• 한국건축시공학회지
• /
• 제4권4호
• /
• pp.135-142
• /
• 2004

The purpose of this study is to predict remodeling timing of Permanent Rental Housing through historic data and cash flow analysis. For this aim, the study has estimated cash flow of Permanent Rental Housing considering initial construction costs, government supporting fund, rental incomes and maintenance expenses. Based on the expected cash flow analysis, reasonable remodeling timing is predicted for Permanent Rental Housing. The results of this study are as follows: (1) it is analyzed that building a8e of about 27 years is the best time for remodeling because cumulative surplus amounts reach maximum level, (2) it is required that remodeling should be made before 34 years of age roughly because cumulative surplus amounts change into minus from this time.

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.69-75
• /
• 2022

This study aimed to develop solutions for the intermittent performance deterioration of self-propelled spinach harvesters through analysis model. The study was conducted in the following manner. First, changes in performance deterioration and surplus flow, which result from oil temperature changes, were analyzed by simulating actual sequential harvesting movements, which involve driving with actuators operated simultaneously, by analysis model developed in a previous study. Second, fundamental solutions for surplus flow problems were presented. Third, the solutions were applied to a virtual environment to present their practicality and quantitative effects. The two solutions based on the study results were as follows. First, a closed center-type directional control valve was applied to the hydraulic circuit. Second, an unloading system was set up through an on-off solenoid valve.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1985년도 제27회 수공학연구발표회논문초록집
• /
• pp.87-89
• /
• 1985

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.26-33
• /
• 2022

This study dealt with a self-propelled spinach harvester, which is capable of carrying out sequential harvesting work. This study aimed to find the cause of the harvester's occasional performance deterioration, which occurs in the process of simplifying the hydraulic circuit, using a multi-domain analysis model. The study was carried out in the following manner. First, a hydraulic system analysis model, which combines linear motion, rotary motion, hydrodynamic behavior, and an electrical signal, was developed through SimulationX software, specialized in multi-domain analysis. Second, a scenario for single behavior and coupled behavior was set out on an actuator basis. Third, the flow rate of the hydraulic system, which is not required for the movement of the actuator, was quantitatively analyzed. The results showed that a change in oil temperature was the cause of the harvester's occasional performance deterioration. And the higher the oil temperature, the more serious the performance deterioration, especially as the number of actuators operated simultaneously was small.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.426-430
• /
• 2008

Hot shear-welding is a process of bonding two plates together by using shearing stress in a controlled manner. This study dealt with the hot shear-welding process of two aluminum plates. These two plates were piles up in the shear-welding mold. Due to the shearing stress, these two plates were cut off longitudinally, and meantime they were welded together. During this process the control of the surplus material flow is very important, and it can be realized by designing the overlapping length and the shape of the cavity. The commercial software Deform-3D was employed to predict the effect of these two factors. The overlapping length and the shape of the cavity that presents the optimum design was then developed to get a good shear-welding process.

• 한국산학기술학회논문지
• /
• 제17권4호
• /
• pp.325-331
• /
• 2016

대형 빌딩에 설치된 냉각탑의 순환수를 이용한 소수력 발전용 수차를 개발하기 위해 펠톤 수차설계를 상용코드인 CFX를 사용한 전산유체 해석을 통해 수행하였다. 소수력 발전용 펠톤 수차의 최적설계를 구하기 위해 파이프 단면에 적합한 형태로 펠톤 휠을 절단한 버킷 모양과 버킷 개수 등 관련 주요 설계 인자를 변화시키며 수차 특성을 해석하여 수차 성능에 대한 영향을 평가하였다. 전산수치 해석에 의한 펠톤 수차설계 방법을 검증하기 위해 축소된 크기의 수차를 제작하고 실험을 통한 벤치마크 시험을 수행하였다. 초음파유량계와 압력 트랜스듀서, 오실로스코프를 사용하여 측정한 유동특성과 출력을 수치해석 결과와 비교하여 수치해석 설계방법의 타당성을 증명하였다. 또한 전산수치 해석을 통해 원하는 출력을 얻기 위한 버킷의 모양과 개수를 선정하여 냉각탑이 설치된 대형빌딩에서 건물 내의 냉각수 순환평균속도는 1.2 m/s이고 빌딩의 높이는 30 m인 경우에 대해 순환하는 냉각수인 잉여수를 이용한 kW급 소수력 발전용 펠톤 수차의 개발 가능성을 확인하였다.

• 한국건설순환자원학회논문집
• /
• 제5권3호
• /
• pp.84-93
• /
• 2010

지중전력선과 같은 원형 지하매설관의 경우 관의 하단부 다짐효율이 낮아 파손등과 같은 구조적 문제점에 항상 노출되어 있다. 이러한 문제점들 때문에 다양한 방법들이 강구되어 왔으며 그중 하나가 유동성이 뛰어난 저강도 콘크리트의 개발이다. 외국에서는 이미 오래전부터 연구개발을 진행하여 전력회사를 중심으로 이미 실용화 단계에와 있다. 하지만, 국내에서는 일반구조물에 대한 연구는 진행되었으나, 야간시간대 급속시공이 필요한 지중전력선 공사에 적용되는 급결 유동성 뒤채움재에 대한 연구는 최근에 이루어지기 시작했다. 본 논문에서는 고유동성을 지니고 급속 고화가 가능한 현장 굴착토를 활용한 유동성 뒤채움재에 대한 역학적 특성 및 3차례에 걸쳐서 실내모형 및 실물실험을 수행한 결과, 유동성은 교반시작 이후 약 9~15분내 타설 한계 유동성(160 mm)에 도달하는 것으로 확인되었고, 재료의 부력은 타설 초기에 급격히 발생하고 이후 점차 소산하는 것으로 확인되었으며, 그 값은 재료의 단위중량으로 계산한 이론부력의 약 70 %로 계측되었다. 본 연구에서 실험을 통해서 도출한 시공방법(배치플랜트를 이용한 타설, 스페이서 설치간격 1.8 m 및 타설 간격 2 m)을 적용시 시공품질, 작업성 및 구조적 안정성을 확보 할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.602-605
• /
• 2007

Soybean and rape seed are common feedstocks for biodiesel product ion in USA and Europe, respectively. On the other hand, South Eastern countries like Malaysia and Indonesia have surplus palm crops. However due to substantial amount of saturated fats in palm, the palm biodiesel has poor low temperature properties. To improve the low temperature flow properties as biodiesel, the dependence of the cold filter plugging point (CFPP) on the fatty acid compositions was examined. Two different kinds of biodiesels, palm and soybean biodiesels, were blended with the different volume ratios. And the low temperature flow properties of 0.5%, 1%, and 5% biodiesel in diesel blend fuels was tested. The decrease of CFPP was not observed for BD1 with Palm BD. Also, WDI test didn't exceed in the range of 4oC by the mixing of Palm BD upto 5% in commercial diesels.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.1-5
• /
• 2014

When renewable sources are connected to the distribution network in the form of a distributed generators(DGs), the effect of intermittent output appears as voltage fluctuation. The surplus power at the consumer ends results in the reverse power flow to the distribution network. This reverse power flow causes several problems to the distribution network such as overvoltage. Application of the reactive power control equipment and power flow control by means of BTB inverter have been suggested as the general solutions to overcome the overvoltage, but they are not economically feasible since they require high cost devices. Herein, we suggest the feeder loop line switch control method to solve the problem.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.162-169
• /
• 2009

In summer electrical energy is consumed in very high rate. It is used to operate conventional air conditioning system. Hot and humid air can germinate mould spores, encourage ill health, and create physiological stress (discomfort). Dehumidifier solar cooling effect is the one alternative solution saving electrical energy. We use surplus heat energy in the summer, to get cooling effect and then to get human reach to comfort condition. These devices have two system, dehumidifier and regeneration system. This paper will be focus in dehumidifier system. Dehumidifier system use for absorbing moisture in the air and decreasing air temperature. When the liquid desiccant as strong solution contact with the vapor air in the packed tower, it works. The heat and mass transfer performances of flow pattern in the packed tower of dehumidifier are analyzed and compared in detail. In this experiment was introduced, the flow patterns are parallel flow and counter flow. The performance of these flow patterns will calculate from air side. Which is the best flow pattern that gave huge mass transfer rate? The proposed dehumidifier flow pattern will be helpful in the design and optimization of the dehumidifier solar cooling system.