• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2002년도 정기학술대회
• /
• pp.227-233
• /
• 2002

Suspension system is one of the most important components indespensible for stability and reliability of automobiles. The demands to more safe and durable suspension system have been increased as the automobiles get popular and improve in quality. The crack in the coil spring of the suspension system produced during manufacturing may grow under a fatigue load and cause a severe safety problems which lead to a catastrophic damage to the passengers. Many conventional NDT techniques including ET, RT, and UT are less sensitive or hard to apply to detect the surface breaking crack in the suspension coils partly because the techniques are point-to-point measurement methods, thus take too long time to inspect the coil spring longer than 1m. Contrary to this, Lamb wave technique is full-field measurement method that make it possible to examine the whole coil spring in real time. In this paper, the Lamb wave is applied to the coil spring to investigate the possibility to detect the cracks on the surface of the coil spring.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.175-181
• /
• 1998

The coil spring is used in the suspension of automotive vehicles and small omnibus. Recently, it can be adopted hardening type spring which spring constant is accompanied by increasing displacement to increase passenger comfortability. One of methods which assert this characteristic is cylindrical-taper section coil spring. In this paper we calculate ideal spring characteristic curve from the given vehicle conditions, and show the design method of the cylindrical-taper section coil spring.

• International Journal of Reliability and Applications
• /
• 제5권1호
• /
• pp.37-46
• /
• 2004

Coil spring of automobile suspension system is very important to safety and dynamics of passenger car and requires a highly advanced quality control during manufacturing processes. Surface cracks on the coil spring rod produced by mechanical machining and heat treatment may cause a severe accident and large cost to the manufacturer. In order to detect surface cracks of the rod, guided wave technique is applied for a fast total volumetric inspection. Pochhammer equation is studied to investigate the dispersion characteristics of the guided wave in the spring rod and optimal wave modes sensitive to the surface crack are selected experimentally to design the experimental arrangement for the generation of guided wave. Rod samples with different size of artificial axial EDM notch on the surface ranging from 50${\mu}{\textrm}{m}$ to 1 mm are examined by guided wave and inspection results discussed.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.84-90
• /
• 2018

철도차량의 거동을 해석하기 위하여 다물체 동역학 모델을 구성함에 있어 현가시스템을 구성하는 스프링, 댐퍼와 같은 현가요소에 대한 스프링강성이나 감쇠계수와 같은 물성치 파악은 매우 중요하다. 그 중 1차, 2차 현가시스템에 주로 활용되고 있는 코일스프링에 대한 동역학 모델을 구성함에 있어 축방향 강성은 도면이나 설계자료에 명확하게 명시되어 있지만 횡방향에 대한 물성은 명시되어 있지 않아 동역학 해석 모델 구성에 어려움을 안고 있다. 따라서 본 논문에서는 철도차량의 현가시스템에 폭 넓게 적용되고 있는 코일스프링에 대한 횡강성을 해석하기 위한 모델에 대하여 검토하고자 한다. 코일스프링 시료에 대한 횡강성을 해석하고자 유한요소해석 방법을 수행하였고 Krettek와 Sobczak의 코일스프링 횡강성 해석모델을 적용하여 수치해석을 수행하였다. 그리고 코일스프링 시료를 대상으로 횡강성 특성시험을 수행하여 해석모델과의 적합성을 검토하였다. 시험결과와 비교한 결과, Krettek와 Sobczak의 코일스프링 횡강성 해석모델을 적용하고 보정계수를 수정한 결과가 시험결과에 근사한 결과를 얻을 수 있었다.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.98-105
• /
• 1998

In the automotive suspension system, especially, Mcpherson strut type, if the resultant of the force through tire and the link reaction force is not coincident with the spring force, the side load against shock-absorber occur. The magnitude of side load is proportional to the difference between resultant force and spring force. To reduce side load, several method can be used, and one is to use the side load coil spring. This study summarize the development results of side load coil spring, i.e., how to design, analysis, manufacture, and test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.102-107
• /
• 2004

Suspension part should have enough endurance during its lifetime to protect passenger. Therefore, the coil spring is one of the major suspension part of an automobile. Corrosion fatigue strength of the coil spring depends on many factors including mechanical and environmental properties. In this paper, residual stresses by shot peening was analyzed using finite element analysis and evaluated its effect on corrosion fatigue strength.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.798-803
• /
• 2006

The suspension elements like primary coil spring, yaw damper, body to body damper are core parts of high speed railway bogie and the faults relating to these elements are reported recently. Thus, this study is started to analyze the displacements characteristics of suspension elements of high speed railway rolling-stock for the purpose of preventing the faults and developing the maintenance technology for suspension elements like spring and dampers. For this purpose, we made a plan to measure the displacements of the primary coil spring, yaw damper and body to body damper in actual running condition. We developed the measurement device to measure the longitudinal displacement and angular displacement of suspension elements and installed this device to test suspension elements. Test to measure displacements of suspension elements is conducted in service line of high speed railway. The displacement data which is acquired from the test with actual vehicles was analyzed for its maximum displacement depending on the track sections. As a result of analysis, we obtained the displacement trends occurring with the sections and valuable results like maximum values and the displacement distribution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.821-822
• /
• 2012

• 산업기술연구
• /
• 제20권B호
• /
• pp.105-113
• /
• 2000

Air springs are now widely used in bus or truck suspensions due to their advantages over conventional metal spring as coil or leaf springs. Air springs have soft spring rates, which give better ride quality, and additional leveling system provides constant ride height and maintains almost same vertical natural frequencies. A mathematical model of an air spring suspension system with height control system is constructed and dynamic responses of the suspension system are investigated in the light of leveling valve motion characteristic, vertical motion natural frequency. Also, using a full vehicle model, handling characteristics of an air spring suspension is studied and the results are compared with real test results, which shows good agreements.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.877-881
• /
• 1996

승용차나 소형승합차에는 현가장치의 스프링으로 코일스프링을 많이 사용하고 있으며 최근 들어 승차감의 상을 위해 변위의 증가와 함께 스프링 정수가 증가하는 경화 특성 스프링(hardening type spring)을 많이 채택하고 있는데, 이 특성을 나타낼 수 있는 방법 중 하나가 등반경-테이퍼 소재의 코일스프링이다. 이 논문에서는 주어진 차량조건으로부터 이상적인 스프링 특성곡선을 계산하고 이 곡선을 분할하여 직선의 연결로 근사시켜 분할한 수만큼의 직선적 특성의 스프링으로 직렬 연결되어 있다고 가정하여 이 곡선에 근접된 특성을 가지는 등반경-테이퍼 소재 코일 스프링의 설계방법을 제시하고자 한다.