dissolution pattern. In addition, the carrageenan complex has a better swelling ability than the marketed metformin tablet, as determined by the ratio, (swelling ability)/(excipient weight). Taken together, our results indicate that the carrageenan complex can be developed as a good swelling excipient. Further optimizations are required for the commercialization of the carrageenan complex.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.3
• /
• pp.185-190
• /
• 2002

To improve the solubility of poorly water-soluble drug and to develop a sustained release tablets, the need for the technique, the formation of solid dispersion with polymeric materials that can potentially enhance the dissolution rate and extent of drug absorption was considered in this study. The 1:1, 1:4, and 1:5 solid dispersions were prepared by spray drying method using PVP K30, ethanol and methylene chloride. The dissolution test was carried out at in phosphate buffer solution at $37^{\circ}C$ in 100 rpm. Solid dispersed drugs were examined using differential scanning calorimetry and scanning electron microscopy, wherein it was found that felodipine is amorphous in the PVP K30 solid dispersion. Felodifine SR tablets were prepared by direct compressing the powder mixture composed of solid dispersed felodipine, lactose, Eudragit and magnesium stearate using a single punch press. In order to develop a sustained-release preparation containing solid dispersed felodipine, a comparative dissolution study was done using commercially existing product as control. The dissolution rate of intact felodipine, solid dispersed felodipine and its physical mixture, respectively, were compared by the dissolution rates for 30 minutes. The dissolution rates of felodipine for 30 minutes from 1:1, 1:4, 1:5 PVP K30 solid dispersion were 70%, 78% and 90%. However, dissolution rate offelodipine from the physical mixture was 5% of drug for 30 minutes. Our developed product Felodipine SR Tablet showed dissolution of 17%, 50% and 89% for 1, 4, and 7 hours. This designed oral delivery system is easy to manufacture, and drug releases behavior is highly reproducible and offers advantages over the existing commercial product. The dissolution rate of felodipine was significantly enhanced, following the formation of solid dispersion. The solid dispersion technique with water-soluble polymer could be used to develop a solid dispersed felodipine SR tablet.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.1
• /
• pp.7-12
• /
• 1999

The captopril matrix tablets composed of polyethylene oxide(PEO) was prepared and administered to beagle dogs. Captopril matrix tablets were prepared using direct compressed method and wet granulation compressed method with various ratios of drug to PEO. The diffusion rate of captopril matrix tablets followed on the Higuchi's diffusion model. With increasing hardness of captopril matrix tablets, release rate was decreased. Each formulation was evaluated by the area under the curve (AUC) and time course of plasma captopril concentration after oral administration to beagle dogs. The $AUC_{0-12}$ were $9.126\;{\mu}g\;h/ml$ and $6.417\;{\mu}g\;h/ml$ for the matrix tablets and conventional tablets, respectively. Therefore, the bioavailability of captopril matrix tablets was greater than that of commercial product. It is suggested that captopril matrix tablets using PEO is a useful sustained release formulation.

• Parasites, Hosts and Diseases
• /
• v.44 no.4 s.140
• /
• pp.361-366
• /
• 2006

Sustained-releasing praziquantel (SRP) tablet was designed for single dose treatment regimen of clonorchiasis. A previous pre-clinical study confirmed its sustained-releasing characteristics and a better cure rate than conventional praziquantel (PZQ). In this clinical study, the pharmacokinetics of this SRP tablet were investigated in human volunteers (phase 1; 12 volunteers), and its curative efficacy was examined in clonorchiasis patients (phase 2; 20 volunteers). In the phase 1 clinical study, blood concentrations of both tablets showed wide individual variation. The $AUC_{last}$ of SRP was $497.9{\pm}519.0ng{\cdot}hr/ml\;(mean{\pm}SD)$ and PZQ of $628.6{\pm}695.5\;ng{\cdot}hr/ml$, and the $AUC_{inf}$ of SRP was $776.0{\pm}538.5\;ng{\cdot}hr/ml$ and of PZQ $658.6{\pm}709.9\;ng{\cdot}hr/ml$. $C_{max}$ values of SRP and PZQ were $90.7{\pm}82.2ng/ml\;and\;214.9{\pm}251.9\;ng/ml$, and $T_{max}$ values were $3.42{\pm}1.43\;hr\;and\;1.96{\pm}1.23\;hr$, respectively. SRP tablets showed similar AUC values, but lower $C_{max}$ and longer $T_{max}$ values than PZQ. In the phase 2 study, SRP at 30 mg/kg (single dose) achieved a 60% cure rate and a 95.5% egg reduction rate. The cure rate of a single dose SRP was unsatisfactory compared with that of the conventional PZQ dose, but much better than that achieved by a single dose PZQ.