• 품질경영학회지
• /
• 제38권3호
• /
• pp.449-462
• /
• 2010

In this Paper, We analyzed influence Factor to TPM Performance in medium and small enterprises by empirically. By Literature survey, We hypothesize education training and 5S influence to individual improvement, independence maintenance, planning and foresight, which also influence to flexibility, total equipment performance, quality, which finally influence to lower cost, delivery date. To analyze empirically, we survey questionnaire in medium and small enterprises being below 300 people. From statistical analysis, 7 hypotheses are rejected, which is different existing research. This is analyzed that reflect actuality that medium and small enterprises is different from large enterprises. We expect that result of this treatise does concentration effort in important factor to get TPM performance in medium and small enterprises.

• 한국식품조리과학회지
• /
• 제7권4호
• /
• pp.103-109
• /
• 1991

The purpose of this study was to evaluate the foodservice management practices in day care centers in order to provide basic information and guideline for development of foodservice facilities standard model and sanitation manuals. Basic survey and evaluation were done for 24 day-care centers categorized in four groups. General foodservice management practies, status of equipment, and hygienic conditions were evaluated. The results of the survey showed the followings: the cost of lunch and the cost of interim snack varied very much among each group; development of standard recipe as well as purchase of foods were not done by an expert; the hygienic condition of kitchens and dining-room needed more attention for improvement; the sanitary practies of employees showed potential problems; kitchen facilites were not standardized, especially only 20.8% of the facilities were equipped with the three-compartment sink, which was regarded as essential.

• 대한가정학회지
• /
• 제36권2호
• /
• pp.35-46
• /
• 1998

The purpose of this study was to investigate the space feature of day care center in Taegu city. This study was conducted by means of the observation on the equipments, the actual measurement of space of day care center and environment, and the questionnaire survey by the chief of day care center. The samples for analysis were 20 day care center located in Taegu city. The Major findings were as follows; 1) The chief's satisfaction of the facilities of day care center was generally low. 2) The door design, the lighting conditions, and the toilet need to be improved. 3) According to observation on the equipment, it was suggested that the environment of day care center was not desireable.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.229-234
• /
• 2011

Feasibility assessment for small hydropower plants using diversion weirs located in stream for agricultural purpose has been studied. The model, which can predict flow duration characteristic of stream, was developed to analyze the inflow caused from rainfall. And another model to predict hydrologic performance for small hydropower plants is established. Preliminary survey was performed identifying several candidate sites, and two sites were selected finally for actual site reconnaissance. During the course of site survey, generating capacity, construction and equipment cost, and payback through life time of each sites were calculated for economical feasibility analysis. The results of this study have estimated that the small hydropower plants using diversion weirs for agricultural purpose may offer better opportunities in future with increasing fuel cost and nation's energy policy.

• 항공우주시스템공학회지
• /
• 제3권1호
• /
• pp.6-11
• /
• 2009

It is anticipated that quality assurance for the Ka band Communication Payload System(COPS) development program of the communication, Ocean & Meteorological Satellite(COMS) may be a core technical factor to be concerned in order to avoid any failure, and to assure its final performance during the mission lifetime in space. Those can be managed and verified and assessed by performing the Quality Assurance (QA) and risk management which helps to prevent and to reduce the critical fails. This paper introduces the Product Assurance (PA) system and procedures for controlling and monitoring sub-contractors which were participated in Ka band Communication Payload System (COPS) development. Also this paper shows Quality Assurance (QA) procedures and detailed their processes for assured the product performed by local companies from site survey for selecting companies to delivery of their equipment.

• 한국포장학회지
• /
• 제8권1호
• /
• pp.32-42
• /
• 2002

This study were conducted to reveal the awareness and competitiveness of Korean packaging industry in information technology(IT) and e-commerce. For the survey, 114 sample companies were selected representing all packaging materials, equipment and systems, institutes, consulting and trading companies. The trained interviewers spoke to the respondents who were at the position of packaging research and development and were considered knowledgeable about the level of IT in the company. The collected data were analyze in three major categories: IT fundamentals, usages, and company policy. From the results, packaging suppliers were at the very low level of IT fundamentals and uses compared to those of packaging users. The gap between packaging suppliers and users that access the Internet was seriously wide, and this trend was generally due to different size of company. Packaging suppliers were still at the basic level of information-oriented working environment.

• 지구물리
• /
• 제6권2호
• /
• pp.79-87
• /
• 2003

An in-situ four-electrode contact resistivity probe system was designed, and field-tested in submarine sediments. Seismic survey was also performed to support and compare the results of electric survey. The probe was designed to be driven to selected depths below the seafloor using a Vibracore system. The four insulated electrodes were, spaced equidistant across the wedge, were extended beyond the probe tip to minimize effects of sediment disturbance by the wedge insertion. In-situ measurements of resistivity were recorded on board by precision electronic equipment consisting of signal generators and processors, and by temperature- monitoring systems. Overall limits of uncertainty at respective depths below the seafloor are up to ±10% of the measured values. Best estimates of conductivity are considered to be ±3 percent of the reported values. Resistivity measurements were made at six sites in carbonate sediments to a maximum depth of penetration of about 5 m. Average values of conductivity range between 0.88 and 1.21 mho/m. The results show the seabed is composed of alternating layers of relatively high-conductivity material (0.8 to 1.4 mho/m) in thicknesses of more or less one meter and layers about 30 cm thick having relatively low conductivities (0.4 to 0.8 mho/m).

• Imaging Science in Dentistry
• /
• 제53권1호
• /
• pp.35-42
• /
• 2023

Purpose: This study investigated the current dental radiology reporting methods and the recording rate of 10 mandatory reporting items in Korea. Materials and Methods: An original online survey created using Google Forms was distributed to dental practitioners. The survey asked about the participants' age, experience, workplace, use of radiologic equipment, radiology reporting methods, and recording reporting items. Results: In total, 354 responses were analyzed. Radiologic reporting in dental charts was the most commonly used method for each modality. Four out of 10 mandatory items were recorded at a high rate, but the remaining 6 items had substantially lower recording rates, often below 50%. The participants who reported radiographic findings through other separate methods had higher item scores than those who wrote findings in dental charts(P<0.05). Conclusion: Radiologic societies and dental associations should encourage the use of separate reports for radiographic examinations. Education regarding radiology reports and the justification for reporting items should be reinforced in dental schools, training courses on radiology, and the continuing education curriculum.

• 한국산업보건학회지
• /
• 제29권2호
• /
• pp.217-225
• /
• 2019

Objectives: The aim of this study is to evaluate the quality management systems of domestic asbestos survey and monitoring service providers and the relationships with the number of licenses or designations and sales performances. Methods: Data on quality management systems were collected by assessors who were assigned by the Korea Occupational Safety and Health Agency(KOSHA) during a pilot evaluation program for designated asbestos survey and monitoring service providers in 2016 using evaluation criteria developed by KOSHA. Basic characteristics, evaluated scores, and sales performance were gathered and statistically analyzed. Results: The median and arithmetic mean of the total scores were 0.64 and 0.66. Evaluation fields that scored highly with the highest percentages were sales performance, installation and availability of equipment, compliance with the mandatory minimum number of airborne samples, laboratory independence, and results of proficiency analytical testing, in that order. Evaluation fields that received low marks with the highest percentages were the training of personnel, blank field samples, calibration of flow rates, preliminary check and visual inspection of the work area prior to the clearance test, and review and approval of final reports, in that order. Comparison of normalized scores between service providers registered for asbestos and other tasks and those designated for only asbestos showed significant differences in their evaluated scores. Sales performance did not show a positive correlation with evaluated scores. Conclusions: The quality management systems of domestic asbestos survey and monitoring service providers were poor. High scores were recorded mostly in evaluation fields related to regulatory requirements. Low scores were recorded mostly in evaluation fields related to documentation and recordkeeping. Considering the low influence of quality on sales performance, the government needs to evaluate the quality management of asbestos survey and monitoring service providers and provide the results to public in order to address their low levels of quality management.

• Architectural research
• /
• 제18권4호
• /
• pp.185-190
• /
• 2016

This study aimed to investigate whether protestant religious facilities are maintained appropriately for people and regular inspections are conducted. As a study method, survey and site investigation were conducted. The survey questionnaire aimed to know the perception of users or responsible persons about safety management and current status of safety management systems while the site investigation aimed to inspect structural conditions by a visual inspection such as proper installation of fire protection equipment and whether regular inspection were conducted. It was found, through the inspection of the current safety management status, that the safety management related persons did not know which parts and how much they manage incorrectly, and did not know the follow-up actions in case of accidents. Therefore, it is essentially required to assign a proper person to the facilities for safety management and to have safety consciousness education. Furthermore, although more than 80% of the surveyed subjects responded that they were familiar with the way to use safety management related facilities and overall instructions, the respondent were concerned about the correspondent training for emergent circumstances.