• 한국광학회지
• /
• 제4권4호
• /
• pp.390-396
• /
• 1993

1차원 telecentric paraxial holographic kinoform을 푸리에변환 렌즈로 사용하는 경우에 있어서, 3가지 표면양각형태, 즉 평면-볼록면, 블록면-평면, 좌우대칭 불록면에 대하여 스넬의 법칙을 기반으로 하는 엄밀한 광성추적법을 적용하여 분석하였다. kinoform은 F/8, 초점거리 15mm이며 kinoform과 그 주변 매질의 굴절율을 변화시키므로써 zone수와 두께 그리고 포물면의 경사도를 변화시켰다. 일반적으로 좌우대칭 볼록면 형태가 가장 좋은 성능을 갖는 것으로 나타났고, 모든 경우에 있어서 포물면의 경사도가 증가함에 따라 입사각의 증가에 따른 성능이 저하되었다.

• 대한교통학회지
• /
• 제34권6호
• /
• pp.489-498
• /
• 2016

이 연구는 어린이 보호구역과 인근지역의 교통사고를 다루고 있다. 이 연구의 목적은 공간적 특성을 고려한 어린이 교통사고모형을 개발하는데 있다. 이를 위해 이 연구는 2012-2014년 동안 청주시 초등학교 60개소에서 발생한 어린이 교통사고 자료를 수집하였다. 연구의 주요 결과는 다음과 같다. 첫째, 통계적으로 유의한 두 개의 어린이 교통사고(사고건수 및 EPDO) 모형이 개발된다. 가산자료 모형 중 포아송 모형이 선택되며, 모형의 우도비는 0.533 및 0.273로 분석 된다. 둘째, 모형의 공통변수로는 4차로 이상의 도로 비율, 진출입구 수, 어린이 보호구역내 신호 횡단보도 수, 어린이 보호구역 표지판 수, 어린이 보호구역 노면표지 수 및 속도제한 표지 수인 것으로 분석된다. 특정변수는 대상지 내 도로 연장, 도로 반사경 및 어린이 보호구역 외 신호 횡단보도 수로 평가된다. 마지막으로 이 연구는 어린이가 많은 도로에서는 운전자의 주의 및 인지를 향상시킬 수 있는 시설이 필요하다는 것을 보여준다.

• 한국환경과학회지
• /
• 제23권2호
• /
• pp.207-218
• /
• 2014

A ventilation model was developed for predicting the air change per hour(ACH) in buildings and the airflow rates between zones of a multi-room building. In this model, the important parameters used in the calculation of airflow are wind velocity, wind direction, terrain effect, shielding effect by surrounding buildings, the effect of the window type and insect screening, etc. Also, the resulting set of mass balance equations required for the process of calculation of airflow rates are solved using a Conte-De Boor method. When this model was applied to the building which had been tested by Chandra et al.(1983), the comparison of predicted results by this study with measured results by Chandra et al. indicated that their variations were within -10%~+12%. Also, this model was applied to a building with five zones. As a result, when the wind velocity and direction did not change, terrain characteristics influenced the largest and window types influenced the least on building ventilation among terrain characteristics, local shieldings, and window types. Except for easterly and westerly winds, the ACH increased depending on wind velocity. The wind direction had influence on the airflow rates and directions through openings in building. Thus, this model can be available for predicting the airflow rates within buildings, and the results of this study can be useful for the quantification of airflow that is essential to the research of indoor air quality(temperature, humidity, or contaminant concentration) as well as to the design of building with high energy efficiency.

• 한국실내디자인학회논문집
• /
• 제26권5호
• /
• pp.143-151
• /
• 2017

This study aims to analyze the design of public libraries which act as anchors in culture-led urban regeneration. They have been built as city's symbols as well as catalysts to revitalize city centers and urban spaces since the 1990s. This study finds that the public libraries play roles in the urban development as cultural icons, multi-functional spaces, and public domain. This study examines the five examples of the libraries and finds their important design qualities as follow. First, public libraries are planned to symbolize local culture and history as cultural icons. The shapes of public libraries are expressed with sculptured cultural icons, while their facades are designed to signify cities' identities and images. Second, public libraries in culture-led urban regeneration have multi-functional spaces which provide diverse activities and experiences to visitors. The libraries often have galleries and theaters for cultural life, cafes and shops for daily uses, educational facilities, as well as public services, parking, and transport systems that connect to urban infrastructure. Third, the public libraries become the anchors of surrounding public spaces and cultural buildings. The libraries have the sequences of approach from entry plazas, transitional zones, and entrances to lobbies. Especially the transitional zones between the libraries and the cities that are covered with giant cantilevers expand the libraries' space and establish attractive urban spaces. Forth, the libraries employ nature and cityscapes in their design. The surfaces and openings of the libraries are adjusted to allow many attractive views to visitors. Fifth, the libraries have big lobby spaces which are the centers of the buildings as well as the public domain. The lobby spaces are designed as in-door spaces like out-doors with vertical and horizontal openness that allow the natural flows of light from ceilings, glass walls and vertical voids.

• 한국터널지하공간학회 논문집
• /
• 제6권3호
• /
• pp.227-235
• /
• 2004

터널의 시공은 터널주변 지반에 구조적인 손상과 시공상의 손상을 불러일으킨다. 여기서의 구조적인 손상이란 터널굴착으로 인한 원지반응력의 교란으로 인하여 발생하는 것을 의미하며, 시공상의 손상이란 시공방법에 따른 주변지반의 손상을 의미한다. 본 논문에서는 원지반의 특성과 시공 중 손상을 고려할 수 있는 Hoek과 Brown 2002년도 공식을 이용하여 터널주변 탄 소성 영역에 작용하는 접선 및 반경방향의 응력 산정을 위한 식과 터널 주변 소성영역의 산정방법이 제시되었다. 또한, 매개변수분석을 통하여 암반의 등급, 무결암의 일축압축강도, 그리고 터널의 크기와 소성영역간의 상관관계를 조사하였으며, 기존의 연구에서 제안된 방법과의 비교를 통하여 본 연구에서 제안된 방법의 정확도를 검증하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.376-383
• /
• 2005

In this study, we conducted geophysical investigations for the organization of integrated geophysical methods to detect underground cavities of ground subsidence area at the field test site, located at Yongweol-ri, Muan-gun. We examined the applicability of geophysical methods such as electrical resistivity, electromagnetic, and microgravity to cavity detection with the aid of borehole survey results. Underground cavities are widely present within the limestone bedrock overlain by the alluvial deposits in the area of the test site where the ground subsidences have occurred in the past. The limestone cavities are mostly filled with groundwater and clays in the test site. Thus, cavities have low electrical resistivity and density compared to the surrounding host bedrock. The results of the study have shown that the zones of low resistivity and density correspond to the zones of the cavities identified in the boreholes at the site, and that the geophysical methods used are very effective to detect underground cavities. Furthermore, we could map the distribution of cavities more precisely with the test results incorporated from the various geophysical methods. It is also important to notice that the microgravity method is a very promising tool since it has rarely used for the cavity detection in korea. Beyond the investigation of underground cavities, the geophysical methods are required to provide useful information for the reinforcement design for the ground subsidence areas. It is, therefore, necessary to develop integrated geophysical technique incorporating different geophysical methods to precisely map underground cavities and image the subsurface of the ground subsidence areas.

• 터널과지하공간
• /
• 제27권2호
• /
• pp.77-88
• /
• 2017

연구지역의 지질은 주로 역암과 사암, 협재한 셰일 및 현무암류로 구성되고, 신생대 말에서 최근기간 동안 여러 번의 취성변형작용과 다양한 응력장을 거치면서 비교적 최근까지 움직임이 확인된 암반으로서 단층작용의 영향을 많이 받아 파쇄가 심한 완만한 지형을 형성한다. 비탈면은 북북동주향의 태곡단층과 서북서 주향의 북곡단층이 교차하는 지역에 위치하며, 그 구성 암반에는 여러 규모의 수많은 단층과 단층대 및 파쇄대가 발달하고 있다. 본 연구에서는 비탈면에 대한 지질특성을 파악하고 이에 따른 대책공법을 제시하고자 한다. 연구지역 비탈면에 대한 대책공법으로 시공 중 혹은 보강이 완료된 이후에도 주변도로 및 지반에 대한 안전관리를 위하여 각 구조물별 사안에 따라 계측기를 설치하여 주기적인 계측 및 분석이 꾸준히 수행되어야 할 것으로 사료된다.

• 지구물리와물리탐사
• /
• 제12권1호
• /
• pp.27-32
• /
• 2009

이 연구는 한국 남서쪽에 위치한 무안군 용월리의 카르스트 지역에서 지하 공동 탐지를 위하여 3차원 전기비저항탐사의 적용성을 시험한 것이다. 현장 조사지역은 과거에 지반침하가 발생하였으며, 지하 공동은 충적층 하부에 분포하고 있는 석회암내에서 발견된다. 석회암 공동은 대부분 지하수와 점성토로 충진 되어 있기 때문에 주변의 기반암에 비하여 전기비저항이 상대적으로 낮게 나타난다. 이 연구 결과에 의하면 시추공에서 인식되고 있는 공동 분포대가 저비저항대와 일치하고 있으며, 이로부터 3차원 전기비저항탐사가 카르스트 지역에서의 지하 공동을 탐지하고 영상화 하는데 매우 유용함을 입증했다.

• Structural Engineering and Mechanics
• /
• 제53권3호
• /
• pp.481-495
• /
• 2015

Many hydropower stations in southwest China are located in regions of brittle rock mass with high geo-stresses. Under these conditions deep fractured zones often occur in the sidewalls of the underground caverns of a power station. The theory and methods of fracture and damage mechanics are therefore adopted to study the phenomena. First a flexibility matrix is developed to describe initial geometric imperfections of a jointed rock mass. This model takes into account the area and orientation of the fractured surfaces of multiple joint sets, as well as spacing and density of joints. Using the assumption of the equivalent strain principle, a damage constitutive model is established based on the brittle fracture criterion. In addition the theory of fracture mechanics is applied to analyze the occurrence of secondary cracks during a cavern excavation. The failure criterion, for rock bridge coalescence and the damage evolution equation, has been derived and a new sub-program integrated into the FLAC-3D software. The model has then been applied to the stability analysis of an underground cavern group of a hydropower station in Sichuan province, China. The results of this method are compared with those obtained by using a conventional elasto-plastic model and splitting depth calculated by the splitting failure criterion proposed in a previous study. The results are also compared with the depth of the relaxation and fracture zone in the surrounding rock measured by field monitoring. The distribution of the splitting zone obtained both by the proposed model and by the field monitoring measurements are consistent to the validity of the theory developed herein.

• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.595-609
• /
• 2017

Due to high in-situ stress and brittleness of rock mass, the surrounding rock masses of underground caverns are prone to appear splitting failure. In this paper, a kind of loading-unloading variable elastic modulus model has been initially proposed and developed based on energy dissipation principle, and the stress state of elements has been determined by a splitting failure criterion. Then the underground caverns of Dagangshan hydropower station is analyzed using the above model. For comparing with the monitoring results, the entire process of rock splitting failure has been achieved through monitoring the splitting failure on side walls of large-scale caverns in Dagangshan via borehole TV, micro-meter and deformation resistivity instrument. It shows that the maximum depth of splitting area in the downstream sidewall of the main power house is approximately 14 m, which is close to the numerical results, about 12.5 m based on the energy dissipation model. As monitoring result, the calculation indicates that the key point displacement of caverns decreases firstly with the distance from main powerhouse downstream side wall rising, and then increases, because this area gets close to the side wall of main transformer house and another smaller splitting zone formed here. Therefore it is concluded that the energy dissipation model can preferably present deformation and fracture zones in engineering, and be very useful for similar projects.