• Journal of Conservation Science
• /
• v.35 no.2
• /
• pp.159-168
• /
• 2019

Plasticizers, which are added to plastics, can cause exudation, which means that the plasticizer comes out from surface of the plastics. This causes the surface of plastic artworks to become sticky, and this allows dust and pollutants to become attached to the surface. Therefore, in this study, the degradation characteristics and chemical cleaning methods of each type of plasticizer are evaluated using PVC specimens. To evaluate the degradation characteristics and chemical cleaning methods, microscopic observation, chromaticity and weight measurement, and FT-IR spectroscopy were performed. The results showed that PVCs containing different plasticizers have different degradation patterns. Especially, the PVC containing TOTM showed discoloration and exudation. In the evaluation of the chemical cleaning methods, ethyl alcohol and KOH solution showed good effects, but their stability was not good. Surfactant was found to have a good cleaning effect and stability as a cleaner for exudated plasticizers.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.303-307
• /
• 2019

Sophorolipid is a biological surfactant of the glycolipid structure produced by Candida bombicola, which generally exists as a mixture of acidic and lactonic forms. In this study, we investigated physico-chemical properties, antibacterial activities, and cytotoxicity of the sophorolipid containing more than 96% of the lactonic form, produced by the gene regulation of production strains and application of a metabolic engineering technique. The lactonic sophorolipid showed a weak acidity in the range of pH 3.2~4.6 when diluted in water at the concentrations from 1 to 0.001 wt%. The $pK_a$ value of the lactonic sophorolipid was estimated to be around 4.3 from the acid-base titration curve. The critical micelle concentration (CMC) of the lactonic sophorolipid was $10^{-2}wt%$, at which the surface tension of aqueous solution was reduced to 36 mN/m. The lactonic sophorolipid showed the minimum inhibitory concentrations (MIC) of $1{\times}10^{-3}$ and $5{\times}10^{-3}g/mL$ against Propionibacterium acnes and Corynebacterium xerosis, respectively. The MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide] assay showed that cytotoxicity of the lactonic sophorolipid was ten times lower than that of triclosan.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.1
• /
• pp.17-27
• /
• 2023

A study was performed to increase skin permeation of tocopheryl acetate, an oil-soluble component among tocopheryl acetate, salicylic acid, and niacinamide, which are the active ingredients of the anti-hair loss toner. As a method of transparently solubilizing tocopheryl acetate while containing salicyl acid and niacinamide, we used a swollen micelle structure that increased the size of the micelle formed by the aggregation of surfactants. The prepared swollen micelle solution contains three kinds of active ingredients, and poloxamer 407 and octyldodeceth-16 were used as surfactants to increase transparent properties and stability. In addition, isostearic acid was used as a co-surfactant to increase the size of micelles. To evaluate the physical properties of the prepared swollen micelles, turbidity at room temperature (25 ℃) was measured. The Franz diffusion cell method was used to evaluate the skin permeation rate of tocopheryl acetate among the hair-loss prevention components contained in swollen micelles. After 24 h, tocopheryl acetate showed a 6-fold improvement in skin permeation compared to the control group. Therefore, it can be seen that the swollen micelles developed in this study can be applied to hair-loss prevention products or solubilized formulations of various functional cosmetics.

• Journal of the Korean Chemical Society
• /
• v.38 no.10
• /
• pp.753-762
• /
• 1994

Dephosphorylation of diphenyl- or isopropylphenyl-4-nitrophenylphosphinate (DPNPIN or IPNPIN) mediated by $OH^-$ or o-iodosobenzoate ion ($IB^-$) are relatively slow in aqueous solution. The reactions in CTAX micellar solutions are, however, very accelerated, because CTAX micelles can accommodate both reactants in their Stern layer in which they can easily react, while hydrophilic $OH^-$(or $IB^-$) and hydrophobic phosphinates are not mixed in water. Even though the concentrations (> $10^{-3}$ M) of $OH^-$(or $IB^-$) in CTAX solutions are much larger amounts than those ($6{\times}10^{-6}$ M) of phosphinates, the rate constants of the dephosphorylations are largely influenced by change of the concentration of the ions, which means that the reactions are not followed by the pseudo first order kinetics. In comparison to effect of the counter ions of CTAX in the reactions, CTACl is more effective on the dephosphorylation of DPNPIN (or IPNPIN) than CTABr due to easier expelling of $Cl^-$ ion by $OH^-$(or $IB^-$) ion from the micelle, because of easier solvation $Cl^-$ ion by water molecules. The reactivity of IPNPIN with $OH^-$(or $IB^-$) is lower than that of DPNPIN. The reason seems that the 'bulky' isopropyl group of IPNPIN hinders the attack of the nucleophiles. The mechanism of reaction of IPNPIN with IB- ion concluded as 'nucleophilic' instead of 'general basic' by a trapping experiment and a measured kinetic isotope effect.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.329-336
• /
• 2014

As an abiotic stress, chilling stress is one of the major factors limiting plant growth and increasing susceptibility to pathogens. Therefore, enhancing stress tolerance in plants is an important strategy for their survival under unfavorable environmental conditions. The objective of this study was to determine the effects of the exogenous application of salicylic acid (SA) or nitric oxide (NO) on chilling tolerance in pepper seedlings. Pepper (Capsicum annuum L. 'kidaemanbal') seedlings were grown under normal growing conditions ($20/25^{\circ}C$, 15 hours photoperiod, $145{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, fluorescence lamps) for 23 days after transplanting. The solution (3 mL) of 1 mM SA and 0.3 mM NO with surfactant triton 0.1% were sprayed two times a week, respectively. Right after the completion of chemical application, seedlings were subjected to chilling condition at $4^{\circ}C$ for 6 hours under dark condition and then the seedlings were recovered at the normal growing conditions for 2 days. In order to assess plant tolerance against chilling stress, growth characteristics, chlorophyll fluorescence (Fv/Fm), and membrane permeability were determined after chilling stress imposition. Total phenolic concentration and antioxidant capacity were measured during the whole experimental period. Disease incidence for pepper bacterial spot and wilt was also analyzed. Pepper seedlings treated with SA or NO were maintained similar dry mass ratio, while the value in control increased caused by chilling stress suggesting relatively more water loss in control plants. Electrolyte leakage of pepper seedlings treated with SA or NO was lower than that of control 2 days after chilling treatment. Fv/Fm rapidly decreased after chilling stress in control while the value of SA or NO was maintained about 0.8. SA increased higher total phenolic concentration and antioxidant capacity than NO and control during chemical treatment. In addition, increase in total phenolic concentration was observed after chilling stress in control and NO treatment. SA had an effect on the reduction of bacterial wilt in pepper seedlings. The results from this study revealed that pre-treatment with SA or NO using foliar spray was effective in chilling tolerance and the reduction of disease incidence in pepper seedlings.

• Journal of the Korean Society of Safety
• /
• v.7 no.2
• /
• pp.63-70
• /
• 1992

The aim of this research is to obtain a basic quantitative understanding of the effect of a noncondensable gas on the absorption of water vapor by a $H_2O$ / LiBr combination with n-octanol as the surfactant. Nonflowing aqueous solutions of LiBr (40,45,50 mass％) were exposed to saturated water vapor following the addition of an n-octanol sufactant (0.01 and 0.6 mass％). A small amount of a noncondensable gas (air) was allowed into the absorber (0.03 volume％) and its effect was analyzed by measuring the amount of water vapor absorbed. This study will aid to predict the performance of heat pump and safety operating condition when the noncondensable gas is not allowed in the absorber The results indicate that, in the presence of small amounts of a noncondensable gas, vapor absorption enhancement ratios are less than half o( those obtained under the same experimental conditions when a noncondensable gas is not present (1). The presence of a noncondensable gas causes the partial vapor pressure of air to increase at the vapor / liquid interface, which results in an instability of vapor absorption rate nd. hence, in an inhibition of interfacial disturbance.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.97-105
• /
• 1989

This study deals with micellar effects on hydrolyses of p-nitrophenyl carboxylic esters(p-NPCE) mediated by 2-alkylbenzimidazole(R-BI) and sodium 2-alkylbenzimidazole-5-sulfonate(R-BISO$_3$Na) in aqueous and CTABr solutions. The reactions mediated by R-BI and R-BISO$_3$Na in micellar solutions are obviously slower than those by benzimidazole(BI) and sodium benzimidazole-5-sulfonate(BISO$_3$Na) respectively, and the reaction rates were decreased with increase of lengths of alkyl groups. This prestents a striking contrast to the reactions in aqueous solutions without added CTABr, of which the reaction rates are on approximately same levels. It seems due to steric effect of alkyl groups for R-BI and R-BISO$_3$Na in the Stern layer of micelle, and it is supported by measured activation parameters(${\Delta}H^{\neq},\;{\Delta}G^{\neq}\;and\;{\Delta}S^{\neq}$) of the reactions in aqueous and micellar solutions. In addition to nucleophilic ability of benzimidazole(BI) moiety of R-BISO$_3$Na on the reactions, these compounds with long alkyl groups(nonyl to pentadecyl) which form a micelle of themselves increase the reaction rates due to their micellar catalyses in aqueous solutions, not including CTABr. We measured the isotope effects to elucidate the mechanism of hydrolyses of p-nitrophenyl carboxylic esters, and the relative first order rate constant($k'_{H_2O}/k'_{D_2O}$) are on range of 2.5∼3.2. This range is too high to conclude that the hydrolyses of p-NPA mediated by various R-BISO$_3$Na proceed by nucleophilic mechanism. In other words, the reactions are assumed to proceed in part by general basic one, as compared with the reaction catalyzed by imidazole(IM) in aqueous solution.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.131-137
• /
• 2012

Polyaniline (PANI) and polypyrrole (Ppy) hollow sphere structures with controlled shell thicknesses can be easily synthesized than those of using a layer-by-layer method for cathode active material of lithium-ion batteries. Polystyrene (PS) core was synthesized by emulsion polymerization using an anion surfactant. The shell thicknesses of PANI and Ppy were controlled by amounts of aniline and pyrrole monomers. PS was removed by an organic solution. This structure increased in contact with an electrolyte and a specific capacity in lithium-ion batteries. But polymers have disadvantages such as the difficult control of molecular weights and low densities. These disadvantages were completed by controlled shell thicknesses. The amount of aniline monomer increased from 1.2, 2.4, 3.6, 4.8 to 6.0 mL, and the shell thicknesses were 30.2, 38.0, 42.2, 48.2, and 52.4 nm, respectively. And the amount of pyrrole monomer was 0.6, 1.2, 2.4 and 3.6 mL, the shell thicknesses were 16.0, 22.0, 27.0 and 34.0 nm, respectively. In the cathode materials with controlled shell thicknesses, shell thicknesses of the PANI hollow spheres were 30.2, 42.2, and 52.4 nm, and discharge specific capacities of after 10 cycle were ~18, ~29, and ~62 mAh/g, respectively. The shell thicknesses of the Ppy hollow spheres were 16.0, 22.0, 27.0 and 34.0 nm, and discharge specific capacities of after 15 cycle were ~15, ~36, ~56, and ~77 mAh/g, respectively. Thus, shell thicknesses of PANI and Ppy increased, the specific capacities increased.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.51-58
• /
• 2005

Alkyl ethoxy sulfate type surfactants, widely used in commercial cleansers, are easily adsorbed to skin to often cause skin irritation and inflammation if not thoroughly rinsed nut. In order to replace or complement existing surfactants, we screened the existing surfactants through protein denaturation method, cell cytotoxicity assay and human IL-1$\alpha$ assay, etc. Fourteen surfactants have been chosen from among too irritant anionic, cationic and/or zwitter-ionic ones and investigated for cell cytotoxicity in human fibroblast cell lines using monolayer culture with the thirteen commercially available cleansers for sensitive skin. From these results, we selected 5 surfactants and 2 commercial cleansers (names not shown), such as sodium laureth sulfate (anionic), sodium cocoyl isethionate (anionic), sodium lauroamphoacetate (zwitter-ionic), and cocamidopropyl betaine (zwitter-ionic), alkyl polyglycoside (non-ionic). 20 formulations were made out of 5 surfactants and five of them were chosen through a protein denaturation method (lower than 3 M sodium dodecyl sulfate solution ($13.2\%$)), cell cytotoxicity and human patch test. These five selected formulations containing preservatives were compared to two selected commercial cleansers by cell cytotoxicity and human IL-1$\alpha$ ELISA assay using dermal equivalent. Finally, we selected the best formulation. To this formulation, fructan ($3\%$ or $5\%$) or/and portulaca extract ($3\%$ or $5\%$) well known for its anti-inflammatory and moisturizing effects were added and investigated for cell cytotoxicity using dermal equivalent. In cytotoxicity assay using dermal equivalent, two formulations containing $5\%$ fructan and $3\%$ or $5\%$ portulaca extract were less toxic than the others. In cytotoxicity assay and human IL-1$\alpha$ ELISA using 3D culture, the selected formulation containing $5\%$ fructan and $5\%$ portulaca extract showed better efficiency than those of the others and 2 commercial cleansers. As a result, we could develop a low irritant and safe liquid cleanser.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.173-178
• /
• 2022

A lateral flow immunoassay (LFIA) method using carbon nanodot@silica as a signaling material was developed for analyzing the concentration of retinol-binding protein 4 (RBP4), one of the lung cancer biomarkers. Instead of antibodies mainly used as bioreceptors in nitrocellulose membranes in LFIA for protein detection, aptamers that are more economical, easy to store for a long time, and have strong affinities toward specific target proteins were used. A 5' terminal of biotin-modified aptamer specific to RBP4 was first reacted with neutravidin followed by spraying the mixture on the membrane in order to immobilize the aptamer in a porous membrane by the strong binding affinity between biotin and neutravidin. Carbon nanodot@silica nanoparticles with blue fluorescent signal covalently conjugated to the RBP4 antibody, and RBP4 were injected in a lateral flow manner on to the surface bound aptamer to form a sandwich complex. Surfactant concentrations, ionic strength, and additional blocking reagents were added to the running buffer solution to optimize the fluorescent signal off from the sandwich complex which was correlated to the concentration of RBP4. A 10 mM Tris (pH 7.4) running buffer containing 150 mM NaCl and 0.05% Tween-20 with 0.6 M ethanolamine as a blocking agent showed the optimum assay condition for carbon nanodot@silica-based LFIA. The results indicate that an aptamer, more economical and easier to store for a long time can be used as an alternative immobilizing probe for antibody in a LFIA device which can be used as a point-of-care diagnosis kit for lung cancer diseases.