• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.244-252
• /
• 2019

Proper positioning of maxillary incisors is key to success of surgery combined treatment. Establishing surgery plan would be a difficult job if maxillary incisors are lost. Patient who lost all of her maxillary incisors due to accident came for orthodontic treatment. Through careful modification of maxillary archform, pre-surgical orthodontic treatment was conducted with four prosthetic space consolidation. Position of incisors was decided by help of 3D prosthetic set-up, and 1-jaw surgery was planned. After relative short treatment period of 28 months, final prosthesis was done. When alveolar bone loss happens, harmonious prosthesis of upper incisors is difficult. Utilizing mandibular set-back surgery and incisor positioning using 3D set-up could make a better environment for treatment outcome. Strategic pre-surgical orthodontic treatment can allow shorter time and less number of prosthetics.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.5
• /
• pp.597-603
• /
• 2017

Objective : Several surgical methods have been reported for treatment of ossification of the posterior longitudinal ligament (OPLL) in the thoracic spine. Despite rapid innovation of instruments and techniques for spinal surgery, the postoperative outcomes are not always favorable. This article reports a minimally invasive anterior decompression technique without instrumented fusion, which was modified from the conventional procedure. The authors present 2 cases of huge beak-type OPLL. Patients underwent minimally invasive anterior decompression without fusion. This method created a space on the ventral side of the OPLL without violating global thoracic spinal stability. Via this space, the OPLL and anterior lateral side of the dural sac can be seen and manipulated directly. Then, total removal of the OPLL was accomplished. No orthosis was needed. In this article, we share our key technique and concepts for treatment of huge thoracic OPLL. Methods : Case 1. 51-year-old female was referred to our hospital with right lower limb radiating pain and paresis. Thoracic OPLL at T6-7 had been identified at our hospital, and conservative treatment had been tried without success. Case 2. This 54-year-old female with a 6-month history of progressive gait disturbance and bilateral lower extremity radiating pain (right>left) was admitted to our institute. She also had hypoesthesia in both lower legs. Her symptoms had been gradually progressing. Computed tomography scans showed massive OPLL at the T9-10 level. Magnetic resonance imaging of the thoracolumbar spine demonstrated ventral bony masses with severe anterior compression of the spinal cord at the same level. Results : We used this surgical method in 2 patients with a huge beaked-type OPLL in the thoracic level. Complete removal of the OPLL via anterior decompression without instrumented fusion was accomplished. The 1st case had no intraoperative or postoperative complications, and the 2nd case had 1 intraoperative complication (dural tear) and no postoperative complications. There were no residual symptoms of the lower extremities. Conclusion : This surgical technique allows the surgeon to safely and effectively perform minimally invasive anterior decompression without instrumented fusion via a transthoracic approach for thoracic OPLL. It can be applied at the mid and lower level of the thoracic spine and could become a standard procedure for treatment of huge beak-type thoracic OPLL.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.17 no.2
• /
• pp.121-127
• /
• 2017

Background: There are no studies regarding 4% articaine infiltration injection into the retro-molar area for an impacted lower third molar (LITM) surgery. This study aimed to evaluate the efficacy of infiltration using 1.7 ml (single cartridge: SC) of 4% articaine versus 3.4 ml (double cartridges: DC) of 4% articaine with 1:100,000 epinephrine in LITM surgery. Method: This study involved 30 healthy patients with symmetrical LITM. The patients were assigned to receive either a DC or SC of 4% articaine with 1:100,000 epinephrine as a local anesthetic for each operation. Onset, duration, profoundness, need for additional anesthetic administration, total volume of anesthetic used, vitality of the tooth, and pain score during operation were recorded. Results: The DC of 4 % articaine had a significantly higher success rate (83.3%) than did the SC (53.3%; P<0.05). The duration of soft tissue anesthesia was longer in the DC group. The intra-operative pain was higher in the SC group with a significant (P < 0.05) requirement for a supplementary local anesthetic. Conclusion: We concluded that using DC for the infiltration injection had a higher success rate, longer duration of anesthesia, less intra-operative pain, and a lower amount of additional anesthesia than SC in the surgical removal of LITM. We recommend that a DC of 4% articaine and a 1:100,000 epinephrine infiltration in the retro-molar region can be an alternative anesthetic for LITM surgery.

• The Journal of the Korean dental association
• /
• v.49 no.4
• /
• pp.211-218
• /
• 2011

Purpose: An impacted tooth is defined as a tooth that shows delayed eruption and is expected to erupt incompletely by clinical and radiograph examination despite it reaching its expected time of eruption. The aims of this study were to investigate the clinical and radiological characteristics and treatment duration and method of impacted teeth in Korean patients. Materials and Methods: For this study we used clinical records, study models, panoramic radiographs and intraoral photographs of patients who attended Gachon University Gil Hospital Orthodontic Department between 2005 and 2008. There were 164 patients with a total number of 202 impacted teeth. Results: Male patients shows a little more prevalence than female patients (1.13:1). The under 12 age group had the highest prevalence of tooth impaction, and the over 19 age group showed the least prevalence of tooth impaction. The ratio of tooth impaction between the left to right ratio was 1.73:1 and maxilla and mandible was 1.84:1. The impacted teeth were most commonly positioned buccally (76 cases, 41.5%). Full nap closure technique (108 cases, 81.2%)was most frequently used for attachment of surgical traction hooks. Maxillary canine impaction was most commonly encountered both in male and female patients. The mean treatment period was 12.2 months and the success rate of treatment was 90.3%. The canine tooth shows the longest treatment time and highest failure rate. The ankylosis was the major cause of failure. Conclusion: Impacted teeth most commonly show in left side maxilla in the under 12 age group. And it is most commonly positioned buccally. The mean treatment period was 12.2 months, and the success rate of treatment was 90.3%.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.3
• /
• pp.184-190
• /
• 2007

Objective : The authors retrospectively analyzed clinical and radiographic features of patients who developed symptomatic adjacent segment degeneration (ASD) that required re-operation. Methods : From 1995 to 2004, among 412 patients who underwent posterior lumbar fusion surgery, the authors experienced twenty-six patients who presented symptomatic ASD. Records of these patients were reviewed to collect clinical data at the first and second operations. Results : The patients were 9 males and 17 females whose mean age was $63.5{\pm}8.7$ years. Among 319 one segment and 102 multi-segment fusions, 16 and 10 patients presented ASD, respectively. Seventeen ASDs were noticed at the cephalad to fusion (65%), eight at the caudad (31%), and one at the cephalad and caudad, simultaneously (4%). All patients underwent decompression surgery. Nine patients underwent additional fusion surgeries to adjacent degenerated segments. In 17 patients who underwent only decompression surgery without fusion, the success rate was 82.4%. In fusion cases. the success rate was observed as 55.5%. There were no statistically significant factors to be related to development of ASD. However, in cases of multi-level fusion surgery, there was a tendency toward increasing ASD. Conclusion : Multi-segment fusion surgery could be associated with a development of ASD. In surgical treatment of symptomatic ASD, selective decompression without fusion may need to be considered as a primary procedure, which could reduce the potential risk of later occurrence of the other adjacent segment disease.

• Archives of Reconstructive Microsurgery
• /
• v.24 no.1
• /
• pp.7-12
• /
• 2015

Purpose: The rectus abdominis musculocutaneous (RAM) flap has contributed to the efficient reconstruction of soft tissue defects. The flap has the advantage of easy dissection, minimal donor site morbidity, and the constant vascular anatomy with long pedicle. Authors used the free RAM flap to reconstruct multi-located soft tissue defects while still considering functionality and aesthetics. We present the long-term outcomes and versatility of free RAM flaps. Materials and Methods: From 1994 to 2004, all patients who underwent soft tissue reconstruction with free RAM flap were reviewed retrospectively. The site of the reconstruction, vessels of anastomosis, type of RAM flap, and outcomes, including flap success rate, hospital stay after flap transfer, conduction of secondary procedure, flap complications, and donor-site complications were analyzed. Results: Twenty-one patients underwent 24 free RAM flaps in site of breast, face, upper extremity and lower extremity. Mean follow-up period was 36.1 months (range, 3~156 months). The overall success rate was 92% with only a loss of 2 flaps. Minor complications related to transferred flaps were necrosis of 2 partial flaps, hematoma formation in 3 cases, and a wound infection in 1 case. Donor site morbidity was not observed. Debulking surgery was performed in 4 patients, and scar revision was performed in 3 patients. Conclusion: Free RAM flap is a workhorse flap for general soft-tissue reconstruction with minimal donor site morbidity with aesthetically good results. Thus, the free RAM flaps are versatile, and sturdy for any sites of soft-tissue where reconstruction could be performed.

• The Journal of Health Technology Assessment
• /
• v.6 no.2
• /
• pp.142-147
• /
• 2018

Objectives: The purpose of this study is to evaluate the safety and effectiveness of Robot-Assisted Brain Stereotactic Surgery with a systematic review. Methods: Electronic literature was searched using KoreaMed, Ovid-MEDLINE, Ovid-EMBASE, and Cochrane Library on 6th April 2017. Two authors screened 1218 citations. Duplicated articles of 456 excluded, the remaining 762 articles were reviewed with title and abstract. Results: A total of 8 studies were selected in this review. The device used in all studies was $ROSA^{TM}$. In one cohort study comparing the intervention ($ROSA^{TM}$) with the control (conventional stereotactic surgery), hematoma was reported no significant difference between groups. In six descriptive studies, one study reported hematoma 10% (10/100) and temporary nerve impairment 6% (6/100) using the ROSA; while five descriptive study did not report any complications. In one cohort, the localization precision were 1.2 mm in the intervention group and 1.1 mm in the control group; the localization success rate as 78.2% in the intervention group and 76.2% in the control group in one cohort; and the average time for surgery as 130 min for the intervention group and 352 min for the control group in one cohort. Four studies reported the localization success rate as 100%; two out of three articles reported the overall time for surgery as 56 min and 90 min, while one article reported the time as less than one hour in 50% of patients (50/100); two articles reported in epilepsy patients, the condition after the surgery was Engel level I in 66.2%, 75% patients, Engel level II-III in 25%, 26.5% patients, and Engel level 4 in 7.3% patients. Conclusion: Robot-Assisted Brain Stereotactic Surgery is a safe and accurate technique that can significantly reduce the time for the brain stereotactic surgery. However, further studies are needed to generalize the results.

• Biomedical Engineering Letters
• /
• v.8 no.4
• /
• pp.337-344
• /
• 2018

Additive manufacturing (AM) is an alternative metal fabrication technology. The outstanding advantage of AM (3D-printing, direct manufacturing), is the ability to form shapes that cannot be formed with any other traditional technology. 3D-printing began as a new method of prototyping in plastics. Nowadays, AM in metals allows to realize not only net-shape geometry, but also high fatigue strength and corrosion resistant parts. This success of AM in metals enables new applications of the technology in important fields, such as production of medical implants. The 3D-printing of medical implants is an extremely rapidly developing application. The success of this development lies in the fact that patient-specific implants can promote patient recovery, as often it is the only alternative to amputation. The production of AM implants provides a relatively fast and effective solution for complex surgical cases. However, there are still numerous challenging open issues in medical 3D-printing. The goal of the current research review is to explain the whole technological and design chain of bio-medical bone implant production from the computed tomography that is performed by the surgeon, to conversion to a computer aided drawing file, to production of implants, including the necessary post-processing procedures and certification. The current work presents examples that were produced by joint work of Polygon Medical Engineering, Russia and by TechMed, the AM Center of Israel Institute of Metals. Polygon provided 3D-planning and 3D-modelling specifically for the implants production. TechMed were in charge of the optimization of models and they manufactured the implants by Electron-Beam Melting ($EBM^{(R)}$), using an Arcam $EBM^{(R)}$ A2X machine.

• Journal of Yeungnam Medical Science
• /
• v.35 no.2
• /
• pp.179-186
• /
• 2018

Background: To evaluate the success rate of balloon dilation and the factors possibly influencing the outcomes of balloon dilation for the ureteric strictured portion of ureteroureterostomy (UUS) site in patients with post-gynecologic surgeries. Methods: A single institution data base was screened for the patients who received balloon dilation for a treatment of ureteral stricture diagnosed after gynecologic surgery. Overall 114 patients underwent primary intra-operative UUS due to ureteral injury during gynecologic surgery. Among them, 102 patients received balloon dilation, and their medical records were retrospectively reviewed. Success of balloon dilation was defined as the condition that requires no further clinical interventions after 6 months from balloon dilation. Results: The ureter injury rate of women treated with open radical abdominal hysterectomy was highest (32 cases, 31.4%). 60 patients (60.8%) showed successful outcomes regarding dilation. All patients underwent technically successful dilation with a full expansion of balloon during the procedure, but 40 patients (39.2%) were clinically unsuccessful as they showed a recurrence of ureteral stricture on the previous balloon dilation site after the first dilation procedure. Univariate logistic regression analyses showed that stricture length >2 cm was a significant predictor of successful dilation (odds ratio, 0.751; 95% confidence interval, 0.634-0.901; p-value, 0.030), but it failed to achieve independent predictor status in multivariate analysis. Conclusion: Balloon dilation can an effective alternative treatment option for strictured portion of the primary UUS in post-gynecologic surgery patients when its length is <2 cm.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.6
• /
• pp.411-426
• /
• 2021

Combining different procedures to reduce the number of surgical sessions and patient discomfort in implant placement and sinus floor elevation has been recommended, and evidence supports good outcomes. The aim of this study was to review the results of clinical studies on sinus floor elevation through extraction sockets and simultaneous immediate posterior implant placement. An electronic search was carried out in PubMed, Scopus, and Web of Science to find English articles published in or before August 2020. A manual search was also performed. Titles, abstracts, and the full-text of the retrieved articles were studied. Thirteen studies met our eligibility criteria: 6 retrospective case series, 3 case reports, 2 prospective cohort case-series, 1 prospective case series, and 1 randomized controlled trial. Overall, 306 implants were placed; 2 studies reported implant survival rates of 91.7% and 98.57%. The others either did not report the survival rate or reported 100% survival. Sinus floor elevation through a fresh extraction socket and simultaneous immediate implant placement appears to be a predictable modality with a high success rate. However, proper case selection and the expertise of the clinician play fundamental roles in the success of such complex procedures.