• Journal of the Korean Chemical Society
• /
• v.59 no.5
• /
• pp.407-412
• /
• 2015

A preconcentration procedure for determination of palladium by laser thermal lens spectrometry (TLS) is proposed. It is based on cloud point extraction of palladium(II) ions as 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminoaniline (3,5-diCl-PADMA) complexes using octylphenoxypolyethoxyethanol (Triton X-114) as surfactant. The effects of various experimental conditions such as pH, concentration of ligand and surfactant, equilibration temperature and time on cloud point extraction were studied. Under the optimized conditions, the calibration graph was linear in the range of 0.15~6 ng mL⁻¹, and the detection limit was 0.04 ng mL⁻¹ with an enrichment factor of 22. The sensitivity was enhanced by 846 times when compared with the conventional spectrophotometric method. The recovery of palladium was in the range of 96.6%~104.0%. The proposed method was applied to the determination of palladium in water samples.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.1
• /
• pp.59-65
• /
• 1999

For a cosmetic plant wastewater containing surfactants of high concentration, adsorption treatment by granular activated carbon(GAC) having different pore size distribution was studied. Three sorts GACs were used and regenerated afterwards with methanol. Experiments were composed of batch process and column test for both virgin and regenerated GACs. Following conclusions were drawn from the study: Methylene blue activating substance(MBAS) adsorption data from the batch tests for three GACs are described well by BET isotherm and Freundich isotherm. Simulation with the BET isotherm shows that maximum adsorption appears to be affected not only by specific surface area but also by pore size distribution. Maximum adsorption from the BET isotherm for MBAS appears to diminish as the number of reactivation increases. The diminishing ratio of maximum adsorption appears to decrease as the pore size decreases. Recovery ratio of the methanol by vacuum evaporation from the spent methanol ranges from 95% to 97%.

• Analytical Science and Technology
• /
• v.13 no.1
• /
• pp.22-26
• /
• 2000

2-Hydroxybenzaldehyde-5-Nitro-pyridylhydrazone (2HB-5NPH) was synthesized and its application in the spectrophotometric determination of vanadium ion(IV) was studied in the presence of surfactant. The optimum conditions of pH, solvent effect, concentration of ligand and surfactant were evaluated. The procedure was applied to determination of vanadium (IV) in mixture sample and real sample with satisfactory results (recovery ${\geq}$ 97% ; relative standard deviation ${\leq}$ 3.0% in the concentration range of $0{\sim}1.5{\mu}g/mL$ ; detection limit, $0.02{\mu}g/mL$ in solution).

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.99-107
• /
• 1997

In this study, a series of batch-scale tests were conducted to optimize the design parameters for the application of soil washing techniques to the hydrophobic organic compounds(HOCs)-contaminated soil and to find the effective methods for the recovery of surfactants from washing effluent by using solvent. Several nonionic surfactants (polyoxyethylene oleyl ester) and sophorolipid were applied to the artificially contaminated soil (4,000 mg n-dodecane/kg dry soil). The effects of washing time, concentration of surfactant solution, dilution ratio, and temperature on washing efficiencies were examined. Hydrophile-liphophile balance (HLB) number was proven to be one of the important parameters for soil washing. The HLB numbers of OA-5 and sophorolipid are too low to form a stable soil-water emulsion. They showed very low washing efficiencies less than 10e1o. If HLB number is in the proper range to form a stable soil-water emulsion, surfactant having higher solubility for HOCs shows higher washing efficiency. OA-14 having higher HLB number than OA-9 formed more stable soil-water emulsion. But its washing efficiency was about 20% due to a lower molar solubility ratio (MSR) than OA-9. OA-9, which forms a stable soil-water emulsion and has comparatively high sotubility for HOCs, showed about 60% washing efficiency by itself. To recover anthracene effectively from OA-9 washing effluent by using benzene as an organic solvent, desirable temperature and pH were $30^{\circ}C$ and 2, respectively.

• Analytical Science and Technology
• /
• v.7 no.4
• /
• pp.441-453
• /
• 1994

Two extraction methods, liquid-liquid extraction(LLE) and solid-phase extraction(SPE), coupled with GC/MS were compared as preconcentration procedures for priority pollutants in water. Among the semi-volatile priority pollutants, 11 acid and 44 base/neutral compounds were spiked in reagent water. With LLE, which is a modification of EPA Method 625, the overall mean recovery of the 54 compounds was 91% with a mean relative standard deviation(RSD) of 4.6%. With SPE, the overall mean recovery of the 52 compounds was 53% with a mean RSD of 8.9%. The detection limits of both methods were in the range of $1{\sim}5{\mu}g/l$.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.3 no.3 s.3
• /
• pp.48-55
• /
• 2005

The summary of a study of efficacy of Rose essential oil and Lavender essential oil against physiologic active change s of skin caused to surfactant is as follows. 1. In feed intake efficiency, there is more significant difference than control group, and then in water intake, there are significant differences between each group. It is presented that the water intake efficiency ratio of the group treated by Rose essential oil and Lavender essential oil is higher than all of groups to be participated in experiment. And then, the reason that the group treated Lavender essential oil is lower than any other group is needed water intake to be caused by stress. 2. As the result of serum analysis, in atherosclerotic index(A.I), the cholesterol of control group is higher than that of the group treated. As HDL cholesterol is activated, the dan1aged group is higher than control group, in LDL cholesterol the control group is higher. It is seen that the damaged group of the quantity of HDL cholesterol is lower frequently in A.I. This fact is presented that HDL cholesterol that cholesterol is exhausted is changed, because of the dan1aged group that replacement is activated. 3. As the observed result of alteration of sebaceous glands, it is appeared that the demage of sebaceous glands is destroyed in the damaged group. It is observed that epidermis of the group applied by Rose essential oil after treated surfactant is dry, secretion of phenomenon of water and sebum is appeared more. It is observed that the epidermis recovery of the group applied by Lavender essential oil after treated surfactant is insufficient. And then it is seen that stratum corneum is recovered and the quantity of sebum secretion is decreased. 4. As the observed result of alteration of Mast cell group treated by Rose essential oil and Lavender essential oil for 3 weeks Luna's stain(${\times}100$), it is observed that the damaged group treated by Lavender essential oil is numerous in alteration of mast cell's number and Mast cell's size is larger than the dan1aged group. It is presented that the Mast cell's number and Mast cell's size is larger than the damaged group, the Mast cell's size and quantity of the group treated by Rose essential oil and Lavender essential oil is decreased more.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.545-549
• /
• 2002

A simple and rapid technique for the separation and preconcentration of lead in water and biological samples has been devised. Preconcentrationis based on the depositionof analyte onto a column packed with dithizone immobilized on sodium dodecyl sulfate coated alumina at pH $\geq$ 3. The trapped lead is eluted with 5 mL of 4 M nitric acid and determined by flame atomic absorption spectroscopy. A sample of 1 L, results in a preconcentration factor of 200 and the precision at 20${\mu}g$ $L^{-1}$ is 1.3%(n=8). The procedure is applied to tap water, well water, river water, vegetable extract and milk samples, and accuracy is assessed through recovery experiments and by independent analysis by furnace atomic absorption.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.191-201
• /
• 2019

Petroleum industry produces one of the popular hazardous waste known as Petroleum Sludge. The treatment and disposal of petroleum sludge has created a major challenge in recent years. This review provides insights into various approaches involved in the treatment, and disposal of petroleum sludge. Various methods used in the treatment and disposal of petroleum sludge such as incineration, stabilization/solidification, oxidation, and bio-degradation are explained fully and other techniques utilized in oil recovery from petroleum sludge such as solvent extraction, centrifugation, surfactant EOR, freeze/thaw, pyrolysis, microwave irradiation, electro-kinetic method, ultrasonic irradiation and froth flotation were discussed. The pros and cons of these methods were critically considered and a recommendation for economically useful alternatives to disposal of this unfriendly material was presented.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.2 no.1
• /
• pp.167-176
• /
• 1978

The effect of additives in final rinse water during laundering on soiling, soil removal and some properties of fabrics has been studied with various fabrics. The additives examined were fabric softener (Sta-Puf), cationic surfactant (Apole PS), sizing materials such as CMC, PYA, cornstarch and mixture of CMC and cationic surfactant. The results obtained may be summerized as follows. L Addition of additives except PVA in final rinse water generally reduce the deposition of carbon-$CCl_4$ soil and it seems to be rather independant of the concentration of additives. The effect of additives on soil resistant is found to increase in the following order. cotton; Apole

• Environmental Engineering Research
• /
• v.16 no.4
• /
• pp.219-225
• /
• 2011

The objective of this study was to investigate the bacterial adhesion to iron (hydr)oxide-coated sand (IHCS) and aluminum oxidecoated sand (AOCS) in the presence of Tween 20 (nonionic surfactant) and lipopeptide biosurfactant (anionic surfactant) through column experiments. Results show that in the presence of Tween 20, bacterial adhesion to the coated sands was slightly decreased compared to the condition of deionized water; the mass recovery (Mr) increased from 0.491 to 0.550 in IHCS and from 0.279 to 0.380 in AOCS. The bacterial adhesion to the coated sands was greatly reduced in lipopeptide biosurfactant; Mr increased to 0.980 in IHCS and to 0.797 in AOCS. Results indicate that the impact of lipopeptide biosurfactant on bacterial adhesion to metal oxide-coated sands was significantly greater than that of Tween 20. Our results differed from those of the previous report, showing that Tween 20 was the most effective while the biosurfactant was the least effective in the reduction of bacterial adhesion to porous media. This discrepancy could be ascribed to the different surface charges of porous media used in the experiments. This study indicates that lipopeptide biosurfactant can play an important role in enhancing the bacterial transport in geochemically heterogeneous porous media.