• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.447-450
• /
• 2008

A storm surge is gradually increased in the Korean peninsula. Furthermore, this phenomenon is confined not only the Korean peninsula but also the whole world. A storm surge induced by storm, typhoon, or cyclone is a phenomenon that the water surface elevation is raising by the barometric pressure difference and this water level rising threatens the coastal facilities, settlement, or lives. Most of coastal region in our country are unsafe from this disaster. Even though we are not able to prevent the generation of this phenomenon, we can reduce the damages by investigating the kind of storm surge disaster. Once we finish this investigation, we can reduce the damages by offering the information for risk prior to an invasion of storm surge. This study, we analyzed the previously occurred storm surge damages, and this data can be utilized as a guide for those who live near the coastal region providing the information about the predicting scale of the storm surge

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2089-2092
• /
• 2010

There are many cases that interrupt the production process because of malfunctions caused by electronic circuit boards which control equipment, but it is difficult to distinctly identify the causes in many cases. Especially, CMOS devices with the control logic circuit return automatically to normal state after their own faults. Therefore it is not easy to analyze the problems with electronic circuit boards. Recently, nuclear power plant experienced a failure due to the malfunction of electronic circuit boards and it was identified that the reason of the malfunction was because of latch-up phenomenon caused by external surge in electronic devices. This paper presents the causes and the phenomenon of latch-up by experiment and also a way using counter EMF diodes, noise filters and surge protective devices to prevent latch-up phenomenon from electronic circuit boards, finally confirms the effectiveness of the result by experiment.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.140-147
• /
• 2001

The solenoid valve in ABS hydraulics, modulator is a two directional on-off valve and is controlled by around 100Hz high speed pulse width modulation. When the inlet valve is switched from open state to closed state, there are braking force degration, noise and vibration due to pressure surge phenomena in the hydraulic line and wheel cylinder. In this study, identifies pressure surge phenomenon in the braking process of a ABS, and investigates the way to reduce the phenomenon. For the purpose theoretical analysis on the pressure surge in the closed state hydraulic line, characteristic curve method based on wave equation was utilized. During this analysis, we could find pressure surge characteristics change due to hydraulic line change and PWM control conditions. In conclusion, by using the results of this study for the pressure surge prediction and reduction method, we could expect braking performance enhancement in Anti-Lock Braking System.

• 대한기계학회논문집B
• /
• 제39권1호
• /
• pp.89-95
• /
• 2015

터보압축기의 서지는 압축기의 불안정 운전영역으로 주로 소음과 맥동을 유발하며 수회 지속될시 압축기 시스템 전반에 걸쳐 막대한 피해를 입힌다. 압축기의 안전한 운전을 위해서는 서지현상에 대한 특성파악과 제어전략 수립이 중요하다. 서지현상의 제어는 주로 압축가스의 통과유동량 증대, 필요한 헤드 저감, 압축기 회전수 감속, 가스의 바이패스를 통하여 이루어진다. 본 연구에서는 차량용 터보차저에 서지를 유발했을 때 각 운전 구간별 발생되는 압력변동 특성을 연구하고자 한다. 서지 특성 확인을 위한 파라미터는 압축기 입구 유량과 출구 유량, 관경, 회전수 등으로 선정하였다. 입구단과 출구단 유량을 조절하여 서지 압력 변동을 조사한 결과, 출구단 보다는 입구단 유량의 급격한 변화가 서지와 압축기 내구에 더 영향이 크다는 것을 확인하였다.

• 한국공작기계학회논문집
• /
• 제12권3호
• /
• pp.38-44
• /
• 2003

The solenoid valve in ABS hydraulic modulator is a two directional on-off valve and is controlled by around 100Hz high speed pulse width modulation. When the valve is switched from open state to closed state, noise and vibration due to pressure surge phenomena in the hydraulic line and wheel cylinder are made. In this study, we identify Pressure surge phenomenon in the braking process of a ABS, and investigate the way to reduce the phenomenon. For the purpose of theoretical analysis on the pressure surge in the closed state hydraulic line, characteristic curve method based on wave equation was utilized. To reduce the surge, high frequency control of 20kHz was attempted. The result showed that the surge pressure of 50% was reduced compared to one observed in the low frequency control. Duty variation of high frequency can control current of solenoid valve and prevent sudden change of displacement.

• 조명전기설비학회논문지
• /
• 제27권3호
• /
• pp.79-86
• /
• 2013

In order to analyze the electrical performance of ZnO surge arresters stressed by the combined DC and AC voltages that are generated in DC/AC converter systems, the leakage current properties of ZnO surge arrester blocks deteriorated by impulse currents were investigated. The test specimens were deteriorated by the 8/$20{\mu}s$ impulse current of 2.5kA and the leakage currents flowing into the deteriorated zinc oxide(ZnO) arrester blocks subjected to the combined DC and power frequency AC voltages are measured. As a result, the leakage currents flowing through deteriorated ZnO surge arrester blocks were higher than those flowing through the fine ZnO surge arrester blocks and the larger the injection number of 8/$20{\mu}s$ impulse current of 2.5kA is, the greater the leakage current is. The leakage current-voltage curves(I-V curves) of the fine and deteriorated ZnO surge arrester blocks stressed by the combined DC and AC voltages show significant difference in the low conduction region. Also the cross-over phenomenon is observed at the voltage close to the knee of conduction on plots of I-V curves.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.115-117
• /
• 1996

The electrical stress, which is generated by switching devices, has been affected by various kinds of factors such as surge impedance, motor capacity, surge wavefront and so forth. In this study, the surge phenomenon delivered into motor winding in switching was analyzed with actual system.

• 대한조선학회논문집
• /
• 제33권1호
• /
• pp.124-134
• /
• 1996

본 연구에서는 LNG선의 화물하역 중 비상 상황시 펌프를 정지시키고 선박측의 긴급 차단 밸브 및 육상측의 정지 밸브를 폐쇄시킬 때, 관내 유체의 급격한 속도변화에 의하여 발생하는 비정상 유동 상태인 서지(Surge)현상의 원인을 고찰하고, 이 때 발생하는 상승압력과 유량의 변화를 계산하였다. 해석 결과에 의하면 서지현상에 의한 과도한 압력상승은 선박측의 긴급 차단 밸브 및 육상측의 정지 밸브의 종류와 이들의 폐쇄 시간, 그리고 배관 배치에 크게 영향을 받음을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.86-89
• /
• 1991

In recent years, Vacuum Circuit Breaker(VCB) has been widely used to enhance the confidence and at the same time to ease maintenance of waterworks requipment as the power supply breaker of high voltage motor. When making and breaking the sources as VCB the powerful surge voltage, repetitive reignition phenomenon resulted from exceeding inter-pole endurance voltage of CB, has occured. It has transmitted to the winding of motor stator through the cable, and this surge voltage is repeated over and over again before finishing making and breaking action of CB according to cumulation of repetitive reignition surge, motor has become burned in the end. This paper describes surge voltage occuring in making and breaking of VCB as circuit parameters by transient phenonenon and examines closely the variance of peak values, wavefront-length, wavetail-length, when changing inductance and capacitance of a cable. Finally we will expect to protect motor winding breakdown from surge voltage through parallel connection of suitable-size in the motor.

• 한국화재소방학회논문지
• /
• 제23권2호
• /
• pp.55-61
• /
• 2009

본 연구에서는 서지나 순간 과전압 등에 의한 과도현상으로부터 보호될 수 있는 높은 신뢰성의 화재수신기가 될 수 있도록 과도현상 보호시스템의 개발에 대한 연구를 수행하였고, 보호시스템의 성능을 시험으로 입증함으로써 과도현상 보호시스템을 개발할 수 있는 기틀을 마련하였다. 과도현상 보호시스템의 개발을 위한 프로세스 정립과 이론을 바탕으로 과도현상으로부터 보호될 수 있는 1단계 및 2단계 보호시스템을 개발하였고, 소방법 및 관련규정에서 제시하는 제반 성능조건으로 시험하고 만족스런 결과를 얻음으로써, 과도현상 보호시스템을 개발할 수 있는 엔지니어링 데이터 구축과 원천기술을 확립하였다.